Part 1066 - Vehicle-Testing Procedures  


Subpart A - Applicability and General Provisions
§ 1066.1 - Applicability.
§ 1066.2 - Submitting information to EPA under this part.
§ 1066.5 - Overview of this part 1066 and its relationship to the standard-setting part.
§ 1066.10 - Other procedures.
§ 1066.15 - Overview of test procedures.
§ 1066.20 - Units of measure and overview of calculations.
§ 1066.25 - Recordkeeping.
Subpart B - Equipment, Measurement Instruments, Fuel, and Analytical Gas Specifications
§ 1066.101 - Overview.
§ 1066.105 - Ambient controls and vehicle cooling fans.
§ 1066.110 - Equipment specifications for emission sampling systems.
§ 1066.120 - Measurement instruments.
§ 1066.125 - Data updating, recording, and control.
§ 1066.130 - Measurement instrument calibrations and verifications.
§ 1066.135 - Linearity verification.
§ 1066.140 - Diluted exhaust flow calibration.
§ 1066.145 - Test fuel, engine fluids, analytical gases, and other calibration standards.
§ 1066.150 - Analyzer interference and quench verification limit.
Subpart C - Dynamometer Specifications
§ 1066.201 - Dynamometer overview.
§ 1066.210 - Dynamometers.
§ 1066.215 - Summary of verification procedures for chassis dynamometers.
§ 1066.220 - Linearity verification for chassis dynamometer systems.
§ 1066.225 - Roll runout and diameter verification procedure.
§ 1066.230 - Time verification procedure.
§ 1066.235 - Speed verification procedure.
§ 1066.240 - Torque transducer verification.
§ 1066.245 - Response time verification.
§ 1066.250 - Base inertia verification.
§ 1066.255 - Parasitic loss verification.
§ 1066.260 - Parasitic friction compensation evaluation.
§ 1066.265 - Acceleration and deceleration verification.
§ 1066.270 - Unloaded coastdown verification.
§ 1066.275 - Daily dynamometer readiness verification.
§ 1066.280 - Driver's aid.
§ 1066.290 - Verification of speed accuracy for the driver's aid.
Subpart D - Coastdown
§ 1066.301 - Overview of road-load determination procedures.
§ 1066.305 - Procedures for specifying road-load forces for motor vehicles at or below 14,000 pounds GVWR.
§ 1066.310 - Coastdown procedures for vehicles above 14,000 pounds GVWR.
§ 1066.315 - Dynamometer road-load setting.
Subpart E - Preparing Vehicles and Running an Exhaust Emission Test
§ 1066.401 - Overview.
§ 1066.405 - Vehicle preparation, preconditioning, and maintenance.
§ 1066.407 - Vehicle preparation and preconditioning.
§ 1066.410 - Dynamometer test procedure.
§ 1066.415 - Vehicle operation.
§ 1066.420 - Test preparation.
§ 1066.425 - Performing emission tests.
§ 1066.430 - Performing emission tests.
Subpart F - Electric Vehicles and Hybrid Electric Vehicles
§ 1066.501 - Overview.
Subpart G - Calculations
§ 1066.601 - Overview.
§ 1066.605 - Mass-based and molar-based exhaust emission calculations.
§ 1066.610 - Dilution air background correction.
§ 1066.615 - NOX intake-air humidity correction.
§ 1066.620 - Removed water correction.
§ 1066.625 - Flow meter calibration calculations.
§ 1066.630 - PDP, SSV, and CFV flow rate calculations.
§ 1066.635 - NMOG determination.
§ 1066.695 - Data requirements.
Subpart H - Cold Temperature Test Procedures
§ 1066.701 - Applicability and general provisions.
§ 1066.705 - Symbols, abbreviations, acronyms, and units of measure.
§ 1066.710 - Cold temperature testing procedures for measuring NMOG, NOX, PM, and CO emissions and determining fuel economy.
Subpart I - Exhaust Emission Test Procedures for Motor Vehicles
§ 1066.801 - Applicability and general provisions.
§ 1066.805 - Road-load power, test weight, and inertia weight class determination.
§ 1066.810 - Vehicle preparation.
§ 1066.815 - Exhaust emission test procedures for FTP testing.
§ 1066.816 - Vehicle preconditioning for FTP testing.
§ 1066.820 - Composite calculations for FTP exhaust emissions.
§ 1066.830 - Supplemental Federal Test Procedures; overview.
§ 1066.831 - Exhaust emission test procedures for aggressive driving.
§ 1066.835 - Exhaust emission test procedure for SC03 emissions.
§ 1066.840 - Highway fuel economy test procedure.
§ 1066.845 - AC17 air conditioning efficiency test procedure.
Subpart J - Evaporative Emission Test Procedures
§ 1066.901 - Applicability and general provisions.
Evaporative and Refueling Emission Test Procedures for Motor Vehicles
§ 1066.950 - Fuel temperature profile.
§ 1066.955 - Diurnal emission test.
§ 1066.960 - Running loss test.
§ 1066.965 - Hot soak test.
§ 1066.970 - Refueling test for liquid fuels.
§ 1066.971 - Vehicle and canister preconditioning for the refueling test.
§ 1066.975 - Refueling test for LPG.
§ 1066.980 - Fuel dispensing spitback procedure.
§ 1066.985 - Fuel storage system leak test procedure.
Test Equipment and Calculations for Evaporative and Refueling Emissions
§ 1066.910 - SHED enclosure specifications.
§ 1066.915 - Enclosures; auxiliary systems and equipment.
§ 1066.920 - Enclosure calibrations.
§ 1066.925 - Enclosure calculations for evaporative and refueling emissions.
§ 1066.930 - Equipment for point-source measurement of running losses.
Subpart K - Definitions and Other Reference Material
§ 1066.1001 - Definitions.
§ 1066.1005 - Symbols, abbreviations, acronyms, and units of measure.
§ 1066.1010 - Incorporation by reference.