§ 119.49 - Contents of operations specifications.  


Latest version.
  • § 119.49 Contents of operations specifications.

    (a) Each certificate holder conducting domestic, flag, or commuter operations must obtain operations specifications containing all of the following:

    (1) The specific location of the certificate holder's principal base of operations and, if different, the address that shall serve as the primary point of contact for correspondence between the FAA and the certificate holder and the name and mailing address of the certificate holder's agent for service.

    (2) Other business names under which the certificate holder may operate.

    (3) Reference to the economic authority issued by the Department of Transportation, if required.

    (4) Type of aircraft, registration markings, and serial numbers of each aircraft authorized for use, each regular and alternate airport to be used in scheduled operations, and, except for commuter operations, each provisional and refueling airport.

    (i) Subject to the approval of the Administrator with regard to form and content, the certificate holder may incorporate by reference the items listed in paragraph (a)(4) of this section into the certificate holder's operations specifications by maintaining a current listing of those items and by referring to the specific list in the applicable paragraph of the operations specifications.

    (ii) The certificate holder may not conduct any operation using any aircraft or airport not listed.

    (5) Kinds of operations authorized.

    (6) Authorization and limitations for routes and areas of operations.

    (7) Airport limitations.

    (8) Time limitations, or standards for determining time limitations, for overhauling, inspecting, and checking airframes, engines, propellers, rotors, appliances, and emergency equipment.

    (9) Authorization for the method of controlling weight and balance of aircraft.

    (10) Interline equipment interchange requirements, if relevant.

    (11) Aircraft wet lease information required by § 119.53(c).

    (12) Any authorized deviation and or exemption granted from any requirement of this chapter that applies to the certificate holder.

    (13) An authorization permitting, or a prohibition against, accepting, handling, and transporting materials regulated as hazardous materials in transport under 49 CFR parts 171 through 180.

    (14) Any other item the Administrator determines is necessary.

    (b) Each certificate holder conducting supplemental operations must obtain operations specifications containing all of the following:

    (1) The specific location of the certificate holder's principal base of operations, and, if different, the address that shall serve as the primary point of contact for correspondence between the FAA and the certificate holder and the name and mailing address of the certificate holder's agent for service.

    (2) Other business names under which the certificate holder may operate.

    (3) Reference to the economic authority issued by the Department of Transportation, if required.

    (4) Type of aircraft, registration markings, and serial number of each aircraft authorized for use.

    (i) Subject to the approval of the Administrator with regard to form and content, the certificate holder may incorporate by reference the items listed in paragraph (b)(4) of this section into the certificate holder's operations specifications by maintaining a current listing of those items and by referring to the specific list in the applicable paragraph of the operations specifications.

    (ii) The certificate holder may not conduct any operation using any aircraft not listed.

    (5) Kinds of operations authorized.

    (6) Authorization and limitations for routes and areas of operations.

    (7) Special airport authorizations and limitations.

    (8) Time limitations, or standards for determining time limitations, for overhauling, inspecting, and checking airframes, engines, propellers, appliances, and emergency equipment.

    (9) Authorization for the method of controlling weight and balance of aircraft.

    (10) Aircraft wet lease information required by § 119.53(c).

    (11) Any authorization or requirement to conduct supplemental operations as provided by § 119.21(a)(3).

    (12) Any authorized deviation or exemption from any requirement of this chapter that applies to the certificate holder.

    (13) An authorization permitting, or a prohibition against, accepting, handling, and transporting materials regulated as hazardous materials in transport under 49 CFR parts 171 through 180.

    (14) Any other item the Administrator determines is necessary.

    (c) Each certificate holder conducting on-demand operations must obtain operations specifications containing all of the following:

    (1) The specific location of the certificate holder's principal base of operations, and if different, the address that shall serve as the primary point of contact for correspondence between the FAA and the name and mailing address of the certificate holder's agent for service.

    (2) Other business names under which the certificate holder may operate.

    (3) Reference to the economic authority issued by the Department of Transportation, if required.

    (4) Kind and area of operations authorized.

    (5) Category and class of aircraft that may be used in those operations.

    (6) Type of aircraft, registration markings, and serial number of each aircraft that is subject to an airworthiness maintenance program required by § 135.411(a)(2) of this chapter.

    (i) Subject to the approval of the Administrator with regard to form and content, the certificate holder may incorporate by reference the items listed in paragraph (c)(6) of this section into the certificate holder's operations specifications by maintaining a current listing of those items and by referring to the specific list in the applicable paragraph of the operations specifications.

    (ii) The certificate holder may not conduct any operation using any aircraft not listed.

    (7) Registration markings of each aircraft that is to be inspected under an approved aircraft inspection program under § 135.419 of this chapter.

    (8) Time limitations or standards for determining time limitations, for overhauls, inspections, and checks for airframes, engines, propellers, rotors, appliances, and emergency equipment of aircraft that are subject to an airworthiness maintenance program required by § 135.411(a)(2) of this chapter.

    (9) Additional maintenance items required by the Administrator under § 135.421 of this chapter.

    (10) Aircraft wet lease information required by § 119.53(c).

    (11) Any authorized deviation or exemption from any requirement of this chapter that applies to the certificate holder.

    (12) An authorization permitting, or a prohibition against, accepting, handling, and transporting materials regulated as hazardous materials in transport under 49 CFR parts 171 through 180.

    (13) Any other item the Administrator determines is necessary.

    [Doc. No. 28154, 60 FR 65913, Dec. 20, 1995, as amended by Amdt. 119–10, 70 FR 58823, Oct. 7, 2005; Amdt. 119–13, 75 FR 26645, May 12, 2010; Docket No. FAA–2022–1563; Amdt. No. 119–20, 88 FR 48089, July 26, 2023]