Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
Subpart SSSS - National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Coil |
Emission Standards and Compliance Dates |
§ 63.5130 - When must I comply?
-
§ 63.5130 When must I comply?
(a) For an existing affected source, the compliance date is 3 years after June 10, 20022005.
(b) If you own or operate a new affected source subject to the provisions of this subpart, you must comply immediately upon start-up of the affected source, or by June 10, 2002, whichever is later.
(c) Affected sources which have undergone reconstruction are subject to the requirements for new affected sources.
(d) The initial compliance period begins on the applicable compliance date specified in paragraph (a) or (b) of this section and ends on the last day of the 12th month following the compliance date. If the compliance date falls on any day other than the first day of a month, then the initial compliance period extends through that month plus the next 12 months.
(e) For the purpose of demonstrating continuous compliance, a compliance period consists of 12 months. Each month after the end of the initial compliance period described in paragraph (d) of this section is the end of a compliance period consisting of that month and the preceding 11 months.
[67 FR 39812, June 10, 2002, as amended at 85 FR 10862, Feb. 25, 2020]