![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 7 - Agriculture |
![]() |
Subtitle B - Regulations of the Department of Agriculture |
![]() |
Chapter I - Agricultural Marketing Service (Standards, Inspections, Marketing Practices), Department of Agriculture |
![]() |
SubChapter C - Requirements and Standards Under the Agricultural Marketing Act of 1946 and the Egg Products Inspection Act |
![]() |
Part 51 - Fresh Fruits, Vegetables, and Other Products (Inspection, Certification, and Standards) |
![]() |
Subpart G - United States Standards for Grades of Table Grapes (European or Vinifera Type) |
![]() |
Grades |
§ 51.884 - U.S. No. 1 Table.
-
§ 51.884 U.S. No. 1 Table.
“U.S. No. 1 Table” consists of bunches of well developed grapes of one variety, except when designated as assorted varieties, which are at least fairly well colored, uniform in appearance when so specified in connection with the grade, and which meet the following requirements:
(a) Basic requirements for berries:
(1) Mature;
(2) Firm;
(3) Firmly attached to capstem;
(4) Not weak;
(5) Not materially shriveled at capstem;
(6) Not shattered;
(7) Not split or crushed;
(8) Not wet.
(b) Basic requirements for bunches:
(1) Not straggly.
(c) Basic requirements for stems:
(1) Not weak, or dry and brittle.
(d) Berries free from:
(1) Decay;
(2) Waterberry;
(3) Sunburn.
(e) Stems free from:
(1) Mold;
(2) Decay.
(f) Berries not damaged by:
(1) Any other cause.
(g) Bunches not damaged by:
(1) Shot berries;
(2) Dried berries;
(3) Other defective berries;
(4) Trimming away of defective berries;
(5) Any other cause.
(h) Stems not damaged by:
(1) Freezing;
(2) Any other cause.
(i) Size:
(1) For berries: Exclusive of shot berries and dried berries, 75 percent, by count, of the berries on each bunch shall have the minimum diameters indicated for varieties as follows:
(i) Thompson Seedless, Perlette, Delight, Beauty Seedless, Sugraone, Flame Seedless and other seedless varieties nine-sixteenths of an inch.
(ii) Other varieties ten-sixteenths of an inch.
(2) For bunches:
(i) Not less than one-fourth pound.
(j) For tolerances see § 51.886.
[36 FR 9126, May 20, 1971. Redesignated at 42 FR 32514, June 27, 1977, and further redesignated at 46 FR 63203, Dec. 31, 1981, and amended at 48 FR 19350, Apr. 29, 1983; 56 FR 15802, Apr. 18, 1991; 64 FR 14576, Mar. 26, 1999]