Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 14 - Aeronautics and Space |
Chapter I - Federal Aviation Administration, Department of Transportation |
SubChapter C - Aircraft |
Part 21 - Certification Procedures for Products and Articles |
Subpart A - General |
§ 21.6 - Manufacture of new aircraft, aircraft engines, and propellers.
-
§ 21.6 Manufacture of new aircraft, aircraft engines, and propellers.
(a) Except as specified in paragraphs (b) and (c) of this section, no person may manufacture a new aircraft, aircraft engine, or propeller based on a type certificate unless the person -
(1) Is the holder of the type certificate or has a licensing agreement from the holder of the type certificate to manufacture the product; and
(2) Meets the requirements of subpart F or G of this part.
(b) A person may manufacture one new aircraft based on a type certificate without meeting the requirements of paragraph (a) of this section if that person can provide evidence acceptable to the FAA that the manufacture of the aircraft by that person began before August 5, 2004.
(c) The requirements of this section do not apply to -
(1) New aircraft imported under the provisions of §§ 21.183(c), 21.184(b), or 21.185(c); and
(2) New aircraft engines or propellers imported under the provisions of § 21.500.
[Doc. No. FAA-2003-14825, 71 FR 52258, Sept. 1, 2006]