 |
Code of Federal Regulations (Last Updated: November 8, 2024) |
 |
Title 40 - Protection of Environment |
|
Chapter I - Environmental Protection Agency |
|
SubChapter E - Pesticide Programs |
|
Part 180 - Tolerances and Exemptions for Pesticide Chemical Residues in Food |
|
Subpart D - Exemptions From Tolerances |
§ 180.940 - Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).
Latest version.
-
§ 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).
Residues of the following chemical substances are exempted from the requirement of a tolerance when used in accordance with good manufacturing practice as ingredients in an antimicrobial pesticide formulation, provided that the substance is applied on a semi-permanent or permanent food-contact surface (other than being applied on food packaging) with adequate draining before contact with food.
(a) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils.
Table 1 to Paragraph (a)
Pesticide Chemical CAS Reg. No. Limits Acetal 105-57-7 When ready for use, the end-use concentration is not to exceed 100 ppm acetaldehyde ethyl cis-3-hexenyl acetal 28069-74-1 When ready for use, the end-use concentration is not to exceed 100 ppm Acetanisole 100-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 100 ppm Acetic acid, octyl ester 112-14-1 When ready for use, the end-use concentration is not to exceed 100 ppm Acetophenone 98-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm Adipic acid 124-04-9 When ready for use, the end-use concentration is not to exceed 100 ppm alcohols, C16-18, distn. residues 68603-17-8 1190630-03-5 alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C16-18 alcs. manuf 1430895-61-6 alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C20-22 alcs. manuf 1430895-62-7 Alkylbenzene sulfonates (branched and linear) of chain lengths C10-C16, including benzenesulfonic acid, dodecyl and benzenesulfonic acid, dodecyl-, sodium salt 27176-87-0
25155-30-0When ready for use, the end-use concentration is not to exceed 700 ppm Alkyl cylcohexylpropionate 2705-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5 None C10-C18-Alkyl dimethyl amine oxides 1643-20-5, 2571-88-2, 2605-79-0, 3332-27-2, 61788-90-7, 68955-55-5, 70592-80-2, 7128-91-8, 85408-48-6, and 85408-49-7 When ready for use, the end-use concentration is not to exceed 1,350 ppm Allspice oil (Pimenta officinalis Lindl.) 8006-77-7 When ready for use, the end-use concentration is not to exceed 100 ppm allyl alpha-ionone 79-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm Aluminum sulfate 10043-01-3 When ready for use, the end-use concentration is not to exceed 50 ppm 2-propen-1-aminium, N,N-dimethyl-N-propenyl-, chloride, homopolymer 26062-79-3 When ready for use, the end-use concentration is not to exceed 0.6% Ammonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm Amyl butyrate 540-18-1 When ready for use, the end-use concentration is not to exceed 100 ppm Amyl formate 638-49-3 When ready for use, the end-use concentration is not to exceed 100 ppm Amyl hexanoate 540-07-8 When ready for use, the end-use concentration is not to exceed 100 ppm Amylopectin, acid-hydrolyzed, 1-oxtenylbutanedioate 113894-85-2 None Amylopectin, hydrogen 1-octadecenylbutanedioate 125109-81-1 None p-Anisyl acetate 104-21-2 When ready for use, the end-use concentration is not to exceed 100 ppm Anisyl formate 122-91-8 When ready for use, the end-use concentration is not to exceed 100 ppm Anisyl propionate 7549-33-9 When ready for use, the end-use concentration is not to exceed 100 ppm Aspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt 144538-83-0 When ready for use, the end-use concentration is not to exceed 5000 ppm Balsam oil, Peru (Myroxylon pereirae Klotzsch) 8007-00-9 When ready for use, the end-use concentration is not to exceed 100 ppm Benzaldehyde 100-52-7 When ready for use, the end-use concentration is not to exceed 100 ppm Benzaldehyde, methyl- 1334-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm Benzene, 1,2-dimethoxy- 91-16-7 When ready for use, the end-use concentration is not to exceed 100 ppm Benzene, 2-methoxy-4-methyl-1-(1-methylethyl)- 1076-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm Benzeneacetaldehyde 122-78-1 When ready for use, the end-use concentration is not to exceed 100 ppm Benzoic acid 65-85-0 When ready for use, the end-use concentration is not to exceed 100 ppm Benzoin gum, Sumatra 9000-05-9 When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl acetate 140-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm benzyl alcohol 100-51-6 When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl benzoate 120-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm benzyl butyrate 103-37-7 When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl cinnamate 103-41-3 When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl formate 104-57-4 When ready for use, the end-use concentration is not to exceed 100 ppm benzyl isobutyrate 103-28-6 When ready for use, the end-use concentration is not to exceed 100 ppm benzyl propionate 122-63-4 When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl salicylate 118-58-1 When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl trans-2-methyl-2-butenoate 37526-88-8 When ready for use, the end-use concentration is not to exceed 100 ppm benzaldehyde, 4-methoxy- 123-11-5 When ready for use, the end-use concentration is not to exceed 100 ppm benzenemethanol, alpha-methyl-, 1-acetate 93-92-5 When ready for use, the end-use concentration is not to exceed 100 ppm benzoic acid, ethyl ester 93-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm Bicyclo(2.2.1)heptan-2-ol, 1,3,3-trimethyl- 1632-73-1 When ready for use, the end-use concentration is not to exceed 100 ppm Bicyclo(2.2.1)heptan-2-ol, 1,7,7-trimethyl-,propanoate, exo- 2756-56-1 When ready for use, the end-use concentration is not to exceed 100 ppm Bicyclo[3.1.1]heptane, 6,6-dimethyl-2-methylene- 127-91-3 When ready for use, the end-use concentration is not to exceed 100 ppm Bisabolene 495-62-5 When ready for use, the end-use concentration is not to exceed 100 ppm 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione (CAS Reg. No. 123944-63-8) 0.5% by weight Dye, coloring agent Bois de rose oil 8015-77-8 When ready for use, the end-use concentration is not to exceed 100 ppm Borneol 507-70-0 When ready for use, the end-use concentration is not to exceed 100 ppm endo-Bornyl acetate 76-49-3 When ready for use, the end-use concentration is not to exceed 100 ppm Butanoic acid, 1,1-dimethyl-2-phenylethyl ester 10094-34-5 When ready for use, the end-use concentration is not to exceed 100 ppm Butanoic acid, 3-methyl-, 2-methylpropyl ester 589-59-3 When ready for use, the end-use concentration is not to exceed 100 ppm butanoic acid, 3-oxo-, ethyl ester 141-97-9 When ready for use, the end-use concentration is not to exceed 100 ppm 2-buten-1-one, 1-(2,6,6-trimethyl-1,3-cyclohexadien-1-yl)- 23696-85-7 When ready for use, the end-use concentration is not to exceed 100 ppm 3-buten-2-one, 3-methyl-4-(2,6,6-trimethyl-2-cyclohexen-1-yl)- 127-51-5 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Buten-2-one, 4-(2,6,6-trimethyl-1-cyclohexen-1-yl)- 14901-07-6; 79-77-6 When ready for use, the end-use concentration is not to exceed 100 ppm Butryic acid 107-92-6 When ready for use, the end-use concentration is not to exceed 100 ppm Butyl acetate 123-86-4 When ready for use, the end-use concentration is not to exceed 100 ppm Butyl alcohol 71-36-3 When ready for use, the end-use concentration is not to exceed 100 ppm Butyl butyrate 109-21-7 When ready for use, the end-use concentration is not to exceed 100 ppm Butyl butyryllactate 7492-70-8 When ready for use, the end-use concentration is not to exceed 100 ppm Butyl isovalerate 109-19-3 When ready for use, the end-use concentration is not to exceed 100 ppm Butyl sulfide 544-40-1 When ready for use, the end-use concentration is not to exceed 100 ppm Butyl 10-undecenoate 109-42-2 When ready for use, the end-use concentration is not to exceed 100 ppm n-Butyl benzoate 136-60-7 When ready for use, the end-use concentration is not to exceed 15,000 ppm n-Butyl 2-methylbutyrate 15706-73-7 When ready for use, the end-use concentration is not to exceed 100 ppm n-Butyl-3-hydroxybutyrate 53605-94-0 Solvent γ-Butyrolactone 96-48-0 When ready for use, the end-use concentration is not to exceed 100 ppm Cadinene 29350-73-0; 523-47-7 When ready for use, the end-use concentration is not to exceed 100 ppm Calcium bisulfate When ready for use, the end-use concentration is not to exceed 2,000 ppm Calcium sulfate 7778-18-9 When ready for use, the end-use concentration is not to exceed 100 ppm Camphene 79-92-5 When ready for use, the end-use concentration is not to exceed 100 ppm Cananga oil 68606-83-7 When ready for use, the end-use concentration is not to exceed 100 ppm δ-3-Carene 13466-78-9 When ready for use, the end-use concentration is not to exceed 100 ppm Carvacrol 499-75-2 When ready for use, the end-use concentration is not to exceed 100 ppm 4-Carvomenthenol 562-74-3 When ready for use, the end-use concentration is not to exceed 100 ppm Carvyl acetate 97-42-7 When ready for use, the end-use concentration is not to exceed 100 ppm β-Caryophyllene 87-44-5 When ready for use, the end-use concentration is not to exceed 100 ppm Cassia bark oil 8007-80-5 When ready for use, the end-use concentration is not to exceed 100 ppm Celery seed oil 8015-90-5 When ready for use, the end-use concentration is not to exceed 100 ppm Chamomile flower, Roman, oil (Anthemis nobilis L.) 8015-92-7 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamic acid; trans-Cinnamic acid 621-82-9; 140-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm cinnamic aldehyde 104-55-2 When ready for use, the end-use concentration is not to exceed 100 ppm cinnamic alcohol 104-54-1 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamon leaf oil 84649-98-9 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl acetate 103-54-8 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl benzoate 5320-75-2 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl cinnamate 122-69-0 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl formate 104-65-4 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl isobutyrate 103-59-3 When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl propionate 103-56-0 When ready for use, the end-use concentration is not to exceed 100 ppm Citral 5392-40-5 When ready for use, the end-use concentration is not to exceed 100 ppm Citral dimethyl acetal 7549-37-3 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellal 106-23-0 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellol 106-22-9 When ready for use, the end-use concentration is not to exceed 100 ppm Citronelloxyacetaldehyde 7492-67-3 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl acetate 150-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl butyrate 141-16-2 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl formate 105-85-1 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl isobutyrate 97-89-2 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl propionate 141-14-0 When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl tiglate 24717-85-9 When ready for use, the end-use concentration is not to exceed 100 ppm Citrus, ext. 94266-47-4 When ready for use, the end-use concentration is not to exceed 100 ppm Clary oil (Salvia sclarea L.) 8016-63-5 When ready for use, the end-use concentration is not to exceed 100 ppm Cloves (Eugenia spp.) 84961-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm Cognac oil, green 8016-21-5 When ready for use, the end-use concentration is not to exceed 100 ppm Copper sulfate pentahydrate 7758-99-8 When ready for use, the end-use concentration is not to exceed 80 ppm Coriander oil (Coriandrum sativum L.) 8008-52-4 When ready for use, the end-use concentration is not to exceed 100 ppm Cornmint oil 68917-18-0 When ready for use, the end-use concentration is not to exceed 100 ppm Cuminaldehyde 122-03-2 When ready for use, the end-use concentration is not to exceed 100 ppm Currant buds black absolute (Ribes nigrum L.) 68606-81-5 When ready for use, the end-use concentration is not to exceed 100 ppm Cyclohexadiene, methyl- 30640-46-1; 1888-90-0 When ready for use, the end-use concentration is not to exceed 100 ppm Cyclohexene, 1-methyl-4-(1-methylethylidene)- 586-62-9 When ready for use, the end-use concentration is not to exceed 100 ppm 1-Cyclohexylethanol 1193-81-3 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Cyclohexylethyl acetate 21722-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm p-Cymene 99-87-6 When ready for use, the end-use concentration is not to exceed 100 ppm β-Damascone, (Z)- 23726-92-3 When ready for use, the end-use concentration is not to exceed 100 ppm δ-decalactone 705-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm γ-decalactone 706-14-9 When ready for use, the end-use concentration is not to exceed 100 ppm ε-Decalactone 5579-78-2 When ready for use, the end-use concentration is not to exceed 100 ppm Decanal 112-31-2 When ready for use, the end-use concentration is not to exceed 100 ppm Decanoic acid 334-48-5 When ready for use, the end-use concentration is not to exceed 100 ppm Decanoic acid, 4-hydroxy-4-methyl-γ-lactone 7011-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm 1-Decanol 112-30-1 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Decenal 3913-71-1 When ready for use, the end-use concentration is not to exceed 100 ppm (E)-4-Decenal 65405-70-1 When ready for use, the end-use concentration is not to exceed 100 ppm 4-Decenal 30390-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm 9-Decenal 39770-05-3 When ready for use, the end-use concentration is not to exceed 100 ppm Decyl acetate 112-17-4 When ready for use, the end-use concentration is not to exceed 100 ppm D-Glucopyranose, oligomeric, decyl octyl glycosides 68515-73-1 None 1,3-dibromo-5,5-dimethylhydantoin 77-48-5 None 1,1-diethoxy-3,7-dimethylocta-2,6-diene 7492-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm diethyl malonate 105-53-3 When ready for use, the end-use concentration is not to exceed 100 ppm Diethyl sebacate 110-40-7 When ready for use, the end-use concentration is not to exceed 100 ppm Diethyl tartrate 87-91-2 When ready for use, the end-use concentration is not to exceed 100 ppm dihydro-beta-ionone 17283-81-7 When ready for use, the end-use concentration is not to exceed 100 ppm dihydrocarvyl acetate 20777-49-5 When ready for use, the end-use concentration is not to exceed 100 ppm m-Dimethoxybenzene 151-10-0 When ready for use, the end-use concentration is not to exceed 100 ppm p-Dimethoxybenzene 150-78-7 When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Dimethoxyphenol 91-10-1 When ready for use, the end-use concentration is not to exceed 100 ppm 3,7-Dimethyl-1-octanol 106-21-8 When ready for use, the end-use concentration is not to exceed 100 ppm 2,2-Dimethyl-1,3-dioxolane-4-methanol 100-79-8 2,6-Dimethyl-4-heptanol 108-82-7 When ready for use, the end-use concentration is not to exceed 100 ppm. 2,6-Dimethyl-5-heptanal 106-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm 3,7-Dimethyl-1,3,6-octatriene 13877-91-3 When ready for use, the end-use concentration is not to exceed 100 ppm 3,7-Dimethyl-6-octenoic acid 502-47-6 When ready for use, the end-use concentration is not to exceed 100 ppm Dimethylbenzylcarbinyl acetate 151-05-3 When ready for use, the end-use concentration is not to exceed 100 ppm Dimethylcyclohex-3-ene-1-carbaldehyde 27939-60-2 When ready for use, the end-use concentration is not to exceed 100 ppm α,α-Dimethylphenethyl alcohol 100-86-7 When ready for use, the end-use concentration is not to exceed 100 ppm p,α-Dimethylstyrene 1195-32-0 When ready for use, the end-use concentration is not to exceed 100 ppm. Di-n-butyl carbonate 542-52-9 When ready for use, the end-use concentration is not to exceed 15,000 ppm Dipropylene glycol 25265-71-8 None 1-docosanol 661-19-8 γ-Dodecalactone 2305-05-7 When ready for use, the end-use concentration is not to exceed 100 ppm δ-Dodecalactone 713-95-1 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Dodecanol, (2E)- 20407-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Dodecenal 4826-62-4 When ready for use, the end-use concentration is not to exceed 100 ppm 1-eicosanol 629-96-9 Ethanol 64-17-5 None Elemi oil (Canarium spp.) 8023-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl acetate 141-78-6 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl anthranilate 87-25-2 When ready for use, the end-use concentration is not to exceed 100 ppm 4-Ethylbenzaldehyde 4748-78-1 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl benzoylacetate 94-02-0 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl butyrate 105-54-4 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl cinnamate 103-36-6 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl (2E,4Z)-2,4-decadienoate 3025-30-7 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl decanoate 110-38-3 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl formate 109-94-4 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl heptanoate 106-30-9 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl hexanoate 123-66-0 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-hexylacetoacetate 29214-60-6 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 3-hydroxybutyrate 5405-41-4 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl isobutyrate 97-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl isovalerate 108-64-5 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl laurate 106-33-2 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl levulinate 539-88-8 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-methyl-3-pentenoate 1617-23-8 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-methylbutyrate 452-79-1 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-methylpentanoate 39255-32-8 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl nonanoate 123-29-5 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl octanoate 106-32-1 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl propionate 105-37-3 When ready for use, the end-use concentration is not to exceed 100 ppm ethyl salicylate 118-61-6 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl tiglate 5837-78-5 When ready for use, the end-use concentration is not to exceed 100 ppm ethylene brassylate 105-95-3 When ready for use, the end-use concentration is not to exceed 100 ppm Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None 4-Ethylguaiacol 2785-89-9 When ready for use, the end-use concentration is not to exceed 100 ppm p-Ethylphenol 123-07-9 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl phenylacetate 101-97-3 When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 3-phenylpropionate 2021-28-5 When ready for use, the end-use concentration is not to exceed 100 ppm Eugenyl acetate 93-28-7 When ready for use, the end-use concentration is not to exceed 100 ppm FD&C Green No. 3 CAS Reg. No. 2353-45-9 None FD&C Red No. 40 25956-17-6 When ready for use, the end-use concentration is not to exceed 20 ppm FD&C Yellow No. 5 1934-21-0 When ready for use, the end-use concentration is not to exceed 1000 ppm α-Farnesene 125037-13-0; 502-61-4 When ready for use, the end-use concentration is not to exceed 100 ppm Farnesol 4602-84-0 When ready for use, the end-use concentration is not to exceed 100 ppm Farnesyl acetate 29548-30-9 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Formyl-6,6-dimethylbicyclo(3.1.1)hept-2-ene 564-94-3 When ready for use, the end-use concentration is not to exceed 100 ppm Galbanum oil (Ferula spp.) 8023-91-4 When ready for use, the end-use concentration is not to exceed 100 ppm Geranic acid 459-80-3 When ready for use, the end-use concentration is not to exceed 100 ppm Geraniol 106-24-1 When ready for use, the end-use concentration is not to exceed 100 ppm (E)-Geraniol 106-24-1 When ready for use, the end-use concentration is not to exceed 100 ppm (E)-Geraniol acetate 105-87-3 When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl benzoate 94-48-4 When ready for use, the end-use concentration is not to exceed 100 ppm. Geranyl butyrate 106-29-6 When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl formate 105-86-2 When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl isobutyrate 2345-26-8 When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl phenylacetate 102-22-7 When ready for use, the end-use concentration is not to exceed 100 ppm. Geranyl propionate 105-90-8 When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl tiglate 7785-33-3 When ready for use, the end-use concentration is not to exceed 100 ppm C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 500 ppm D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None D-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum) (CAS No. 595585-15-2) None glyceryl triacetate 102-76-1 When ready for use, the end-use concentration is not to exceed 100 ppm Guaiacol 90-05-1 When ready for use, the end-use concentration is not to exceed 100 ppm. Guaiene 88-84-6 When ready for use, the end-use concentration is not to exceed 100 ppm. Helichrysum leaf oil (Helichrysum angustifolium) 8023-95-8 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Heptalactone 105-21-5 When ready for use, the end-use concentration is not to exceed 100 ppm. Heptanal 111-71-7 When ready for use, the end-use concentration is not to exceed 100 ppm Heptanoic acid 111-14-8 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Heptanol 543-49-7 When ready for use, the end-use concentration is not to exceed 100 ppm 2-hepten-4-one, 5-methyl- 81925-81-7 When ready for use, the end-use concentration is not to exceed 100 ppm trans-3-Heptenyl 2-methylpropanoate 67801-45-0 When ready for use, the end-use concentration is not to exceed 100 ppm Heptyl acetate 112-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm Heptyl alcohol 111-70-6 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Hexalactone 695-06-7 When ready for use, the end-use concentration is not to exceed 100 ppm Hexanal 66-25-1 When ready for use, the end-use concentration is not to exceed 100 ppm Hexanoic acid 142-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm n-Hexanol 111-27-3 When ready for use, the end-use concentration is not to exceed 100 ppm Hexadecanoic acid 57-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm Hexadecanoic acid, ethyl ester 628-97-7 When ready for use, the end-use concentration is not to exceed 100 ppm ω-6-Hexadecenlactone 7779-50-2 When ready for use, the end-use concentration is not to exceed 100 ppm 2,4-Hexadienyl isobutyrate 16491-24-0 When ready for use, the end-use concentration is not to exceed 100 ppm 1-Hexanol, 3,5,5-trimethyl- 3452-97-9 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Hexenal, (2E)- 6728-26-3 When ready for use, the end-use concentration is not to exceed 100 ppm. 2-Hexen-1-ol 2305-21-7 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Hexen-1-ol, (3Z)- 928-96-1 When ready for use, the end-use concentration is not to exceed 100 ppm (E)-2-Hexen-1-yl acetate 2497-18-9 When ready for use, the end-use concentration is not to exceed 100 ppm (Z)-3-Hexenol 928-96-1 When ready for use, the end-use concentration is not to exceed 100 ppm (Z)-3-Hexenol acetate 3681-71-8 When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl benzoate 25152-85-6 When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl butyrate 16491-36-4 When ready for use, the end-use concentration is not to exceed 100 ppm 5-(cis-3-Hexenyl)dihydro-5-methyl-2(3H)furanone 70851-61-5 When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl hexanoate 31501-11-8 When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl isobutyrate 41519-23-7 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Hexenyl 2-methylbutanoate 10094-41-4 When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl propionate 33467-74-2 When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl tiglate 67883-79-8 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Hexenyl formate 9/5/2315 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl acetate 142-92-7 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl benzoate 6789-88-4 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl butyrate 2639-63-6 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl hexanoate 6378-65-0 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl isobutyrate 2349-07-7 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl 2-methylbutanoate 10032-15-2 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl octanoate 1117-55-1 When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl propionate 2445-76-3 When ready for use, the end-use concentration is not to exceed 100 ppm Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 91 ppm Hydroxycitronellal 107-75-5 When ready for use, the end-use concentration is not to exceed 100 ppm Hydroxycitronellal dimethyl acetal 141-92-4 When ready for use, the end-use concentration is not to exceed 100 ppm Hydroxycitronellol 107-74-4 When ready for use, the end-use concentration is not to exceed 100 ppm 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione 123944-63-8 When ready for use, the end-use concentration is not to exceed 300 ppm Hydroxynonanoic acid, δ-lactone 3301-94-8 When ready for use, the end-use concentration is not to exceed 100 ppm 4-(p-hydroxyphenyl)-2-butanone 5471-51-2 When ready for use, the end-use concentration is not to exceed 100 ppm 5-hydroxyundecanoic acid lactone 710-04-3 When ready for use, the end-use concentration is not to exceed 100 ppm Hypochlorous acid 7790-92-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine. Hypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hyssop oil (Hyssopus officinalis L.) 8006-83-5 When ready for use, the end-use concentration is not to exceed 100 ppm 1H-Indole 120-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine α-Ionone 127-41-3 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Ionone 79-76-5 When ready for use, the end-use concentration is not to exceed 100 ppm α-Irone 79-69-6 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl acetate 123-92-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl alcohol 123-51-3 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl benzoate 94-46-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl butyrate 106-27-4 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl cinnamate 7779-65-9 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl isovalerate 659-70-1 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl phenylacetate 102-19-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl propionate 105-68-0 When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl salicylate 87-20-7 When ready for use, the end-use concentration is not to exceed 100 ppm Isoborneol 124-76-5 When ready for use, the end-use concentration is not to exceed 100 ppm Isobornyl acetate 125-12-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl acetate 110-19-0 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl angelate 7779-81-9 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl benzoate 120-50-3 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl 2-butenoate 589-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl butyrate 539-90-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl cinnamate 122-67-8 When ready for use, the end-use concentration is not to exceed 100 ppm. Isobutyl isobutyrate 97-85-8 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Isobutyl-2-methyl-1,3-dioxolane-4-methanol 5660-53-7 Isobutyl phenylacetate 102-13-6 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl salicylate 87-19-4 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyraldehyde 78-84-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyric acid 79-31-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isoeugenol 97-54-1 When ready for use, the end-use concentration is not to exceed 100 ppm Isoeugenyl acetate 93-29-8 When ready for use, the end-use concentration is not to exceed 100 ppm iso-Methyl-β-ionone 79-89-0 When ready for use, the end-use concentration is not to exceed 100 ppm Isopropyl acetate 108-21-4 When ready for use, the end-use concentration is not to exceed 100 ppm p-Isopropylacetophenone 645-13-6 When ready for use, the end-use concentration is not to exceed 100 ppm p-Isopropylbenzyl alcohol 536-60-7 When ready for use, the end-use concentration is not to exceed 100 ppm Isopropyl-3-hydroxybutyrate 54074-94-1 Solvent Isopropyl 2-methylbutyrate 66576-71-4 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Isopropylphenol 88-69-7 When ready for use, the end-use concentration is not to exceed 100 ppm p-Isopropyl phenylacetaldehyde 4395-92-0 When ready for use, the end-use concentration is not to exceed 100 ppm Isopulegol 89-79-2 When ready for use, the end-use concentration is not to exceed 100 ppm Isovaleric acid 503-74-2 When ready for use, the end-use concentration is not to exceed 100 ppm Jasmine lactone 25524-95-2 When ready for use, the end-use concentration is not to exceed 100 ppm Jasmine oil (Jasminum grandiflorum L.) 8022-96-6 When ready for use, the end-use concentration is not to exceed 100 ppm Juniper oil (Juniperus communis L.) 8002-68-4 When ready for use, the end-use concentration is not to exceed 100 ppm Labdanum oil (Cistus spp.) 8016-26-0 When ready for use, the end-use concentration is not to exceed 100 ppm Lactic acid (including l-lactic acid) 50-21-5, 79-33-4 When ready for use, the end-use concentration is not to exceed 10,000 ppm in antimicrobial formulations applied to food-contact surfaces in public eating places laevo-Bornyl acetate 5655-61-8 When ready for use, the end-use concentration is not to exceed 100 ppm Lauryl acetate 112-66-3 When ready for use, the end-use concentration is not to exceed 100 ppm Lauric acid 143-07-7 When ready for use, the end-use concentration is not to exceed 100 ppm Lauric aldehyde 112-54-9 When ready for use, the end-use concentration is not to exceed 100 ppm Lauryl alcohol 112-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm Lavandin oil (Lavandula hybrida) 8022-15-9 When ready for use, the end-use concentration is not to exceed 100 ppm Levulinic acid 123-76-2 When ready for use, the end-use concentration is not to exceed 100 ppm d-Limonene 5989-27-5 When ready for use, the end-use concentration is not to exceed 100 ppm Linalool 78-70-6 When ready for use, the end-use concentration is not to exceed 100 ppm Linalool acetate 115-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl acetate 115-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl benzoate 126-64-7 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl cinnamate 78-37-5 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl formate 115-99-1 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl hexanoate 7779-23-9 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl isobutyrate 78-35-3 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl isovalerate 1118-27-0 When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl propionate 144-39-8 When ready for use, the end-use concentration is not to exceed 100 ppm Linoleic acid, methyl ester 112-63-0 When ready for use, the end-use concentration is not to exceed 100 ppm Lipase, triacylglycerol 9001-62-1 When ready for use, the end-use concentration is not to exceed 500 ppm Lovage oil (Levisticum officinale Koch) 8016-31-7 When ready for use, the end-use concentration is not to exceed 100 ppm Mace oil (Myristica fragrans Houtt.) 8007-12-3 When ready for use, the end-use concentration is not to exceed 100 ppm Magnesium oxide 1309-48-4 None Magnesium sulfate anhydrous 7487-88-9 When ready for use, the end-use concentration is not to exceed 4400 ppm Magnesium sulfate heptahydrate 10034-99-8 When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate hexahydrate 7830-18-1 When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate monohydrate 14168-73-1 When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate pentahydrate 5553-21-6 When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate tetrahydrate 24378-31-2 When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate trihydrate 15320-30-6 When ready for use, the end-use concentration is not to exceed 4400 ppm. p-Mentha-1,8-dien-7-ol 536-59-4 When ready for use, the end-use concentration is not to exceed 100 ppm. p-Mentha-1,8-dien-7-yl acetate 15111-96-3 When ready for use, the end-use concentration is not to exceed 100 ppm. Menthol 15356-70-4; 89-78-1; 1490-04-6 When ready for use, the end-use concentration is not to exceed 100 ppm 4-Mercapto-4-methyl-2-pentanone 19872-52-7 When ready for use, the end-use concentration is not to exceed 100 ppm Methane sulfonic acid 75-75-2 When ready for use, the end use concentration is not to exceed 5,000 ppm 1H-3a,7-Methanoazulen-6-ol, octahydro-3,6,8,8-tetramethyl-,[3R-(3.α,3a.β,6.α,7.β,8aα)] 77-53-2 When ready for use, the end-use concentration is not to exceed 100 ppm. 2-methoxy-4-propylphenol 2785-87-7 When ready for use, the end-use concentration is not to exceed 100 ppm 4-Methoxy-2-methyl-2-butanethiol 94087-83-9 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methoxy-4-methylphenol 93-51-6 When ready for use, the end-use concentration is not to exceed 100 ppm 4-(p-Methoxyphenyl)-2-butanone 104-20-1 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methoxy-4-vinylphenol 7786-61-0 When ready for use, the end-use concentration is not to exceed 100 ppm Methylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm Methyl-α-ionone 127-42-4 When ready for use, the end-use concentration is not to exceed 100 ppm 4′-methylacetophenone 122-00-9 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl anthranilate 134-20-3 When ready for use, the end-use concentration is not to exceed 100 ppm alpha-methylbenzyl alcohol 98-85-1 When ready for use, the end-use concentration is not to exceed 100 ppm methyl benzoate 93-58-3 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methyl-2-butenyl acetate 1191-16-8 When ready for use, the end-use concentration is not to exceed 100 ppm alpha-methylcinnamaldehyde 101-39-3 When ready for use, the end-use concentration is not to exceed 100 ppm methyl cinnamate 103-26-4 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methylcrotonic acid 541-47-9 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 3,7-dimethyl-6-octenoate 2270-60-2 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl heptine carbonate 111-12-6 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl hexanoate 106-70-7 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl linolenate 301-00-8 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 2-methylbutyrate 868-57-5 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-3-(p-isopropylphenyl)propionaldehyde 103-95-7 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl N-acetylanthranilate 2719-08-6 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl anisate 121-98-2 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl N-methylanthranilate 85-91-6 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 2-nonenoate 111-79-5 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 2-nonynoate 111-80-8 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 3-nonenoate 13481-87-3 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-4-phenyl-2-butanol 103-05-9 When ready for use, the end-use concentration is not to exceed 100 ppm p-Methylanisole 104-93-8 When ready for use, the end-use concentration is not to exceed 100 ppm Methylbenzyl acetate (mixed o,m,p) 360676-70-1; 2216-45-7; 17373-93-2 When ready for use, the end-use concentration is not to exceed 100 ppm α-Methylbenzyl propionate 120-45-6 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methyl-2-butenyl benzoate 5205-11-8 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methylindole 83-34-1 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl-α-ionone 127-42-4 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl-β-ionone 127-43-5 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl o-methoxybenzoate 606-45-1 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 3-methylthiopropionate 13532-18-8 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyloctanal 7786-29-0 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl octanoate 111-11-5 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methylpent-2-en-1-oic acid 3142-72-1 When ready for use, the end-use concentration is not to exceed 100 ppm β-Methylphenethyl alcohol 1123-85-9 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl phenylacetate 101-41-7 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-4-phenyl-2-butyl acetate 103-07-1 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl n-propyl ketone 107-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm methyl salicylate 119-36-8 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl sulfide 75-18-3 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl tetradecanoate 124-10-7 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-trans-2-butenoic acid 80-59-1 When ready for use, the end-use concentration is not to exceed 100 ppm Methyl undec-10-enoate 111-81-9 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methylundecanal 110-41-8 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-1,3-propanediol 2163-42-0 None Musk ambrette 123-69-3 When ready for use, the end-use concentration is not to exceed 100 ppm Myristaldehyde 124-25-4 When ready for use, the end-use concentration is not to exceed 100 ppm Myristic acid 544-63-8 When ready for use, the end-use concentration is not to exceed 100 ppm Nerolidiol 142-50-7 When ready for use, the end-use concentration is not to exceed 100 ppm Neroli bigarde oil (Citrus aurantium L.) 8016-38-4 When ready for use, the end-use concentration is not to exceed 100 ppm Nerolidol (isomer unspecified) 7212-44-4 When ready for use, the end-use concentration is not to exceed 100 ppm Neryl acetate 141-12-8 When ready for use, the end-use concentration is not to exceed 100 ppm Neryl formate 2142-94-1 When ready for use, the end-use concentration is not to exceed 100 ppm Nitric acid 7697-37-2 When ready for use, the end-use concentration is not to exceed 1,000 ppm Nona-2-trans-6-cis-dienal 557-48-2 When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Nonadien-1-ol 7786-44-9 When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Nonadienal diethyl acetal 67674-36-6 When ready for use, the end-use concentration is not to exceed 100 ppm 1,3-Nonanediol acetate (mixed esters) 1322-17-4 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Nonalactone 104-61-0 When ready for use, the end-use concentration is not to exceed 100 ppm. Nonanal 124-19-6 When ready for use, the end-use concentration is not to exceed 100 ppm Nonanoic acid 112-05-0 When ready for use, the end-use concentration is not to exceed 100 ppm 6-nonenal, (6Z)- 2277-19-2 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Nonenal 2463-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm. cis-6-nonen-1-ol 35854-86-5 When ready for use, the end-use concentration is not to exceed 100 ppm Nonyl acetate 143-13-5 When ready for use, the end-use concentration is not to exceed 100 ppm Nonyl alcohol 143-08-8 When ready for use, the end-use concentration is not to exceed 100 ppm α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles) None None Octadecanoic acid 57-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm Octadecanoic acid, calcium salt 1592-23-0 None 1-octadecanol 112-92-5 9-Octadecenoic acid (9Z)-, sulfonated, oxidized 1315321-93-7 When ready for use, the end-use concentration is not to exceed 250 ppm 9-Octadecenoic acid (9Z)-, sulfonated, oxidized, potassium salts 1315321-94-8 When ready for use, the end-use concentration is not to exceed 250 ppm 9-Octadecenoic acid (9Z)-, sulfonated, oxidized, sodium salts 1315321-95-9 When ready for use, the end-use concentration is not to exceed 250 ppm 2,6-Octadien-1-ol, 3,7-dimethyl-,(Z)- 106-25-2 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Octalactone 104-50-7 When ready for use, the end-use concentration is not to exceed 100 ppm δ-Octalactone 698-76-0 When ready for use, the end-use concentration is not to exceed 100 ppm Octanal 124-13-0 When ready for use, the end-use concentration is not to exceed 100 ppm octanal dimethyl acetal 10022-28-3 When ready for use, the end-use concentration is not to exceed 100 ppm 1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 46 ppm Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 52 ppm Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 100 ppm 1-Octanol 111-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm 2,5,7-Octatrien-1-ol, 2,6-dimethyl0, 1-acetate 197098-61-6 When ready for use, the end-use concentration is not to exceed 100 ppm 5-Octen-1-ol, (5Z)- 64275-73-6 When ready for use, the end-use concentration is not to exceed 100 ppm 1-Octen-3-yl acetate 2442-10-6 When ready for use, the end-use concentration is not to exceed 100 ppm Oil of Bergamot 8007-75-8 When ready for use, the end-use concentration is not to exceed 100 ppm Oil of camphor 8008-51-3 When ready for use, the end-use concentration is not to exceed 100 ppm Oil of citronella 8000-29-1 When ready for use, the end-use concentration is not to exceed 100 ppm Oil of orange 8008-57-9 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, clove 8000-34-8 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, Fir 8021-29-2 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, geranium 8000-46-2 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, ginger 8007-08-7 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, grapefruit 8016-20-4 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, lavender 8000-28-0 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, lemon, terpene-free 68648-39-5 When ready for use, the end-use concentration is not to exceed 100 ppm Oil of lemon 8008-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm Oil of lemongrass 8007-02-1 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, lime 8008-26-2 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, mimosa 8031-03-6 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, orange, sweet, terpene-free 68606-94-0 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, palmarosa 8014-19-5 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, peppermint 8006-90-4 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, spruce 8008-80-8 When ready for use, the end-use concentration is not to exceed 100 ppm Oils, thyme 8007-46-3 When ready for use, the end-use concentration is not to exceed 100 ppm Oleic acid 112-80-1 When ready for use, the end-use concentration is not to exceed 100 ppm Oleic acid, ethyl ester 111-62-6 When ready for use, the end-use concentration is not to exceed 100 ppm Oleyl alcohol 143-28-2 When ready for use, the end-use concentration is not to exceed 100 ppm Olibanum oil (Boswellia spp.) 8016-36-2 When ready for use, the end-use concentration is not to exceed 100 ppm Orange flower water absolute 8030-28-2 When ready for use, the end-use concentration is not to exceed 100 ppm Orris absolute (Iris pallida) 8002-73-1 When ready for use, the end-use concentration is not to exceed 100 ppm Ortho-benzyl-para-chlorophenol 120-32-1 When ready for use, the end-use concentration is not to exceed 2080 ppm Oxacycloheptadec-10-ene-2-one 28645-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None Palmitic acid 57-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm Paraffin waxes and hydrocarbon waxes; carboxypolymethylene resin; and paraffin waxes and hydrocarbon, oxidized, lithium salts 8002-74-2; 68153-22-0; 68649-48-9 ω-Pentadecalactone 106-02-5 When ready for use, the end-use concentration is not to exceed 100 ppm. 1-pentanol 71-41-0 When ready for use, the end-use concentration is not to exceed 100 ppm Pepper, black, oil (Piper nigrum L.) 8006-82-4 When ready for use, the end-use concentration is not to exceed 100 ppm peppermint (Mentha piperita) ext. 84082-70-2 When ready for use, the end-use concentration is not to exceed 100 ppm Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 58 ppm Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 52 ppm Petitgrain bigarade oil 8014-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm Petitgrain Paraguay oil 8014-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm α-Phellandrene 99-83-2 When ready for use, the end-use concentration is not to exceed 100 ppm phenethyl acetate 103-45-7 When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl butyrate 103-52-6 When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl cinnamate 103-53-7 When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl formate 104-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl hexanoate 6290-37-5 When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl propionate 122-70-3 When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl salicylate 87-22-9 When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl tiglate 55719-85-2 When ready for use, the end-use concentration is not to exceed 100 ppm Phenol, 2-methoxy-4-(2-propenyl)- 97-53-0 When ready for use, the end-use concentration is not to exceed 100 ppm Phenol, 2,4,6-trimethyl- 527-60-6 When ready for use, the end-use concentration is not to exceed 100 ppm phenyl ethyl alcohol 60-12-8 When ready for use, the end-use concentration is not to exceed 100 ppm phenethyl isobutyrate 103-48-0 When ready for use, the end-use concentration is not to exceed 100 ppm phenethyl phenylacetate 102-20-5 When ready for use, the end-use concentration is not to exceed 100 ppm phenylacetaldehyde dimethyl acetal 101-48-4 When ready for use, the end-use concentration is not to exceed 100 ppm Phenylacetaldehyde glyceryl acetal 29895-73-6 When ready for use, the end-use concentration is not to exceed 100 ppm Phenylacetic acid 103-82-2 When ready for use, the end-use concentration is not to exceed 100 ppm 2-phenylethyl 2-methylbutyrate 24817-51-4 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropionaldehyde 104-53-0 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropionic acid 501-52-0 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropyl acetate 122-72-5 When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropyl cinnamate 122-68-9 When ready for use, the end-use concentration is not to exceed 100 ppm 3-phenyl-1-propanol 122-97-4 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Phenylpropionaldehyde 93-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm 2-Phenylpropionaldehyde dimethyl acetal 90-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 14 ppm Phosphoric acid 7664-38-2 Phosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm Pine needle oil 8000-26-8 When ready for use, the end-use concentration is not to exceed 100 ppm Pine scotch oil (Pinus sylvestris L.) 8023-99-2 When ready for use, the end-use concentration is not to exceed 100 ppm α-Pinene 80-56-8 When ready for use, the end-use concentration is not to exceed 100 ppm Polyammonium bisulfate 10043-02-4 When ready for use, the end-use concentration is not to exceed 250 ppm Potassium 2-benzyl-4-chlorophenate 35471-49-9 When ready for use, the end-use concentration is not to exceed 2080 ppm Potassium bromide 7758-02-3 When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine 1,3-Propanediol 504-63-2 None propanoic acid, 2-methyl-, 4-formyl-2-methoxyphenyl ester 20665-85-4 When ready for use, the end-use concentration is not to exceed 100 ppm Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 100 ppm Propenylguaethol 94-86-0 When ready for use, the end-use concentration is not to exceed 100 ppm Propionic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 100 ppm Propyl phenethyl acetal 7493-57-4 When ready for use, the end-use concentration is not to exceed 100 ppm Propylene glycol 57-55-6 None α-Propylphenethyl alcohol 705-73-7 When ready for use, the end-use concentration is not to exceed 100 ppm o-Propylphenol 644-35-9 When ready for use, the end-use concentration is not to exceed 100 ppm p-Propylphenol 645-56-7 When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Pyridinedicarboxylic acid 499-83-2 When ready for use, the end-use concentration is not to exceed 2 ppm Pyruvic acid 127-17-3 When ready for use, the end-use concentration is not to exceed 100 ppm Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound Quaternary ammonium compounds: n-alkyl (C12-18) dimethyl benzyl ammonium chloride 68424-85-1 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound Quaternary Ammonium Compounds: n-alkyl (C 12-14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 85409-23-0 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound. Quaternary ammonium compounds n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound Quaternary ammonium compounds, Di-n-Alkyl (C8-10) dimethyl ammonium chloride, average molecular weight (in amu) 332 to 361 None When ready for use, the end-use concentration of these specific in quaternary ammonium compounds is not to exceed 240 ppm of active quaternary ammonium compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 400 ppm of active quaternary compound Quaternary ammonium compounds, didecyl dimethyl ammonium carbonate/didecyl dimethyl ammonium bicarbonate 148788-55-0/148812-654-1 When ready for use, the end-use concentration of these specific ammonium compounds is not to exceed 400 ppm of active quaternary ammonium compound Rose absolute (Rosa spp.) 8007-01-0 When ready for use, the end-use concentration is not to exceed 100 ppm Salicylaldehyde 90-02-8 When ready for use, the end-use concentration is not to exceed 100 ppm Sandalwood yellow oil (Santalum album L.) 8006-87-9 When ready for use, the end-use concentration is not to exceed 100 ppm Santalol 11031-45-1 When ready for use, the end-use concentration is not to exceed 100 ppm cis-α-Santalol 115-71-9 When ready for use, the end-use concentration is not to exceed 100 ppm cis-β-Santalol 77-42-9 When ready for use, the end-use concentration is not to exceed 100 ppm Schinus molle oil (Schinus molle L.) 68917-52-2 When ready for use, the end-use concentration is not to exceed 100 ppm Sclareol 515-03-7 When ready for use, the end-use concentration is not to exceed 100 ppm Silver ions resulting from the use of electrolytically-generated silver ions stabilized in citric acid as silver dihydrogen citrate (does not include metallic silver) 14701-21-4 When ready for use, the end-use concentration of silver ions is not to exceed 50 ppm of active silver Sodium 2-benzyl-4-chlorophenate 3184-65-4 When ready for use, the end-use concentration is not to exceed 2080 ppm Sodium bisulfate 7681-38-1 When ready for use, the end-use concentration is not to exceed 2,000 ppm Sodium dioctyl sulfosuccinate 577-11-7 None Sodium lauroyl sarcosinate 137-16-6 When ready for use, the end-use concentration is not to exceed 10,000 ppm Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)- 9005-65-6 None Spike lavender oil (Lavandula spp.) 8016-78-2 When ready for use, the end-use concentration is not to exceed 100 ppm Stearic acid. 57-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm Storax (Liquidambar spp.) 8046-19-3 When ready for use, the end-use concentration is not to exceed 100 ppm Sulfuric acid 7664-93-9 Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils in antimicrobial formulations. Not to exceed 600 ppm Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm Tagetes oil (Tagetes erecta L.) 8016-84-0 When ready for use, the end-use concentration is not to exceed 100 ppm Tall oil fatty acid (CAS Reg. No. 61790-12-3) Solvent/carrier Tangerine oil (Citrus reticulata blanco) 8008-31-9 When ready for use, the end-use concentration is not to exceed 100 ppm Tartaric acid 87-69-4 When ready for use, the end-use concentration is not to exceed 100 ppm DL-Tartaric acid 133-37-9 When ready for use, the end-use concentration is not to exceed 100 ppm α-Terpinene 99-86-5 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Terpinene 99-85-4 When ready for use, the end-use concentration is not to exceed 100 ppm α-Terpineol 98-55-5 When ready for use, the end-use concentration is not to exceed 100 ppm Terpinyl acetate (isomer mixture) 8007-35-0 When ready for use, the end-use concentration is not to exceed 100 ppm 1-tetradecanol 112-72-1 α-Terpinyl propionate 80-27-3 When ready for use, the end-use concentration is not to exceed 100 ppm. Tetraacetylethylenediamine (TAED) 10543-57-4 None Tetradecanoic acid, ethyl ester 124-06-1 When ready for use, the end-use concentration is not to exceed 100 ppm. Tetradecanoic acid, 1-methylethyl ester 110-27-0 When ready for use, the end-use concentration is not to exceed 100 ppm Tetrahydrogeranial 5988-91-0 When ready for use, the end-use concentration is not to exceed 100 ppm. Tetrahydrolinalool 78-69-3 When ready for use, the end-use concentration is not to exceed 100 ppm. Thiogeraniol 39067-80-6 When ready for use, the end-use concentration is not to exceed 100 ppm thymol (8CA) 89-83-8 When ready for use, the end-use concentration is not to exceed 100 ppm Thyme (Thymus Vulgaris) Oil 84929-51-1 When ready for use, the end-use concentration is not to exceed 100 ppm Tolu, balsam, gum (Myroxylon spp.) 9000-64-0 When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolylacetaldehyde 104-09-6 When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl acetate 140-39-6 When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl isobutyrate 103-93-5 When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl 3-methylbutyrate 55066-56-3 When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl octanoate 59558-23-5 When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl phenylacetate 101-94-0 When ready for use, the end-use concentration is not to exceed 100 ppm 2-(p-Tolyl)propionaldehyde 99-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm Trans-1,3,3,3-tetrafluoroprop-1-ene 29118-24-9 None 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 2-Tridecanal 7774-82-5 When ready for use, the end-use concentration is not to exceed 100 ppm triethyl citrate 77-93-0 When ready for use, the end-use concentration is not to exceed 100 ppm Triethylene glycol 112-27-6 None p-α,α-Trimethylbenzyl alcohol 1197-01-9 When ready for use, the end-use concentration is not to exceed 100 ppm 2,6,6-Trimethyl-1-cyclohexen-1-acetaldehyde 472-66-2 When ready for use, the end-use concentration is not to exceed 100 ppm 2,6,6-Trimethyl-1&2-cyclohexen-1-carboxaldehyde 432-25-7 When ready for use, the end-use concentration is not to exceed 100 ppm 1,3,3-trimethyl-2-norbornanyl acetate 13851-11-1 When ready for use, the end-use concentration is not to exceed 100 ppm 3,3,5-Trimethylcyclohexanol 116-02-9 When ready for use, the end-use concentration is not to exceed 100 ppm (Z)-β-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one; (2E)-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one 35044-68-9; 23726-92-3; 23726-91-2 When ready for use, the end-use concentration is not to exceed 100 ppm 2,3,6-Trimethylphenol 2416-94-6 When ready for use, the end-use concentration is not to exceed 100 ppm 4,7,7-Trimethyl-6-thiabicyclo[3.2.1]octane 68398-18-5 When ready for use, the end-use concentration is not to exceed 100 ppm . delta-1-(2,6,6-trimethyl-3-cyclohexen-1-yl)-2-buten-1-one 57378-68-4 When ready for use, the end-use concentration is not to exceed 100 ppm 3,5,5-Trimethylhexanal 5435-64-3 When ready for use, the end-use concentration is not to exceed 100 ppm Turpentine, oil 8006-64-2 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Undecalactone 104-67-6 When ready for use, the end-use concentration is not to exceed 100 ppm. Undecanal 112-44-7 When ready for use, the end-use concentration is not to exceed 100 ppm 1-undecanol 112-42-5 Carrier/Adjuvant and Coating Agent/Binder. 1,3,5-Undecatriene 16356-11-9 When ready for use, the end-use concentration is not to exceed 100 ppm 9-Undecenal 143-14-6 When ready for use, the end-use concentration is not to exceed 100 ppm 10-Undecenal 112-45-8 When ready for use, the end-use concentration is not to exceed 100 ppm 10-Undecenoic acid 112-38-9 When ready for use, the end-use concentration is not to exceed 100 ppm 10-Undecenoic acid, ethyl ester 692-86-4 When ready for use, the end-use concentration is not to exceed 100 ppm 10-undecen-1-yl acetate 112-19-6 When ready for use, the end-use concentration is not to exceed 100 ppm. Undecyl alcohol 112-42-5 When ready for use, the end-use concentration is not to exceed 100 ppm Valencene 4630-07-3 When ready for use, the end-use concentration is not to exceed 100 ppm Valeraldehyde 110-62-3 When ready for use, the end-use concentration is not to exceed 100 ppm Valeric acid 109-52-4 When ready for use, the end-use concentration is not to exceed 100 ppm γ-Valerolactone 108-29-2 When ready for use, the end-use concentration is not to exceed 100 ppm Vanilla (Vanilla spp.) 8024-06-4 When ready for use, the end-use concentration is not to exceed 100 ppm Vanilla extract (Vanilla spp.) 84650-63-5 When ready for use, the end-use concentration is not to exceed 100 ppm Vanilla tahitensis, ext. 94167-14-3 When ready for use, the end-use concentration is not to exceed 100 ppm Vanillin 121-33-5 When ready for use, the end-use concentration is not to exceed 100 ppm veratraldehyde 120-14-9 When ready for use, the end-use concentration is not to exceed 100 ppm Violet leaves absolute (Viola odorata L.) 90147-36-7 When ready for use, the end-use concentration is not to exceed 100 ppm Waxes and waxy substances, rice bran, oxidized 1883583-80-9 None Wintergreen oil 68917-75-9 When ready for use, the end-use concentration is not to exceed 100 ppm Xylenesulfonic acid, sodium salt 1300-72-7 When ready for use, the end-use concentration is not to exceed 500 ppm 2,5-Xylenol 95-87-4 When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Xylenol 576-26-1 When ready for use, the end-use concentration is not to exceed 100 ppm 3,4-Xylenol 95-65-8 When ready for use, the end-use concentration is not to exceed 100 ppm Ylang-ylang oils 8006-81-3 When ready for use, the end-use concentration is not to exceed 100 ppm Zingerone 122-48-5 When ready for use, the end-use concentration is not to exceed 100 ppm (b) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Dairy processing equipment, and food-processing equipment and utensils.
Pesticide Chemical CAS Reg. No. Limits Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1200 ppm Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid Butanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None Calcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm Decanoic acid 334-48-5 When ready for use, the end-use concentration is not to exceed 90 ppm Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm Ethylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 1,000 ppm. D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None D-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm Hydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals is not to exceed 25 ppm of titratable iodine Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 465 ppm Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Lactic acid 50-21-5 When ready for use, the end-use concentration is not to exceed 138 ppm Nonanoic acid 112-05-0 When ready for use, the end-use concentration is not to exceed 90 ppm 1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm 1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm 1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm 1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 297 ppm 1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 176 ppm Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide) Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm Phosphoric acid 7664-38-2 None Phosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm (c) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-processing equipment and utensils.
Pesticide Chemical CAS Reg. No. Limits Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1,200 ppm Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid Ammonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm [1,1′-Biphenyl]-2-ol 90-43-7 When ready for use, the end-use concentration is not to exceed 400 ppm Boric acid, sodium salt 7775-19-1 None Butanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm Butanedioic acid, sulfo-, 1,4-dioctyl ester, sodium salt 1639-66-3 None Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, cloudpoint of 90 - 100o C in 0.5 aqueous solution, average molecular weight (in amu), 3300 None None Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None Calcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm 3-Cyclohexene-1-methanol,α,α,4-trimethyl- 98-55-5 None 1-Decanaminium, N-decyl-N, N-dimethyl-, chloride 7173-51-5 When ready for use, the end-use concentration is not to exceed 200 ppm of active quaternary compound Decanoic acid 3347-48-5 When ready for use, the end-use concentration is not to exceed 234 ppm Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm Ethanol 64-17-5 None Ethanol, 2 butoxy- 111-76-2 None Ethanol, 2-(2-ethoxyethoxy)- 111-90-0 None Ethylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None Fatty acids, coco, potassium salts 61789-30-8 None Fatty acids, tall-oil, sulfonated, sodium salts 68309-27-3 When ready for use, the end-use concentration is not to exceed 66 ppm FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None D-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm Hydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 1100 ppm Hypochlorous acid, calcium salt 7778-54-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hypochlorous acid, lithium salt 13840-33-0 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine and 30 ppm lithium Hypochlorous acid, potassium salt 7778-66-7 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Magnesium oxide 1309-48-4 None Methylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm Neodecanoic acid 26896-20-8 When ready for use, the end-use concentration is not to exceed 174 ppm Nonanoic acid 112-05-0 When ready for use, the end-use concentration is not to exceed 90 ppm α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) maximum average molecular weight (in amu), 748 None None α-(p-Nonylphenol)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles None None α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole p-nonylphenol with 9 to 12 moles ethylene oxide None None α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene), 9 to 13 moles ethylene oxide None None Octadecanoic acid, calcium salt 1592-23-0 None 9-Octadecenoic acid (9Z)-, sulfonated 68988-76-1 When ready for use, the end-use concentration is not to exceed 312 ppm 9-Octadecenoic acid (9Z)-sulfonated, sodium salts 68443-05-0 When ready for use, the end-use concentration is not to exceed 200 ppm 1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm 1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm 1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm 1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 312 ppm 1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 234 ppm Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None Oxirane, methyl-, polymer with oxirane, block, average molecular weight (in amu), 1900 106392-12-5 None Oxirane, methyl-, polymer with oxirane, block, minimum average molecular weight (in amu), 2000 None None Oxirane, methyl-, polymer with oxirane, block, 27 to 31 moles of polyoxypropylene, average molecular weight (in amu) 2000 None None Oxychloro species (predominantly chlorite, chlorate and chlorine dioxide in an equilibrium mixture) generated either (i) by directly metering a concentrated chlorine dioxide solution prepared just prior to use, into potable water, or (ii) by acidification of an aqueous alkaline solution of oxychloro species (predominately chlorite and chlorate) followed by dilution with potable water None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)” Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)” 2,4-Pentanediol, 2-methyl- 107-41-5 None Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm Phenol, 4-(1,1-dimethylpropyl)- 80-46-6 When ready for use, the end-use concentration is not to exceed 80 ppm Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm Phosphoric acid 7664-38-2 None Phosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm Phosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm Poly(oxy-1,2-ethanediyl), α-[(1,1,3,3-tetramethylbutyl) phenyl]-ω-hydroxy-, produced with one mole of the phenol and 4 to 14 moles ethylene oxide None None Potassium bromide 7758-02-3 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium compounds, n-alkyl (C12-C14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium compounds, n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium compounds, di-n-Alkyl (C8-C10) dimethyl ammonium chloride, average molecular weight (in amu), 332 to 361 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 240 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Sodium-α-alkyl(C12-C15)-ω-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one mole None None Sodium bromide 7647-15-6 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen Sodium iodide 7681-82-5 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 None 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro- 2782-57-2 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, potassium salt 2244-21-5 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When r use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-trichloro- 87-90-1 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine, N,N′,N″-trichloro-2,4,6-triamino- 7673-09-8 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine [69 FR 23136, Apr. 28, 2004]