§ 40.87 - What validity tests must laboratories conduct on primary urine specimens?  


Latest version.
  • § 40.87 What are the cutoff concentrations for drug tests?

    (a)

    validity tests must laboratories conduct on primary urine specimens?

    As a laboratory, when you

    must use the cutoff concentrations displayed in the following table for initial and confirmatory drug tests. All cutoff concentrations are expressed in nanograms per milliliter (ng/mL). The table follows: Initial test analyte Initial test cutoff1 Confirmatory test analyte Confirmatory test cutoff concentration Marijuana metabolites (THCA)2 50 ng/mL3 THCA15 ng/mL. Cocaine metabolite (Benzoylecgonine)150 ng/mL3 Benzoylecgonine100 ng/mL. Codeine/ Morphine2000 ng/mLCodeine Morphine2000 ng/mL. 2000 ng/mL. Hydrocodone/ Hydromorphone300 ng/mLHydrocodone Hydromorphone100 ng/mL. 100 ng/mL. Oxycodone/ Oxymorphone100 ng/mLOxycodone Oxymorphone100 ng/mL. 100 ng/mL. 6-Acetylmorphine10 ng/mL6-Acetylmorphine10 ng/mL. Phencyclidine25 ng/mLPhencyclidine25 ng/mL. Amphetamine/ Methamphetamine500 ng/mLAmphetamine Methamphetamine250 ng/mL. 250 ng/mL. MDMA4/MDA5 500 ng/mLMDMA MDA250 ng/mL. 250 ng/mL.

    (b) On an initial drug test, you must report a result below the cutoff concentration as negative. If the result is at or above the cutoff concentration, you must conduct a confirmation test.

    (c) On a confirmation drug test, you must report a result below the cutoff concentration as negative and a result at or above the cutoff concentration as confirmed positive.

    (d) You must report quantitative values for morphine or codeine at 15,000 ng/mL or above

    conduct validity testing under § 40.86, you must conduct it in accordance with the requirements of this section.

    (a) You must determine the creatinine concentration on each primary specimen. You must also determine its specific gravity if you find the creatinine concentration to be less than 20 mg/dL.

    (b) You must determine the pH of each primary specimen.

    (c) You must perform one or more validity tests for oxidizing adulterants on each primary specimen.

    (d) You must perform additional validity tests on the primary specimen when the following conditions are observed:

    (1) Abnormal physical characteristics;

    (2) Reactions or responses characteristic of an adulterant obtained during initial or confirmatory drug tests (e.g., non-recovery of internal standards, unusual response); or

    (3) Possible unidentified interfering substance or adulterant.

    (e) If you determine that the specimen is invalid and HHS guidelines direct you to contact the MRO, you must contact the MRO and together decide if testing the primary specimen by another HHS certified laboratory would be useful in being able to report a positive or adulterated test result.

    [65 FR 79526, Dec. 19, 2000, as amended at 75 69 FR 4986264867, AugNov. 16, 2010; 77 FR 26473, May 4, 2012; 82 FR 52244, Nov. 13, 20179, 2004. Redesignated and amended at 88 FR 27643, May 2, 2023]