Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 10 - Energy |
Chapter II - Department of Energy |
SubChapter D - Energy Conservation |
Part 429 - Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment |
Subpart B - Certification |
§ 429.26 - Fluorescent lamp ballasts.
-
§ 429.26 Fluorescent lamp ballasts.
(a) Sampling plan for selection of units for testing.
(1) The requirements of § 429.11 are applicable to fluorescent lamp ballasts; and
(2) For each basic model of fluorescent lamp ballasts, a sample of sufficient size, not less than four, shall be randomly selected and tested to ensure that -
(i) Any represented value of the energy consumption of a basic model for which consumers would favor lower values shall be greater than or equal to the higher of:
(ii) Any represented value of the ballast luminous efficiency, power factor, or other measure of the energy efficiency or energy consumption of a basic model for which consumers would favor a higher value must be less than or equal to the lower of:
(b) Certification reports.
(1) The requirements of § 429.12 are applicable to fluorescent lamp ballasts; and
(2) Pursuant to § 429.12(b)(13), a certification report must include the following public product-specific information: The ballast luminous efficiency, the average total lamp arc power, the power factor, the number of lamps operated by the ballast, and the type of lamps operated by the ballast (i.e., wattage, base, shape, diameter, and length).
(c) Rounding requirements.
(1) Round ballast luminous efficiency to the nearest thousandths place.
(2) Round power factor to the nearest hundredths place.
(3) Round average total lamp arc power to the nearest tenth of a watt.
[76 FR 12451, Mar. 7, 2011; 76 FR 24769, May 2, 2011, as amended at 81 FR 25600, Apr. 29, 2016; 85 FR 56493, Sept. 14, 2020]