Code of Federal Regulations (Last Updated: July 5, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
Subpart CCCC - National Emission Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast |
Continuous Compliance Requirements |
§ 63.2170 - How do I monitor and collect data to demonstrate continuous compliance?
-
§ 63.2170 How do I monitor and collect data to demonstrate continuous compliance?
(b) Except for monitor periods of monitoring system malfunctions, associated repairs, and required monitoring system quality assurance or control activities (including, as applicable, calibration checks and required zero and span adjustments), and any scheduled maintenance, you must monitor continuously collect data using the CEMS or brew ethanol monitor, as applicable, at all times during each batch monitoring period.
(c) You may not use data recorded during monitoring malfunctions, associated repairs, and required quality assurance or quality control activities in data averages and calculations used to report emission or operating levels, or to fulfill a minimum data availability collection requirement. You must use all the data collected during all other periods in assessing the operation of the control system.
(d) Any hour during the batch monitoring period for which quality-assured VOC CEMS data or brew ethanol monitor data, as applicable, are not obtained is a deviation from monitoring requirements and is counted as an hour of monitoring system downtime.