Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 30 - Mineral Resources |
Chapter V - Bureau of Ocean Energy Management, Department of the Interior |
SubChapter B - Offshore |
Part 550 - Oil and Gas and Sulphur Operations in the Outer Continental Shelf |
Subpart B - Plans and Information |
Contents of Development and Production Plans (DPP) and Development Operations Coordination Documents (DOCD) |
§ 550.241 - What must the DPP or DOCD include?
-
§ 550.241 What must the DPP or DOCD include?
Your DPP or DOCD must include the following:
(a) Description, objectives, and schedule. A description, discussion of the objectives, and tentative schedule (from start to completion) of the development and production activities you propose to undertake. Examples of development and production activities include:
(1) Development drilling;
(2) Well test flaring;
(3) Installation of production platforms, satellite structures, subsea wellheads and manifolds, and lease term pipelines (see definition at § 550.105); and
(4) Installation of production facilities and conduct of production operations.
(b) Location. The location and water depth of each of your proposed wells and production facilities. Include a map showing the surface and bottom-hole location and water depth of each proposed well, the surface location of each production facility, and the locations of all associated drilling unit and construction barge anchors.
(c) Drilling unit. A description of the drilling unit and associated equipment you will use to conduct your proposed development drilling activities. Include a brief description of its important safety and pollution prevention features, and a table indicating the type and the estimated maximum quantity of fuels and oil that will be stored on the facility (see definition of “facility (3)” under § 550.105).
(d) Production facilities. A description of the production platforms, satellite structures, subsea wellheads and manifolds, lease term pipelines (see definition at § 550.105), production facilities, umbilicals, and other facilities you will use to conduct your proposed development and production activities. Include a brief description of their important safety and pollution prevention features, and a table indicating the type and the estimated maximum quantity of fuels and oil that will be stored on the facility (see definition of “facility (3)” under § 550.105).
(e) Service fee. You must include payment of the service fee listed in § 550.125.