 |
Code of Federal Regulations (Last Updated: November 8, 2024) |
 |
Title 16 - Commercial Practices |
|
|
Chapter II - Consumer Product Safety Commission |
|
|
SubChapter B - Consumer Product Safety Act Regulations |
|
|
Part 1203 - Safety Standard for Bicycle Helmets |
| Subpart A - The Standard |
| § 1203.1 - Scope, general requirements, and effective date. |
| § 1203.2 - Purpose and basis. |
| § 1203.3 - Referenced documents. |
| § 1203.4 - Definitions. |
| § 1203.5 - Construction requirements - projections. |
| § 1203.6 - Labeling and instructions. |
| § 1203.7 - Samples for testing. |
| § 1203.8 - Conditioning environments. |
| § 1203.9 - Test headforms. |
| § 1203.10 - Selecting the test headform. |
| § 1203.11 - Marking the impact test line. |
| § 1203.12 - Test requirements. |
| § 1203.13 - Test schedule. |
| § 1203.14 - Peripheral vision test. |
| § 1203.15 - Positional stability test (roll-off resistance). |
| § 1203.16 - Dynamic strength of retention system test. |
| § 1203.17 - Impact attenuation test. |
| Subpart B - Certification |
| § 1203.30 - Purpose, basis, and scope. |
| § 1203.31 - Applicability date. |
| § 1203.32 - Definitions. |
| § 1203.33 - Certification testing. |
| § 1203.34 - Product certification and labeling by manufacturers (including importers). |
| Subpart C - Recordkeeping |
| § 1203.40 - Effective date. |
| § 1203.41 - Recordkeeping requirements. |
| Subpart D - Requirements For Bicycle Helmets Manufactured From March 17, 1995, Through March 10, 1999 |
| § 1203.51 - Purpose and basis. |
| § 1203.52 - Scope and effective date. |
| § 1203.53 - Interim safety standards. |
| Figures 11 and 12 to Part 1203 - Hemispherical Anvil and Curbstone Anvil |
| Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older |
| Figure 1 to Part 1203 - Anatomical Planes |
| Figure 10 to Part 1203 - Center of Gravity for Drop Assembly |
| Figure 2 to Part 1203 - ISO Headform-Basic, Reference, and Median Planes |
| Figure 3 to Part 1203 - Location of Reference Plane |
| Figure 4 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older |
| Figure 6 to Part 1203 - Field of Vision |
| Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test |
| Figure 8 to Part 1203 - Apparatus for Test of Retention System Strength |
| Figure 9 to Part 1203 - Impact Test Apparatus |
| Figures 11, 12 and 13 to Part 1203 - Hemispherical Anvil and Curbstone Anvil |