§ 777.14 - Maps and plans: General requirements.

§ 777.14 What general requirements apply to maps Maps and plans?: General requirements.

(a)

(1)

Maps submitted with applications

must

shall be presented in a consolidated format, to the extent possible, and

must

shall include all the types of information that are set forth on topographic maps of the U.S. Geological Survey of the 1:24,000 scale series.

(2)

Maps of the

proposed

permit area

must

shall be at a scale of 1:6,000 or larger.

(3)

Maps of the adjacent area

must

shall clearly show the lands and waters within

that area

those areas and

must

be

at

in a scale determined by the regulatory authority, but in no event smaller than 1:24,000.

(b) When applicable, maps must clearly show All maps and plans submitted with the application shall distinguish among each of the phases during which surface coal mining operations were or will be conducted at any place within the life of operations. At a minimum, distinctions shall be clearly shown among those portions of the operation where life of operations in which surface coal mining operations occurred -

(1) Prior to August 3, 1977. ;

(2) After August 3, 1977, but and prior to either -

(i) May 3, 1978; or

(ii) January 1, 1979, if In the case of an applicant or operator which obtained a small operator's exemption in accordance with § 710.12 of this chapter. , January 1, 1979;

(3) After May 3, 1978 (or January 1, 1979, for persons who received a small operator's exemption in accordance with § 710.12 of this chapter) and prior to the approval of the applicable regulatory program;

(4) After the estimated date of issuance of a permit by the regulatory authority under the approved regulatory program.

[48 FR 44398, as amended at 81 FR 93327, Dec. 20, 2016; 82 FR 54947, Nov. 17, 2017]