 |
Code of Federal Regulations (Last Updated: May 6, 2024) |
 |
Title 46 - Shipping |
|
|
Chapter I - Coast Guard, Department of Homeland Security |
|
|
SubChapter Q - Equipment, Construction, and Materials: Specifications and Approval |
|
|
Part 164 - Materials |
| Subpart 164.003 - Kapok, Processed |
| § 164.003-1 - Applicable specifications. |
| § 164.003-2 - Grades. |
| § 164.003-3 - Material and workmanship. |
| § 164.003-4 - Inspections and tests. |
| § 164.003-5 - Procedure for approval. |
| Subpart 164.006 - Deck Coverings for Merchant Vessels |
| § 164.006-1 - Applicable specifications. |
| § 164.006-2 - Grades. |
| § 164.006-3 - Construction, materials, and workmanship. |
| § 164.006-4 - Inspection and testing. |
| § 164.006-5 - Procedure for approval. |
| § 164.006-6 - Alternative materials. |
| Subpart 164.007 - Structural Insulations |
| § 164.007-1 - Applicable specification and referenced material. |
| § 164.007-2 - Purpose. |
| § 164.007-3 - Conditions of approval. |
| § 164.007-4 - Testing procedure. |
| § 164.007-5 - Test requirements. |
| § 164.007-6 - Test report. |
| § 164.007-7 - Analysis of results. |
| § 164.007-8 - Retests. |
| § 164.007-9 - Procedure for approval. |
| § 164.007-10 - Alternative materials. |
| Subpart 164.008 - Bulkhead Panels |
| § 164.008-1 - Applicable specification and reference material. |
| § 164.008-2 - Conditions of approval. |
| § 164.008-3 - Testing procedure. |
| § 164.008-4 - Test requirements. |
| § 164.008-5 - Test report. |
| § 164.008-6 - Retests. |
| § 164.008-7 - Procedure for approval. |
| § 164.008-8 - Alternative materials. |
| Subpart 164.009 - Noncombustible Materials for Merchant Vessels |
| § 164.009-1 - General. |
| § 164.009-3 - Noncombustible materials not requiring specific approval. |
| § 164.009-7 - Contents of application. |
| § 164.009-9 - Procedure for approval. |
| § 164.009-11 - Furnace apparatus. |
| § 164.009-13 - Furnace calibration. |
| § 164.009-15 - Test procedure. |
| § 164.009-17 - Density measurement. |
| § 164.009-19 - Measurement of moisture and volatile matter content. |
| § 164.009-21 - Laboratory report. |
| § 164.009-23 - Factory inspection. |
| § 164.009-25 - Marking. |
| § 164.009-26 - Alternative materials. |
| Subpart 164.012 - Interior Finishes for Merchant Vessels |
| § 164.012-1 - Applicable specifications. |
| § 164.012-5 - Scope. |
| § 164.012-10 - Requirements. |
| § 164.012-11 - Marking. |
| § 164.012-12 - Recognized laboratory. |
| § 164.012-13 - Examinations, tests, and inspections. |
| § 164.012-14 - Procedure for listing and labeling. |
| § 164.012-15 - Termination of listing and labeling. |
| § 164.012-16 - Alternative materials. |
| Subpart 164.013 - Foam, Unicellular Polyethylene (Buoyant, Slab, Slitted Trigonal Pattern) |
| § 164.013-1 - Scope. |
| § 164.013-2 - Incorporation by reference. |
| § 164.013-3 - Material properties and workmanship. |
| § 164.013-4 - Samples submitted for acceptance. |
| § 164.013-5 - Acceptance tests. |
| § 164.013-6 - Production tests, inspections, and marking. |
| § 164.013-7 - Marking. |
| Subpart 164.015 - Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape |
| § 164.015-1 - Applicable specifications and standards. |
| § 164.015-2 - Types. |
| § 164.015-3 - Material and workmanship. |
| § 164.015-4 - Inspections and tests. |
| § 164.015-5 - Procedure for acceptance. |
| Subpart 164.018 - Retroreflective Material for Lifesaving Equipment |
| § 164.018-1 - Scope. |
| § 164.018-3 - Classification. |
| § 164.018-5 - Specifications and standards incorporated by reference. |
| § 164.018-7 - Approval procedures. |
| § 164.018-9 - Design requirements. |
| § 164.018-11 - Approval tests. |
| § 164.018-13 - Production inspections. |
| Subpart 164.019 - Personal Flotation Device Components |
| § 164.019-1 - Scope. |
| § 164.019-3 - Definitions. |
| § 164.019-4 - Component requirements. |
| § 164.019-5 - Standard components; acceptance criteria and procedures. |
| § 164.019-7 - Non-standard components; acceptance criteria and procedures. |
| § 164.019-9 - Procedure for acceptance of revisions of design, process, or materials. |
| § 164.019-11 - Certification (affidavits). |
| § 164.019-13 - Production quality control requirements. |
| § 164.019-15 - Component manufacturer records. |
| § 164.019-17 - Recognized laboratory. |
| Subpart 164.023 - Thread for Personal Flotation Devices |
| § 164.023-1 - Scope. |
| § 164.023-3 - Specifications and standards incorporated by reference. |
| § 164.023-5 - Performance; standard thread. |
| § 164.023-7 - Performance; non-standard thread. |
| § 164.023-9 - Samples submitted for acceptance. |
| § 164.023-11 - Acceptance tests. |
| § 164.023-13 - Production tests and inspections. |
| § 164.023-15 - Marking. |
| Subpart 164.105 - Deck Assemblies (A-60) For SOLAS Vessels |
| § 164.105-1 - Scope. |
| § 164.105-2 - Incorporation by reference. |
| § 164.105-3 - Testing, marking, and inspection requirements. |
| § 164.105-4 - Approval procedures. |
| Subpart 164.106 - Primary Deck Coverings for SOLAS Vessels |
| § 164.106-1 - Scope |
| § 164.106-2 - Incorporation by reference. |
| § 164.106-3 - Testing, marking, and inspection requirements. |
| § 164.106-4 - Approval procedures. |
| Subpart 164.107 - Structural Insulation (A-60) for SOLAS Vessels |
| § 164.107-1 - Scope. |
| § 164.107-2 - Incorporation by reference. |
| § 164.107-3 - Testing, marking, and inspection requirements. |
| § 164.107-4 - Approval procedures. |
| Subpart 164.108 - Bulkheads (B-0 and B-15) for SOLAS Vessels |
| § 164.108-1 - Scope. |
| § 164.108-2 - Incorporation by reference. |
| § 164.108-3 - Testing, marking, and inspection requirements. |
| § 164.108-4 - Approval procedures. |
| Subpart 164.109 - Non-combustible Materials (SOLAS) |
| § 164.109-1 - Scope. |
| § 164.109-2 - Incorporation by reference. |
| § 164.109-3 - Testing, marking, and inspection requirements. |
| § 164.109-4 - Approval procedures. |
| Subpart 164.110 - Continuous Ceilings (B-0 and B-15) (SOLAS) |
| § 164.110-1 - Scope. |
| § 164.110-2 - Incorporation by reference. |
| § 164.110-3 - Testing, marking, and inspection requirements. |
| § 164.110-4 - Approval procedures. |
| Subpart 164.111 - Draperies, Curtains, and Other Suspended Textiles |
| § 164.111-1 - Scope. |
| § 164.111-2 - Incorporation by reference. |
| § 164.111-3 - Testing, marking, and inspection requirements. |
| § 164.111-4 - Approval procedures. |
| Subpart 164.112 - Interior Finish (Bulkheads and Ceiling Finishes) (SOLAS) |
| § 164.112-1 - Scope. |
| § 164.112-2 - Incorporation by reference. |
| § 164.112-3 - Testing, marking, and inspection requirements. |
| § 164.112-4 - Approval procedures. |
| Subpart 164.117 - Floor Finish (SOLAS) |
| § 164.117-1 - Scope. |
| § 164.117-2 - Incorporation by reference. |
| § 164.117-3 - Testing, marking, and inspection requirements. |
| § 164.117-4 - Approval procedures. |
| Subpart 164.120 - Fire Retardant Resins for Lifeboats and Rescue Boats |
| § 164.120-1 - Scope. |
| § 164.120-3 - Definitions. |
| § 164.120-5 - Incorporation by reference. |
| § 164.120-7 - Acceptance criteria. |
| § 164.120-9 - Procedure for acceptance. |
| § 164.120-11 - Production quality control requirements. |
| § 164.120-13 - Marking, labeling, and instructions for use. |
| § 164.120-15 - Procedure for acceptance of material change. |
| Subpart 164.136 - Fire Doors |
| § 164.136-1 - Scope. |
| § 164.136-2 - Incorporation by reference. |
| § 164.136-3 - Testing, marking, and inspection requirements. |
| § 164.136-4 - Approval procedures. |
| Subpart 164.137 - Windows |
| § 164.137-1 - Scope. |
| § 164.137-2 - Incorporation by reference. |
| § 164.137-3 - Testing, marking, and inspection requirements. |
| § 164.137-4 - Approval procedures. |
| Subpart 164.138 - Fire Stops (Penetration Seals) |
| § 164.138-1 - Scope. |
| § 164.138-2 - Incorporation by reference. |
| § 164.138-3 - Testing, marking, and inspection requirements. |
| § 164.138-4 - Approval procedures. |
| Subpart 164.139 - Dampers |
| § 164.139-1 - Scope. |
| § 164.139-2 - Incorporation by reference. |
| § 164.139-3 - Testing, marking, and inspection requirements. |
| § 164.139-4 - Approval procedures. |
| Subpart 164.141 - Plastic Pipes |
| § 164.141-1 - Scope. |
| § 164.141-2 - Incorporation by reference. |
| § 164.141-3 - Testing, marking, and inspection requirements. |
| § 164.141-4 - Approval procedures. |
| Subpart 164.142 - Bedding Components |
| § 164.142-1 - Scope. |
| § 164.142-2 - Incorporation by reference. |
| § 164.142-3 - Testing, marking, and inspection requirements. |
| § 164.142-4 - Approval procedures. |
| Subpart 164.144 - Upholstered Furniture |
| § 164.144-1 - Scope. |
| § 164.144-2 - Incorporation by reference. |
| § 164.144-3 - Testing, marking, and inspection requirements. |
| § 164.144-4 - Approval procedures. |
| Subpart 164.146 - Fire Door Control System (SOLAS) |
| § 164.146-1 - Scope. |
| § 164.146-2 - Incorporation by reference. |
| § 164.146-3 - Testing, marking, and inspection requirements. |
| § 164.146-4 - Approval procedures. |
| Subpart 164.201 - Fire-resisting Materials for High-speed Craft |
| § 164.201-1 - Scope. |
| § 164.201-2 - Incorporation by reference. |
| § 164.201-3 - Testing, marking, and inspection requirements. |
| § 164.201-4 - Approval procedures. |
| Subpart 164.207 - Fire-resisting Divisions for High-speed Craft |
| § 164.207-1 - Scope. |
| § 164.207-2 - Incorporation by reference. |
| § 164.207-3 - Testing, marking, and inspection requirements. |
| § 164.207-4 - Approval procedures. |
| Subpart 164.900 - Preemption |
| § 164.900-1 - Preemption of State or local law. |
| § 164.900-3 - [Reserved] |