 |
Code of Federal Regulations (Last Updated: October 10, 2024) |
 |
Title 40 - Protection of Environment |
|
|
Chapter I - Environmental Protection Agency |
|
|
SubChapter D - Water Programs |
|
|
Part 143 - Other Safe Drinking Water Act Regulations |
| § 143.5 - Compliance with secondary maximum contaminant level and public notification for fluoride. |
| Subpart A - National Secondary Drinking Water Regulations |
| § 143.1 - Purpose. |
| § 143.2 - Definitions. |
| § 143.3 - Secondary maximum contaminant levels. |
| § 143.4 - Monitoring. |
| §§ 143.5--143.9 - [Reserved] |
| Subpart B - Use of Lead Free Pipes, Fittings, Fixtures, Solder, and Flux for Drinking Water |
| § 143.10 - Applicability and scope. |
| § 143.11 - Definitions. |
| § 143.12 - Definition of lead free and calculation methodology. |
| § 143.13 - Use prohibitions. |
| § 143.14 - State enforcement of use prohibitions. |
| § 143.15 - Introduction into commerce prohibitions. |
| § 143.16 - Exemptions. |
| § 143.17 - [Reserved] |
| § 143.18 - Required labeling of solder and flux that is not lead free. |
| § 143.19 - Required certification of products. |
| §§ 143.10--143.20 - xxx |
| § 143.20 - Compliance provisions. |