![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 48 - Federal Acquisition Regulations System |
![]() |
Chapter 30 - Department of Homeland Security, Homeland Security Acquisition Regulation (HSAR) |
![]() |
SubChapter G - Contract Management |
![]() |
Part 3046 - Quality Assurance |
![]() |
Subpart 3046.7 - Warranties |
§ 3046.706 - Warranty terms and conditions.
-
(a) The contracting officer, in developing the warranty terms and conditions, shall consider the following, and, where appropriate and cost beneficial, shall:
(1) Identify the affected line item(s) and the applicable specification(s);
(2) Require that the line item's design and manufacture will conform to:
(i) An identified revision of a top-level drawing; and/or
(ii) An identified specification or revision thereof;
(3) Require that the system conform to the specified Government performance requirements;
(4) Require that all systems and components delivered under the contract will be free from defects in materials and workmanship;
(5) State that in the event of failure due to nonconformance with specification and/or defects in material and workmanship, the contractor will bear the cost of all work necessary to achieve the specified performance requirements, including repair and/or replacement of all parts;
(6) Require the timely replacement/repair of warranted items and specify lead times for replacement/repair where possible;
(7) Identify the specific paragraphs containing Government performance requirements which must be met;
(8) Ensure that any performance requirements identified as goals or objectives in excess of specification requirements are excluded from the warranty provision;
(9) Define what constitutes the start of the warranty period (
e.g., delivery, acceptance, in-service date), the ending of the warranty (e.g., passing a test or demonstration, or operation without failure for a specified time period), and circumstances requiring an extension of warranty duration (e.g., extendingthe warranty period as a result of mass defect correction during warranty period); (10) Identify what transportation costs will be paid by the contractor in conjunction with warranty coverage;
(11) Identify any conditions which will not be covered by the warranty, other than the exclusion of combat damage; and
(12) Identify any limitation on the total dollar amount of the contractor's warranty exposure, or agreement to share costs after a certain dollar threshold to avoid unnecessary warranty returns.
(b) Any contract that contains a warranty clause shall contain warranty implementation procedures, including warranty notification content and procedures, and identify the individuals responsible for implementation of warranty provisions. The contract may also permit the contractor's participation in investigation of system failures, providing that the contractor is reimbursed at established rates for fault isolation work, and that the Government receives credit for any payments where equipment failure is covered by warranty provisions.