§ 1304.22 - Records for manufacturers, distributors, dispensers, researchers, importers, exporters, registrants that reverse distribute, and collectors.

§ 1304.22 Records for manufacturers, distributors, dispensers, researchers, importers, exporters, registrants that reverse distribute, and collectors.

Each person registered or authorized (by §§ 1301.13(e), 1307.11, 1307.13, or part 1317 of this chapter) to manufacture, distribute, dispense, import, export, reverse distribute, destroy, conduct research with controlled substances, or collect controlled substances from ultimate users, shall maintain records with the information listed in paragraphs (a) through (f) of this section.

(a) Records for manufacturers. Each person registered or authorized to manufacture controlled substances shall maintain records with the following information:

(1) For each controlled substance in bulk form to be used in, or capable of use in, or being used in, the manufacture of the same or other controlled or noncontrolled substances in finished form,

(i) The name of the substance;

(ii) The quantity manufactured in bulk form by the registrant, including the date, quantity and batch or other identifying number of each batch manufactured;

(iii) The quantity received from other persons, including the date and quantity of each receipt and the name, address, and registration number of the other person from whom the substance was received;

(iv) The quantity imported directly by the registrant (under a registration as an importer) for use in manufacture by him/her, including the date, quantity, and import permit or declaration number for each importation;

(v) The quantity used to manufacture the same substance in finished form, including:

(A) The date and batch or other identifying number of each manufacture;

(B) The quantity used in the manufacture;

(C) The finished form (e.g., 10-milligram tablets or 10-milligram concentration per fluid ounce or milliliter);

(D) The number of units of finished form manufactured;

(E) The quantity used in quality control;

(F) The quantity lost during manufacturing and the causes therefore, if known;

(G) The total quantity of the substance contained in the finished form;

(H) The theoretical and actual yields; and

(I) Such other information as is necessary to account for all controlled substances used in the manufacturing process;

(vi) The quantity used to manufacture other controlled and noncontrolled substances, including the name of each substance manufactured and the information required in paragraph (a)(1)(v) of this section;

(vii) The quantity distributed in bulk form to other persons, including the date and quantity of each distribution and the name, address, and registration number of each person to whom a distribution was made;

(viii) The quantity exported directly by the registrant (under a registration as an exporter), including the date, quantity, and export permit or declaration number of each exportation;

(ix) The quantity distributed or disposed of in any other manner by the registrant (e.g., by distribution of complimentary samples or by destruction), including the date and manner of distribution or disposal, the name, address, and registration number of the person to whom distributed, and the quantity distributed or disposed; and

(x) The originals of all written certifications of available procurement quotas submitted by other persons (as required by § 1303.12(f) of this chapter) relating to each order requiring the distribution of a basic class of controlled substance listed in Schedule I or II.

(2) For each controlled substance in finished form,

(i) The name of the substance;

(ii) Each finished form (e.g., 10-milligram tablet or 10-milligram concentration per fluid ounce or milliliter) and the number of units or volume of finished form in each commercial container (e.g., 100-tablet bottle or 3-milliliter vial);

(iii) The number of containers of each such commercial finished form manufactured from bulk form by the registrant, including the information required pursuant to paragraph (a)(1)(v) of this section;

(iv) The number of units of finished forms and/or commercial containers acquired from other persons, including the date of and number of units and/or commercial containers in each acquisition to inventory and the name, address, and registration number of the person from whom the units were acquired;

(v) The number of units of finished forms and/or commercial containers imported directly by the person (under a registration or authorization to import), including the date of, the number of units and/or commercial containers in, and the import permit or declaration number for, each importation;

(vi) The number of units and/or commercial containers manufactured by the registrant from units in finished form received from others or imported, including:

(A) The date and batch or other identifying number of each manufacture;

(B) The operation performed (e.g., repackaging or relabeling);

(C) The number of units of finished form used in the manufacture, the number manufactured and the number lost during manufacture, with the causes for such losses, if known; and

(D) Such other information as is necessary to account for all controlled substances used in the manufacturing process;

(vii) The number of commercial containers distributed to other persons, including the date of and number of containers in each reduction from inventory, and the name, address, and registration number of the person to whom the containers were distributed;

(viii) The number of commercial containers exported directly by the registrant (under a registration as an exporter), including the date, number of containers and export permit or declaration number for each exportation; and

(ix) The number of units of finished forms and/or commercial containers distributed or disposed of in any other manner by the registrant (e.g., by distribution of complimentary samples or by destruction), including the date and manner of distribution or disposal, the name, address, and registration number of the person to whom distributed, and the quantity in finished form distributed or disposed.

(b) Records for distributors. Except as provided in paragraph (e) of this section, each person registered or authorized to distribute controlled substances shall maintain records with the same information required of manufacturers pursuant to paragraphs (a)(2)(i), (ii), (iv), (v), (vii), (viii) and (ix) of this section.

(c) Records for dispensers and researchers. Each person registered or authorized to dispense or conduct research with controlled substances shall maintain records with the same information required of manufacturers pursuant to paragraph (a)(2)(i), (ii), (iv), (vii), and (ix) of this section. In addition, records shall be maintained of the number of units or volume of such finished form dispensed, including the name and address of the person to whom it was dispensed, the date of dispensing, the number of units or volume dispensed, and the written or typewritten name or initials of the individual who dispensed or administered the substance on behalf of the dispenser. In addition to the requirements of this paragraph, practitioners dispensing gamma-hydroxybutyric acid under a prescription must also comply with § 1304.26.

(d) Records for importers and exporters. Each person registered or authorized to import or export controlled substances shall maintain records with the same information required of manufacturers pursuant to paragraphs (a)(2) (i), (iv), (v) and (vii) of this section. In addition, the quantity disposed of in any other manner by the registrant (except quantities used in manufacturing by an importer under a registration as a manufacturer), which quantities are to be recorded pursuant to paragraphs (a)(1) (iv) and (v) of this section; and the quantity (or number of units or volume in finished form) exported, including the date, quantity (or number of units or volume), and the export permit or declaration number for each exportation, but excluding all quantities (and number of units and volumes) manufactured by an exporter under a registration as a manufacturer, which quantities (and numbers of units and volumes) are to be recorded pursuant to paragraphs (a)(1)(xiii) or (a)(2)(xiii) of this section.

(e) Records for registrants that reverse distribute. Each person registered or authorized to reverse distribute controlled substances shall maintain records with the following information for each controlled substance:

(1) For controlled substances acquired for the purpose of return or recall to the manufacturer or another registrant authorized by the manufacturer to accept returns on the manufacturer's behalf pursuant to part 1317 of this chapter:

(i) The date of receipt; the name and quantity of each controlled substance received; the name, address, and registration number of the person from whom the substance was received; and the reason for return (e.g., recall or return); and

(ii) The date of return to the manufacturer or other registrant authorized by the manufacturer to accept returns on the manufacturer's behalf; the name and quantity of each controlled substance returned; the name, address, and registration number of the person from whom the substance was received; the name, address, and registration number of the registrant to whom the substance was returned; and the method of return (e.g., common or contract carrier).

(2) For controlled substances acquired from registrant inventory for destruction pursuant to § 1317.05(a)(2), (b)(2), and (b)(4) of this chapter:

(i) The date of receipt; the name and quantity of each controlled substance received; and the name, address, and registration number of the person from whom the substance was received; and

(ii) The date, place, and method of destruction; the name and quantity of each controlled substance destroyed; the name, address, and registration number of the person from whom the substance was received; and the name and signatures of the two employees of the registrant that witnessed the destruction.

(3) The total quantity of each controlled substance shall be recorded in accordance with the following:

(i) For controlled substances in bulk form: To the nearest metric unit weight or volume consistent with unit size;

(ii) For controlled substances in finished form: Each finished form (e.g., 10-milligram tablet or 10-milligram concentration per fluid ounce or milliliter); the number of units or volume of finished form in each commercial container (e.g., 100-tablet bottle or 3-milliliter vial); and the number of commercial containers of each such finished form (e.g., four 100-tablet bottles or six 3-milliliter vials); and

(iii) For controlled substances in a commercial container, carton, crate, drum, or other receptacle that has been opened: If the substance is listed in Schedule I or II make an exact count or measure of the contents; or if the substance is listed in Schedule III, IV, or V, make an estimated count or measure of the contents, unless the container holds more than 1,000 tablets or capsules in which case an exact count of the contents shall be made.

(4) For each sealed inner liner acquired from collectors or law enforcement and each sealed mail-back package acquired from law enforcement pursuant to § 1317.55 of this chapter:

(i) The number of sealed inner liners acquired from other persons, including the date of acquisition, the number and, for sealed inner liners the size (e.g., five 10-gallon liners, etc.), of all sealed inner liners and mail-back packages acquired to inventory, the unique identification number of each sealed inner liner and mail-back package, and the name, address, and, for registrants, the registration number of the person from whom the sealed inner liners and mail-back packages were received, and

(ii) The date, place, and method of destruction; the number of sealed inner liners and mail-back packages destroyed; the name, address, and, for registrants, the registration number of the person from whom the sealed inner liners and mail-back packages were received; the number and, for sealed inner liners the size (e.g., five 10-gallon liners, etc.), of all sealed inner liners and mail-back packages destroyed; the unique identification number of each sealed inner liner and sealed mail-back package destroyed; and the name and signatures of the two employees of the registrant that witnessed the destruction.

(5) For all records, the record of receipt shall be maintained together with the corresponding record of return or destruction (DEA Form 41).

(f) Records for collectors. Each person registered or authorized to collect controlled substances from ultimate users shall maintain the following records:

(1) Mail-Back Packages:

(i) For unused packages that the collector makes available to ultimate users and other authorized non-registrants at the collector's registered address: The date made available, the number of packages, and the unique identification number of each package;

(ii) For unused packages provided to a third party to make available to ultimate users and other authorized non-registrants: The name of the third party and physical address of the location receiving the unused packages, date sent, and the number of unused packages sent with the corresponding unique identification numbers;

(iii) For sealed mail-back packages received by the collector: Date of receipt and the unique identification number on the individual package; and

(iv) For sealed mail-back packages destroyed on-site by the collector: Number of sealed mail-back packages destroyed, the date and method of destruction, the unique identification number of each mail-back package destroyed, and the names and signatures of the two employees of the registrant who witnessed the destruction.

(2) Collection receptacle inner liners:

(i) Date each unused inner liner acquired, unique identification number and size (e.g., 5-gallon, 10-gallon, etc.) of each unused inner liner acquired;

(ii) Date each inner liner is installed, the address of the location where each inner liner is installed, the unique identification number and size (e.g., 5-gallon, 10-gallon, etc.) of each installed inner liner, the registration number of the collector, and the names and signatures of the two employees that witnessed each installation;

(iii) Date each inner liner is removed and sealed, the address of the location from which each inner liner is removed, the unique identification number and size (e.g., 5-gallon, 10-gallon, etc.) of each inner liner removed, the registration number of the collector, and the names and signatures of the two employees that witnessed each removal;

(iv) Date each sealed inner liner is transferred to storage, the unique identification number and size (e.g., 5-gallon, 10-gallon, etc.) of each sealed inner liner stored, and the names and signatures of the two employees that transferred each sealed inner liner to storage;

(v) Date each sealed inner liner is transferred for destruction, the address and registration number of the reverse distributor or distributor to whom each sealed inner liner was transferred, the unique identification number and the size (e.g., 5-gallon, 10-gallon, etc.) of each sealed inner liner transferred, and the names and signatures of the two employees that transferred each sealed inner liner to the reverse distributor or distributor; and

(vi) For sealed inner liners destroyed on-site by the collector: The same information required of reverse distributors in paragraph (e)(4)(ii) of this section.

[62 FR 13960, Mar. 24, 1997, as amended at 68 FR 41229, July 11, 2003; 70 FR 293, Jan. 4, 2005; 79 FR 53564, Sept. 9, 2014]