 |
Code of Federal Regulations (Last Updated: July 5, 2024) |
 |
Title 16 - Commercial Practices |
|
|
Chapter II - Consumer Product Safety Commission |
|
|
SubChapter B - Consumer Product Safety Act Regulations |
|
|
Part 1209 - Interim Safety Standard for Cellulose Insulation |
|
|
Subpart A - The Standard |
| § 1209.1 - Scope and application. |
| § 1209.2 - Definitions and measurements. |
| § 1209.3 - General requirements. |
| § 1209.4 - Test procedures for determining settled density. |
| § 1209.5 - Test procedures for corrosiveness. |
| § 1209.6 - Test procedures for critical radiant flux. |
| § 1209.7 - Test procedures for smoldering combustion. |
| § 1209.8 - Procedure for calibration of radiation instrumentation. |
| § 1209.9 - Labeling requirement. |
| § 1209.10 - Certification and enforcement. |
| § 1209.11 - Effective date. |
| Figure 1 to Subpart A of Part 1209 - Partial Insulation Preparation Apparatus |
| Figure 10 to Subpart A of Part 1209 - Insulation Radiant Panel Test Data Log Format |
| Figure 2 to Subpart A of Part 1209 - Cyclone Receiver Weldment |
| Figure 3 to Subpart A of Part 1209 - Flooring Radiant Tester Schematic Side Elevation |
| Figure 4 to Subpart A of Part 1209 - Flooring Radiant Panel Tester Schematic Low Flux End, Elevation |
| Figure 5 to Subpart A of Part 1209 - Zero Reference Point Related to Detecting Plane |
| Figure 6 to Subpart A of Part 1209 - Dummy Specimen in Specimen Holder |
| Figure 7 to Subpart A of Part 1209 - Specimen Tray |
| Figure 8 to Subpart A of Part 1209 - Standard Radiant Heat Energy Flux Profile |
| Figure 9 to Subpart A of Part 1209 - Flux Profile Data Log Format |