§ 751.407 - PIP (3:1).  


Latest version.
  • § 751.407 PIP (3:1).

    (a) Prohibitions -

    (1) General. Except as provided in paragraphs (a)(2) and (b) of this section, all persons are prohibited from all processing and distributing in commerce of PIP (3:1), including in PIP (3:1)-containing products or articles after March 8, 2021.

    (2) Phase-in Prohibitions for Specific uses of PIP (3:1) and PIP (3:1)-containing products and articles.

    (i) After January 6, 2025, all persons are prohibited from all processing and distributing in commerce of PIP (3:1) for use in adhesives and sealants, PIP (3:1)-containing products for use in adhesives and sealants, and PIP (3:1)-containing adhesives and sealants.

    (ii) After January 1, 2022, all persons are prohibited from all processing and distributing in commerce of PIP (3:1) for use in photographic printing articles and PIP (3:1)-containing photographic printing articles.

    (iii) After March 8October 31, 20222024, except as provided in paragraphs (a)(2)(ii) and (b) of this section, all persons are prohibited from all processing and distribution in commerce of PIP (3:1) for use in articles and PIP (3:1)-containing articles.

    (b) Exclusions. The following activities are not subject to the prohibitions in paragraph (a) of this section.

    (1) Processing and distribution in commerce of:

    (i) PIP (3:1) for use in hydraulic fluids either for the aviation industry or to meet military specifications for safety and performance where no alternative chemical is available that meets U.S. Department of Defense specification requirements, PIP (3:1)-containing products for use in such hydraulic fluids, and PIP (3:1)-containing hydraulic fluids either for the aviation industry or to meet military specifications for safety and performance where no alternative chemical is available that meets U.S. Department of Defense specification requirements.

    (ii) PIP (3:1) for use in lubricants and greases, PIP (3:1) containing products for use in lubricants and greases, and PIP (3:1)-containing lubricants and greases.

    (iii) PIP (3:1) and PIP (3:1)-containing products for use in new and replacement parts for motor and aerospace vehicles, the new and replacement parts to which PIP (3:1) has been added for such vehicles, and the motor and aerospace vehicles that contain new and replacement parts to which PIP (3:1) has been added;

    (iv) PIP (3:1) and PIP (3:1)-containing products for use as an intermediate in a closed system to produce cyanoacrylate adhesives;

    (v) PIP (3:1) for use in specialized engine air filters for locomotive and marine applications, PIP (3:1) containing products for use in specialized engine air filters for locomotive and marine applications, and PIP (3:1)-containing specialized engine air filters for locomotive and marine applications;

    (vi) Plastic for recycling from products or articles containing PIP (3:1), where no new PIP (3:1) is added during the recycling process; and

    (vii) Finished products or articles made of plastic recycled from products or articles containing PIP (3:1), where no new PIP (3:1) was added during the production of the products or articles made of recycled plastic.

    (2) [Reserved]

    (c) Prohibition on releases to water. After March 8, 2021, all persons are prohibited from releasing PIP (3:1) to water during manufacturing, processing and distribution in commerce of PIP (3:1) and PIP (3:1) containing products, and all persons are required to follow all applicable regulations and best management practices for preventing the release of PIP (3:1) and PIP (3:1)-containing products to water during commercial use.

    (d) Recordkeeping.

    (1) After March 8, 2021, persons who manufacture, process, or distribute in commerce PIP (3:1) or PIP (3:1)-containing products or articles must maintain ordinary business records, such as invoices and bills-of-lading, related to compliance with the prohibitions, restrictions, and other provisions of this section. These records must be maintained for a period of three years from the date the record is generated.

    (2) These records must include a statement that the PIP (3:1), or the PIP (3:1)-containing products or articles, are in compliance with 40 CFR 751.407(a).

    (3) These records must be made available to EPA within 30 calendar days upon request.

    (4) The recordkeeping requirements in paragraph (d) of this section do not apply to the activities described in paragraphs (b)(1)(vi) and (vii) of this section. The recordkeeping requirements in paragraph (d) of this section also do not apply to PIP (3:1)-containing articles until March 8October 31, 20222024.

    (e) Downstream notification.

    (1) Each person who manufactures PIP (3:1) for any use after March 8, 2021 must, prior to or concurrent with the shipment, notify persons to whom PIP (3:1) is shipped, in writing, of the restrictions described in this subpart.

    (2) Each person who processes or distributes in commerce PIP (3:1) or PIP (3:1)-containing products for any use after July 6, 2021 must, prior to or concurrent with the shipment, notify persons to whom PIP (3:1) is shipped, in writing, of the restrictions described in this subpart.

    (3) Notification must occur by inserting the text in paragraphs (e)(3)(i) and (e)(3)(ii) in the Safety Data Sheet (SDS) or by including on the label of any PIP (3:1) or PIP (3:1)-containing product the label language in paragraph (e)(3)(iii):

    (i) SDS Section 1.(c): . “The Environmental Protection Agency prohibits processing and distribution of this chemical/product for any use other than: (1) In hydraulic fluids either for the aviation industry or to meet military specifications for safety and performance where no alternative chemical is available that meets U.S. Department of Defense specification requirements, (2) lubricants and greases, (3) new New or replacement parts for motor and aerospace vehicles, (4) as an intermediate in the manufacture of cyanoacrylate glue, (5) in In specialized engine air filters for locomotive and marine applications, and (6) in In adhesives and sealants before January 6, 2025, after which use in adhesives and sealants is prohibited, and (7) in other articles before October 31, 2024, after which use in articles other than new or replacement parts for motor and aerospace vehicles or specialized engine air filters for locomotive and marine applications is prohibited. In addition, all persons are prohibited from releasing PIP (3:1) to water during manufacturing, processing, and distribution in commerce, and must follow all existing regulations and best practices to prevent the release of PIP (3:1) to water during the commercial use of PIP (3:1).”; and

    (ii) SDS Section 15: . “The Environmental Protection Agency prohibits processing and distribution of this chemical/product for any use other than: (1) In hydraulic fluids either for the aviation industry or to meet military specifications for safety and performance where no alternative chemical is available that meets U.S. Department of Defense specification requirements, (2) lubricants and greases, (3) new or replacement parts for motor and aerospace vehicles, (4) as an intermediate in the manufacture of cyanoacrylate glue, (5) in In specialized engine air filters for locomotive and marine applications, and (6) in adhesives and sealants before January 6, 2025, after which use in adhesives and sealants is prohibited, and (7) in other articles before October 31, 2024, after which use in articles other than new or replacement parts for motor and aerospace vehicles or specialized engine air filters for locomotive and marine applications is prohibited. In addition, all persons are prohibited from releasing PIP (3:1) to water during manufacturing, processing, and distribution in commerce, and must follow all existing regulations and best practices to prevent the release of PIP (3:1) to water during the commercial use of PIP (3:1).”; or

    (iii) Labeling: . “The Environmental Protection Agency prohibits processing and distribution of this chemical/product for any use other than: (1) In hydraulic fluids either for the aviation industry or to meet military specifications for safety and performance where no alternative chemical is available that meets U.S. Department of Defense specification requirements, (2) lubricants and greases, (3) new or replacement parts for motor and aerospace vehicles, (4) as an intermediate in the manufacture of cyanoacrylate glue, (5) in In specialized engine air filters for locomotive and marine applications, and (6) in In adhesives and sealants before January 6, 2025, after which use in adhesives and sealants is prohibited, and (7) in other articles before October 31, 2024, after which use in articles other than new or replacement parts for motor and aerospace vehicles or specialized engine air filters for locomotive and marine applications is prohibited. In addition, all persons are prohibited from releasing PIP (3:1) to water during manufacturing, processing, and distribution in commerce, and must follow all existing regulations and best practices to prevent the release of PIP (3:1) to water during the commercial use of PIP (3:1).”

    (4) The downstream notification requirements in this paragraph (e) do not apply to the activities described in paragraphs (b)(1)(vi) and (vii) of this section.

    [86 FR 909, Jan. 6, 2021, as amended at 86 FR 51832, Sept. 17, 2021; 87 FR 12886, Mar. 8, 2022]