Code of Federal Regulations (Last Updated: May 6, 2024) |
Title 47 - Telecommunication |
Chapter I - Federal Communications Commission |
SubChapter D - Safety and Special Radio Services |
Part 90 - Private Land Mobile Radio Services |
Subpart L - Authorization in the Band 470-512 MHz (UHF-TV Sharing) |
§ 90.309 - Tables and figures.
-
§ 90.309 Tables and figures.
(a) Directions for using the tables.
(1) Using the method specified in § 1.958 of this chapter, determine the distances between the proposed land mobile base station and the protected co-channel television station and between the proposed land mobile base station and the protected adjacent channel television station. If the exact mileage does not appear in table A for protected co-channel television stations (or table B for channel 15 in New York and Cleveland and channel 16 in Detroit) or table E for protected adjacent channel television stations, the next lower mileage separation figure is to be used.
(2) Entering the proper table at the mileage figure found in paragraph (a)(1) of this section, find opposite, a selection of powers that may be used for antenna heights ranging from 15 m (50 ft) to 152.5 m (500 ft) (AAT). If the exact antenna height proposed for the land mobile base station does not appear in the proper table, use the power figure beneath the next greater antenna height.
(3) The lowest power found using the tables mentioned in paragraphs (a)(1) and (a)(2) of this section is the maximum power that may be employed by the proposed land mobile base station.
(4) In determining the average elevation of the terrain, the elevations between 3.2 kilometers (2 miles) and 16 kilometers (10 miles) from the antenna site are employed. Profile graphs shall be drawn for a minimum of eight radials beginning at the antenna site and extending 16 kilometers (10 miles). The radials should be drawn starting with true north. At least one radial should be constructed in the direction of the nearest co-channel and adjacent channel UHF television stations. The profile graph for each radial shall be plotted by contour intervals of from 12.2 meters (40 feet) to 30.5 meters (100 feet) and, where the data permits, at least 50 points of elevation (generally uniformly spaced) should be used for each radial. For very rugged terrain, 61 meters (200 feet) to 122 meters (400 foot) contour intervals may be used. Where the terrain is uniform or gently sloping, the smallest contour interval indicated on the topographic chart may be used. The average elevation of the 12.8 kilometer (8 mile) distance between 3.2 kilometers (2 miles) and 16 kilometers (10 miles) from the antenna site should be determined from the profile graph for each radial. This may be obtained by averaging a large number of equally spaced points, by using a planimeter, or by obtaining the median elevation (that exceeded by 50 percent of the distance) in sectors and averaging those values. In the preparation of the profile graphs, the elevation or contour intervals may be taken from U.S. Geological Survey Topographic Maps, U.S. Army Corps of Engineers Maps, or Tennessee Valley Authority Maps. Maps with a scale of 1:250,000 or larger (such as 1:24,000) shall be used. Digital Terrain Data Tapes, provided by the National Cartographic Institute, U.S. Geologic Survey, may be utilized in lieu of maps, but the number of data points must be equal to or exceed that specified above. If such maps are not published for the area in question, the next best topographic information should be used.
(5) Applicants for base stations in the Miami, FL, urbanized area may, in lieu of calculating the height of average terrain, use 3 m (10 ft) as the average terrain height.
Table A - Base Station - Cochannel Frequencies (50 dB Protection) Maximum Effective Radiated Power (ERP)1
Distance in kilometers (miles):2 Antenna height in meters (feet) (AAT) 15 (50) 30.5 (100) 45 (150) 61 (200) 76 (250) 91.5 (300) 106 (350) 122 (400) 137 (450) 152.5 (500) 260 (162) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 257 (160) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 800 249 (155) 1,000 1,000 1,000 1,000 1,000 875 775 700 625 575 241 (150) 1,000 1,000 950 775 725 625 550 500 450 400 233 (145) 850 750 650 575 500 440 400 350 320 300 225 (140) 600 575 475 400 350 300 275 250 230 225 217 (135) 450 400 335 300 255 240 200 185 165 150 209 (130) 350 300 245 200 185 160 145 125 120 100 201 (125) 225 200 170 150 125 110 100 90 80 75 193 (120) 175 150 125 105 90 80 70 60 55 50 Table B - Base Station - Cochannel Frequencies (40 dB Protection) Maximum Effective Radiated Power (ERP)1
Distance in kilometers (miles):2 Antenna height in meters (feet) (AAT) 15 (50) 30.5 (100) 45 (150) 61 (200) 76 (250) 91.5 (300) 106 (350) 122 (400) 137 (450) 152.5 (500) 209 (130) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 201 (125) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 850 750 725 193 (120) 1,000 1,000 1,000 1,000 900 750 675 600 550 500 185 (115) 1,100 1,000 800 725 600 525 475 425 375 350 177 (110) 850 700 600 500 425 375 325 300 275 225 169 (105) 600 475 400 325 275 250 225 200 175 150 161 (100) 400 325 275 225 175 150 140 125 110 100 153 (95) 275 225 175 125 110 95 80 70 60 50 145 (90) 175 125 100 75 50 Table C - Mobile and Control Station - Distance Between Associated Base Station and Protected Cochannel TV Station
[50 dB protection]
Effective radiated power (watts) of mobile unit and control station Distance Kilometers Miles 200 249 155 150 243 151 100 233 145 50 217 135 25 201 125 10 188 117 5 180 112 Table D - Mobile and Control Station - Distance Between Associated Land Mobile Base Station and Protected Cochannel TV Station
[40 dB protection]
Effective radiated power (watts) of mobile unit and control station Distance Kilometers Miles 200 209 130 150 201 125 100 193 120 50 185 115 25 177 110 10 169 105 5 161 100 Table E - Base Station Adjacent Channel Frequencies Maximum Effective Radiated Power (ERP)1
Distance in kilometers (miles):2 3 Antenna height in meters (feet) (AAT) 15 (50) 30.5 (100) 45 (150) 61 (200) 76 (250) 91.5 (300) 106 (350) 122 (400) 137 (450) 152.5 (500) 108 (67) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 106 (66) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 750 104 (65) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 825 650 600 103 (64) 1,000 1,000 1,000 1,000 1,000 1,000 775 625 500 400 101 (63) 1,000 1,000 1,000 1,000 1,000 650 450 325 325 225 99 (62) 1,000 1,000 1,000 1,000 525 375 250 200 150 125 98 (61) 1,000 1,000 700 450 250 200 125 100 75 50 96 (60) 1,000 1,000 425 225 125 100 75 50 Table “F” - Decibel Reduction/Power Equivalents
dB reduction below 1 kW ERP permitted (figures rounded) 1 795 2 630 3 500 4 400 5 315 6 250 7 200 8 160 9 125 10 100 11 80 12 65 13 50 14 40 15 30 16 25 17 20 18 15 19 12 20 10 21 8 22 6 23 5 24 4 25 3 26 2.5 27 2 28 1.5 29 1.25 30 1 (b) Directions for Using the Figures.
(1) Determine antenna height above average terrain. (According to § 90.309(a)(4).)
(2) Locate this value on the antenna height axis.
(3) Determine the separation between the LM antenna site and the nearest protected co-channel TV station. (According to § 73.611.)
(4) Draw a vertical line to intersect the LM/TV separation curve at the distance determined in step 3 above. For distances not shown in the graph use linear interpolation.
(5) From the intersection of the LM/TV separation curve draw a horizontal line to the power reduction scale.
(6) The power reduction in dB determines the reduction below 1 kW that must be achieved.
(7) See table F for dB/power equivalents.
[43 FR 54791, Nov. 22, 1978, as amended at 49 FR 36107, Sept. 14, 1984; 49 FR 49837, Dec. 17, 1984; 58 FR 44958, Aug. 25, 1993; 70 FR 19312, Apr. 13, 2005; 72 FR 35197, June 27, 2007]