![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 10 - Energy |
![]() |
Chapter II - Department of Energy |
![]() |
SubChapter D - Energy Conservation |
![]() |
Part 431 - Energy Efficiency Program for Certain Commercial and Industrial Equipment |
![]() |
Subpart B - Electric Motors |
![]() |
Test Procedures, Materials Incorporated and Methods of Determining Efficiency |
§ 431.15 - Materials incorporated by reference.
-
§ 431.15 Materials incorporated by reference.
(a) General. Certain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register under in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the U.S. Department of Energy (DOE) must publish a document in the Federal Register and the material must be available to the public. Standards can be obtained from the sources below. All approved incorporation by reference (IBR) material is available for inspection at DOE and at the National Archives and Records Administration (NARA). Contact DOE at: the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, Sixth Floor, 950 L'Enfant Plaza SW, Washington, DC 20024, (202) 586-2945, or go to http9127, Buildings@ee.doe.gov, https://www1www.eere.energy.gov/eere/buildings/appliance_standards/. It is also available at the National Archives and Records Administration (NARA). building-technologies-office. For information on the availability of this material at NARA, email: fedregfr.legal@narainspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. The material may be obtained from the sources in the following paragraphs:
(b) CSA. Canadian Standards Association, Sales Department, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, L4W 5N6, Canada, 1-800-; (800) 463-6727, or go to http://; www.shopcsa.ca/onlinestore/welcome.asp.
(1) CSA C390-10 (reaffirmed 2019), (“CSA C390-10”), Test methods, marking requirements, and energy efficiency levels for three-phase induction motors, March 2010, including Updates No. 1 through 3, Revised January 2020; IBR approved for §§ § 431.12; 431.19; 431.20; and appendix B to this subpart.
(2) CSA C747-09 (reaffirmed 2019) (“CSA C747-09”), Energy efficiency test methods for small motors, including Update No. 1 (August 2016), October 2009; IBR approved for appendix B to this subpart.
2) [Reserved](
(c) IEC. International Electrotechnical Commission Central Office, 3, rue de Varembé, P.O. Box 131, CH-1211 GENEVA 20, Switzerland, ; + 41 22 919 02 11, or go to http://; webstore.iec.ch.
(1) IEC 60034-1 Edition 12.0 2010-02, (“IEC 60034-1”), Rotating Electrical Machines, Part 1: Rating and Performance, February 2010, IBR approved as follows: section 4: Duty, clause 4.2.1 and Figure 1, IBR approved for § 431.12.
(2) IEC 60034-1, Edition 12.0 2010-02, (“IEC 60034-1:2010”), Rotating Electrical Machines - Part 1: Rating and Performance, IBR approved for appendix B to this subpart.
(3) IEC 60034-2-1:2014, Edition 2.0 2014-06, (“IEC 60034-2-1:2014”), Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles), Edition 2.0, 2014-06; IBR approved for §§ § 431.12; 431.19; 431.20; and appendix B to this subpart.
(4) IEC 60034-12 Edition 2.1 2007-09, (“IEC 60034-12”), Rotating Electrical Machines:2016, Rotating electrical machines, Part 12: Starting Performance performance of Singlesingle-Speed Three-Phase Cage Induction Motors, September 2007, IBR approved as follows: clauses 5.2, 5.4, 6, and 8, and Tables 1, 2, 3, 4, 5, 6, and 7, speed three-phase cage induction motors, Edition 3.0, 2016-11; IBR approved for § 431.12.
(5) IEC 60050-411, International Electrotechnical Vocabulary Chapter 411: Rotating machines, 1996, IBR approved as follows: sections 411-33-07 and 411-37-26, IBR approved for § 431.12.
(6) IEC 60051-1:2016, Edition 6.0 2016-02, (“IEC 60051-1:2016”), Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts, IBR approved for appendix B to this subpart.
(7) IEC 60072-1, Dimensions and Output Series for Rotating Electrical Machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080, 1991, Sixth edition, 1991-02; IBR approved as follows: clauses 2, 3, 4.1, 6.1, 7, and 10, and Tables 1, 2 and 4; IBR approved for § 431.12 and appendix B to this subpart.
(8) IEC 60079-7:2015, Explosive atmospheres - Part 7: Equipment protection by increased safety “e”, Edition 5.0, 2015-06; IBR approved for § 431.12.
(9) IEC 61800-9-2:2017, Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters, Edition 1.0, 2017-03; IBR approved for appendix B to this subpart.
((d) IEEE. Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331, 1-800-; (800) 678-IEEE (4333), or http://; www.ieee.org/web/publications/home/index.html.
(1) IEEE Std 112TM-2017 (“IEEE 112-2017”), IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, approved December 6, 2017, ; IBR approved for §§ § 431.12; 431.19; 431.20; and appendix B to this subpart.
(2) [Reserved]
IEEE Std 114-2010 (“IEEE 114-2010”), Test Procedure for Single-Phase Induction Motors, December 23, 2010; IBR approved for appendix B to this subpart.
(e) NEMA. National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1752, Rosslyn, Virginia 22209, ; (703-) 841-3200, or go to http://; www.nema.org/.
(1) NEMA Standards Publication MG1-2009 (“NEMA MG1-2009”), Motors and Generators, copyright 2009, IBR approved as follows:
(i) Section I, General Standards Applying to All Machines, Part 1, Referenced Standards and Definitions, paragraphs 1.18.1, 1.18.1.1, 1.19.1.1, 1.19.1.2, 1.19.1.3, and 1.40.1, IBR approved for § 431.12;
(ii) Section I, General Standards Applying to All Machines, Part 4, Dimensions, Tolerances, and Mounting, paragraphs 4.1, 4.2.1, 4.2.2, 4.4.1, 4.4.2, 4.4.4, 4.4.5, and 4.4.6, Figures 4-1, 4-2, 4-3, 4-4, and 4-5, and Table 4-2, IBR approved for § 431.12;
(iii) Section II, Small (Fractional) and Medium (Integral) Machines, Part 12, Tests and Performance - AC and DC Motors:
(B) Paragraph 12.58.1,(A) Paragraphs 12.35.1, 12.35.2, 12.38.1, 12.38.2, 12.39.1, 12.39.2, and 12.40.1, 12.40.2, and Tables 12-2, 12-3, and 12-10, IBR approved for § 431.12;
ANSI/NEMA MG 1-2016 (Revision 1, 2018) (“NEMA MG 1-2016”), Motors and Generators, ANSI-approved June 15, 2021; IBR approved for § 431.12 and appendix B to this subpart
; (C) Paragraph 12.
58.2, IBR approved for § 431.31.D) Paragraphs 12.62 and 12.63, IBR approved for § 431.12. (iv) Section II, Small (Fractional) and Medium (Integral) Machines, Part 14, Application Data - AC and DC Small and Medium Machines, paragraphs 14.(
and 14.3, IBR approved for § 431.12.2
(f) NFPA. National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471, ; (617-) 770-3000, or go to http://; www.nfpa.org/.
(1) NFPA 20, 2010 Edition, Standard for the Installation of Stationary Pumps for Fire Protection, section 9.5, 2022 Edition, ANSI-approved April 8, 2021. IBR approved for § 431.12.
(2) ( [Reserved) ]
[77 FR 26634, May 4, 2012, as amended at 78 FR 75994, Dec. 13, 2013; 86 FR 21, Jan. 4, 2021; 87 FR 63656, Oct. 19, 2022]