Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter U - Air Pollution Controls |
Part 1037 - Control of Emissions from New Heavy-Duty Motor Vehicles |
§ 1037.2 - Who is responsible for compliance? |
§ 1037.10 - How is this part organized? |
§ 1037.15 - Do any other regulation parts apply to me? |
§ 1037.30 - Submission of information. |
Subpart A - Overview and Applicability |
§ 1037.1 - Applicability. |
§ 1037.5 - Excluded vehicles. |
Subpart B - Emission Standards and Related Requirements |
§ 1037.101 - Overview of emission standards. |
§ 1037.102 - Criteria exhaust emission standards—NOX, HC, PM, and CO. |
§ 1037.103 - Evaporative and refueling emission standards. |
§ 1037.104 - Exhaust emission standards for chassis-certified heavy-duty vehicles at or below 14,000 pounds GVWR. |
§ 1037.105 - CO2 emission standards for vocational vehicles. |
§ 1037.106 - CO2 emission standards for tractors above 26,000 pounds GVWR. |
§ 1037.107 - Emission standards for trailers. |
§ 1037.115 - Other requirements. |
§ 1037.120 - Emission-related warranty requirements. |
§ 1037.125 - Maintenance instructions and allowable maintenance. |
§ 1037.130 - Assembly instructions for secondary vehicle manufacturers. |
§ 1037.135 - Labeling. |
§ 1037.140 - Classifying vehicles and determining vehicle parameters. |
§ 1037.150 - Interim provisions. |
Subpart C - Certifying Vehicle Families |
§ 1037.201 - General requirements for obtaining a certificate of conformity. |
§ 1037.205 - What must I include in my application? |
§ 1037.210 - Preliminary approval before certification. |
§ 1037.211 - Preliminary approval for manufacturers of aerodynamic devices. |
§ 1037.220 - Amending maintenance instructions. |
§ 1037.225 - Amending applications for certification. |
§ 1037.230 - Vehicle families, sub-families, and configurations. |
§ 1037.231 - Powertrain families. |
§ 1037.232 - Axle and transmission families. |
§ 1037.235 - Testing requirements for certification. |
§ 1037.241 - Demonstrating compliance with exhaust emission standards for greenhouse gas pollutants. |
§ 1037.243 - Demonstrating compliance with evaporative and refueling emission standards. |
§ 1037.250 - Reporting and recordkeeping. |
§ 1037.255 - What decisions may EPA make regarding my certificate of conformity? |
Subpart D - Testing Production Vehicles and Engines |
§ 1037.301 - Overview of measurements related to GEM inputs in a selective enforcement audit. |
§ 1037.305 - Audit procedures for tractors - aerodynamic testing. |
§ 1037.310 - Audit procedures for trailers. |
§ 1037.315 - Audit procedures related to powertrain testing. |
§ 1037.320 - Audit procedures for axles and transmissions. |
Subpart E - In-Use Testing |
§ 1037.401 - General provisions. |
Subpart F - Test and Modeling Procedures |
§ 1037.501 - General testing and modeling provisions. |
§ 1037.510 - Duty-cycle exhaust testing. |
§ 1037.515 - Determining CO2 emissions to show compliance for trailers. |
§ 1037.520 - Modeling CO2 emissions to show that vehicles comply with standards. |
§ 1037.521 - Aerodynamic measurements. |
§ 1037.525 - Aerodynamic measurements for tractors. |
§ 1037.526 - Aerodynamic measurements for trailers. |
§ 1037.527 - Aerodynamic measurements for vocational vehicles. |
§ 1037.528 - Coastdown procedures for calculating drag area (CdA). |
§ 1037.530 - Wind tunnel procedures for calculating drag area (CdA). |
§ 1037.532 - Using computational fluid dynamics for calculating drag area (CdA). |
§ 1037.534 - Constant-speed procedure for calculating drag area (CdA). |
§ 1037.540 - Special procedures for testing vehicles with hybrid power take-off. |
§ 1037.550 - Powertrain testing. |
§ 1037.551 - Engine-based simulation of powertrain testing. |
§ 1037.555 - Special procedures for testing Phase 1 hybrid systems. |
§ 1037.560 - Axle efficiency test. |
§ 1037.565 - Transmission efficiency test. |
§ 1037.570 - xxx |
Subpart G - Special Compliance Provisions |
§ 1037.601 - General compliance provisions. |
§ 1037.605 - Installing engines certified to alternate standards for specialty vehicles. |
§ 1037.610 - Vehicles with off-cycle technologies. |
§ 1037.615 - Advanced technologies. |
§ 1037.620 - Responsibilities for multiple manufacturers. |
§ 1037.621 - Delegated assembly. |
§ 1037.622 - Shipment of partially complete vehicles to secondary vehicle manufacturers. |
§ 1037.630 - Special purpose tractors. |
§ 1037.631 - Exemption for vocational vehicles intended for off-road use. |
§ 1037.635 - Glider kits and glider vehicles. |
§ 1037.640 - Variable vehicle speed limiters. |
§ 1037.645 - In-use compliance with family emission limits (FELs). |
§ 1037.650 - Tire manufacturers. |
§ 1037.655 - Post-useful life vehicle modifications. |
§ 1037.660 - Idle-reduction technologies. |
§ 1037.665 - Production and in-use tractor testing. |
§ 1037.670 - Optional CO2 emission standards for tractors at or above 120,000 pounds GCWR. |
Subpart H - Averaging, Banking, and Trading for Certification |
§ 1037.701 - General provisions. |
§ 1037.705 - Generating and calculating CO2 emission credits. |
§ 1037.710 - Averaging. |
§ 1037.715 - Banking. |
§ 1037.720 - Trading. |
§ 1037.725 - Required information for certification. |
§ 1037.730 - ABT reports. |
§ 1037.735 - Recordkeeping. |
§ 1037.740 - Restrictions for using emission credits. |
§ 1037.745 - End-of-year CO2 credit deficits. |
§ 1037.750 - What can happen if I do not comply with the provisions of this subpart? |
§ 1037.755 - Information provided to the Department of Transportation. |
Subpart I - Definitions and Other Reference Information |
§ 1037.801 - Definitions. |
§ 1037.805 - Symbols, abbreviations, and acronyms. |
§ 1037.810 - Incorporation by reference. |
§ 1037.815 - Confidential information. |
§ 1037.820 - Requesting a hearing. |
§ 1037.825 - Reporting and recordkeeping requirements. |
Appendix A to Part 1037 - Heavy-Duty Transient Test Cycle |
Appendix B to Part 1037 - Power Take-Off Test Cycle |
Appendix C to Part 1037 - —Emission Control Identifiers |
Appendix D to Part 1037 - —Heavy-Duty Grade Profile for Steady-State Test Cycles |
Appendix E to Part 1037 - Power Take-Off Utility Factors |
Appendix I to Part 1037 - Heavy-Duty Transient Test Cycle |
Appendix V to Part 1037 - Power Take-Off Utility Factors |
Appendix II to Part 1037 - Power Take-Off Test Cycle |
Appendix IV to Part 1037 - Heavy-Duty Grade Profile for Phase 2 Steady-State Test Cycles |
Appendix III to Part 1037 - Emission Control Identifiers |