Code of Federal Regulations (Last Updated: October 10, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
Subpart MMMM - National Emission Standards for Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts and Products |
Subpart MMMM - National Emission Standards for Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts and Products
What This Subpart Covers |
§ 63.3880 - What is the purpose of this subpart? |
§ 63.3881 - Am I subject to this subpart? |
§ 63.3882 - What parts of my plant does this subpart cover? |
§ 63.3883 - When do I have to comply with this subpart? |
Other Requirements and Information |
§ 63.3980 - Who implements and enforces this subpart? |
§ 63.3981 - What definitions apply to this subpart? |
Compliance Requirements for the Compliant Material Option |
§ 63.3940 - By what date must I conduct the initial compliance demonstration? |
§ 63.3941 - How do I demonstrate initial compliance with the emission limitations? |
§ 63.3942 - How do I demonstrate continuous compliance with the emission limitations? |
Compliance Requirements for the Emission Rate Without Add-on Controls Option |
§ 63.3950 - By what date must I conduct the initial compliance demonstration? |
§ 63.3951 - How do I demonstrate initial compliance with the emission limitations? |
§ 63.3952 - How do I demonstrate continuous compliance with the emission limitations? |
Notifications, Reports, and Records |
§ 63.3910 - What notifications must I submit? |
§ 63.3920 - What reports must I submit? |
§ 63.3930 - What records must I keep? |
§ 63.3931 - In what form and for how long must I keep my records? |
Compliance Requirements for the Emission Rate With Add-on Controls Option |
§ 63.3960 - By what date must I conduct performance tests and other initial compliance demonstrations? |
§ 63.3961 - How do I demonstrate initial compliance? |
§ 63.3962 - [Reserved] |
§ 63.3963 - How do I demonstrate continuous compliance with the emission limitations? |
§ 63.3964 - What are the general requirements for performance tests? |
§ 63.3965 - How do I determine the emission capture system efficiency? |
§ 63.3966 - How do I determine the add-on control device emission destruction or removal efficiency? |
§ 63.3967 - How do I establish the emission capture system and add-on control device operating limits during the performance test? |
§ 63.3968 - What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? |
General Compliance Requirements |
§ 63.3900 - What are my general requirements for complying with this subpart? |
§ 63.3901 - What parts of the General Provisions apply to me? |
Emission Limitations |
§ 63.3890 - What emission limits must I meet? |
§ 63.3891 - What are my options for meeting the emission limits? |
§ 63.3892 - What operating limits must I meet? |
§ 63.3893 - What work practice standards must I meet? |
Table 1 to Subpart MMMM of Part 63 - Operating Limits if Using the Emission Rate With Add-On Controls Option |
Table 2 to Subpart MMMM of Part 63 - Applicability of General Provisions to Subpart MMMM of Part 63 |
Table 3 to Subpart MMMM of Part 63 - Default Organic HAP Mass Fraction for Solvents and Solvent Blends |
Table 4 to Subpart MMMM of Part 63 - Default Organic HAP Mass Fraction for Petroleum Solvent Groups a |
Table 5 to Subpart MMMM of Part 63 - List of HAP That Must Be Counted Toward Total Organic HAP Content If Present at 0.1 Percent or More by Mass |
Appendix A to Subpart MMMM of Part 63 - Alternative Capture Efficiency and Destruction Efficiency Measurement and Monitoring Procedures for Magnet Wire Coating Operations |