§ 63.05-1 - Incorporation by reference.


Latest version.
  • § 63.05-1 Incorporation by reference.

    (a)

    Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the Coast Guard must publish

    notice of change

    a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at the U.S. Coast Guard and the National Archives and Records Administration (NARA).

    For information on the availability of this material at NARA, call 202-741-6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. The material is also available for inspection at the Coast Guard Headquarters. Contact

    Contact U.S. Coast Guard Headquarters at: Commandant (CG-ENG), Attn: Office of Design and Engineering

    Systems

    Standards, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE

    .

    , Washington, DC 20593-7509

    . The material is also available from the sources listed in paragraphs (b) through (g) of this section.

    (b) American Gas Association , 1515 Wilson Boulevard, Arlington, VA 22209:

    (1) ANSI/AGA Z21.22-86 Relief Valves and Automatic Shutoff Devices for Hot Water Supply Systems, March 28, 1986 (“ANSI/AGA Z21.22”), 63.25-3; and

    (2) [Reserved]

    (c)

    ; phone (202) 372-1375; email typeapproval@uscg.mil. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations or email fr.inspection@nara.gov. The material may be obtained from the following sources:

    (a) American Society of Mechanical Engineers (ASME)

    International

    ,

    Three

    Two Park Avenue, New York, NY 10016-5990

    :

    ; 800-843-2763; CustomerCare@asme.org; www.asme.org.

    (1) ASME CSD-1-

    2004

    2018, Controls and Safety Devices for Automatically Fired Boilers

    (2004) (

    , issued October 12, 2018 (“ASME CSD-1”)

    ,

    ; IBR approved for §§ 63.10-1(b); 63.15-1(b); 63.20-1

    ; and

    .

    (2) [Reserved]

    (

    d

    b) ASTM International (

    formerly American Society for Testing and Materials) (

    ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959

    :

    ; 610-832-9500; service@astm.org; www.astm.org.

    (1) ASTM

    F 1323

    F1323-

    2001

    14, Standard Specification for Shipboard Incinerators, approved November 1, 2014 (2001) (“ASTM

    F 1323”),

    F1323”); IBR approved for § 63.25-9

    ; and(

    (2) [Reserved]

    (c) Canadian Standards Association (CSA), CSA Group, 5060 Spectrum Way, Suite 100, Mississauga, ON, Canada L4W 5N6; 416-474-2233; techsupport@csagroup.org; https://shop.csa.ca.

    (1) ANSI Z21.22-2015/CSA 4.4-2015, Relief valves for hot water systems, July 2015 (“ANSI Z21.22”); IBR approved for § 63.25-3(a).

    (2) [Reserved]

    Note 1 to paragraph (
    e)
    c):

    CSA material also available from the American National Standards Institute (ANSI), 1899 L Street NW, 11th Floor, Washington, DC 20036; 202-293-8020; info@ansi.org; www.ansi.org.

    (d) International Maritime Organization (IMO),

    Publications Section,

    4 Albert Embankment, London, SE1 7SR United Kingdom

    :(

    ; +44 (0) 20 7735 7611; sales@imo.org; www.imo.org.

    (1) Resolution MEPC.76(40), Standard Specification for Shipboard Incinerators

    (Sep.

    , September 25, 1997

    )

    (“IMO MEPC.76(40)”)

    ,

    ; IBR approved for § 63.25-9

    ;

    (a), (d), and (f).

    (2) Resolution MEPC.244(66), 2014 Standard Specification for Shipboard Incinerators, adopted April 14, 2014 (“IMO MEPC.244(66)”); IBR approved for § 63.25-9(g).

    (3) The International Convention for the Prevention of Pollution from Ships (MARPOL 73/78), Annexes I, II, III, and V

    (

    , 1978

    )

    (“IMO MARPOL 73/78”)

    ,

    ; IBR approved for § 63.25-9(

    f

    (e) International Organization for Standardization (ISO),

    Case postale 56, CH-1211 Geneva 20, Switzerland:

    Chemin de Blandonnet 8, CP 401-1214, Vernier, Geneva, Switzerland; +41 22 749 01 11; central@iso.org; www.iso.org.

    (1) ISO 9096:2017(E), Stationary source emissions—Manual determination of mass concentration of particulate matter,

    Second edition (Feb.

    Third Edition, September 1,

    2003)

    2017 (“ISO 9096”)

    ,

    ; IBR approved for § 63.25-9

    ;

    (2) ISO 10396:2007(E), Stationary source emissions—Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems, Second

    edition (Feb.

    Edition, February 1, 2007

    )

    (“ISO 10396”)

    ,

    ; IBR approved for § 63.25-9

    ; and

    (3) ISO 13617

    , Shipbuilding

    :2019(E), Ships and Marine Technology-Shipboard Incinerators—Requirements,

    Second

    Third Edition

    (Nov. 15, 2001)

    , August 2019 (“ISO 13617”)

    ,

    ; IBR approved for § 63.25-9

    .gUnderwriters' Laboratories, Inc

    .

    (f) UL Solutions (UL),

    12 Laboratory Drive, Research Triangle Park, NC 27709-3995:

    333 Pfingsten Road, Northbrook, IL 60062; 847-272-8800; www.ul.com.

    (1) UL 174, Standard for Safety, Household Electric Storage Tank Water Heaters,

    Tenth

    Eleventh Edition,

    Feb. 28, 1996 (Revisions through and including Nov. 10, 1997)

    dated April 29, 2004, including revisions through December 15, 2016 (“UL 174”)

    ,

    ; IBR approved for § 63.25-3

    ;(

    (a) and (j).

    (2) UL 296, Standard for Safety, Oil Burners

    (1993) (

    , Eleventh Edition, dated February 24, 2017 (“UL 296”)

    ,

    ; IBR approved for § 63.15-5

    ;

    (3) UL 343, Standard for Safety, Pumps for Oil-Burning Appliances,

    Eighth

    Ninth Edition

    (May 27, 1997)

    , dated December 17, 2008, including revisions through June 12, 2013 (“UL 343”)

    ,

    ; IBR approved for § 63.15-3

    ; and

    (4) UL 1453, Standard for Safety, Electric Booster and Commercial Storage Tank Water Heaters,

    Fourth

    6th Edition

    (Sep. 1, 1995)

    , dated March 29, 2016, including revisions through March 9, 2017 (“UL 1453”)

    ,

    ; IBR approved for § 63.25-3(a) and (j).

    [USCG-20032020-166300634, 73 89 FR 65190, Oct. 31, 2008, as amended by USCG-2009-0702, 74 FR 49229, Sept. 25, 2009; USCG-2012-0832, 77 FR 59778, Oct. 1, 2012; USCG-2013-0671, 78 FR 60149, Sept. 30, 201350196, June 12, 2024]