Subpart A - The Standard

§ 1633.1 - Purpose, scope and applicability.

§ 1633.2 - Definitions.

§ 1633.3 - General requirements.

§ 1633.4 - Prototype testing requirements.

§ 1633.5 - Prototype pooling and confirmation testing requirements.

§ 1633.6 - Quality assurance requirements.

§ 1633.7 - Mattress test procedure.

§ 1633.8 - Findings.

§ 1633.9 - Glossary of terms.

Subpart B - Rules and Regulations

§ 1633.10 - Definitions.

§ 1633.11 - Records.

§ 1633.12 - Labeling.

§ 1633.13 - Tests for guaranty purposes, compliance with this section, and “one of a kind” exemption.

Figure 6 to Part 1633 - Burner Assembly Showing Arms and Pivots (Shoulder Screws), in Relation to, Portable Frame Allowing Burner Height Adjustment

Figure 1 to Part 1633 - Test Assembly, Shown in Furniture Calorimeter (Configuration A)

Figure 10 to Part 1633 - Jig for Setting Burners at Proper Distances From Mattress/Foundation

Figure 11 to Part 1633 - Diagrams for Glossary of Terms

Figure 12 to Part 1633 - Labels for Domestic Mattress With Foundation

Figure 13 to Part 1633 - Labels for Imported Mattress With Foundation

Figure 2 to Part 1633 - Test Arrangement in 3.05m × 3.66m (10 ft × 12 ft) Room (Configuration B)

Figure 3 to Part 1633 - Details of Horizontal Burner Head

Figure 4 to Part 1633 - Details of Vertical Burner Head

Figure 5 to Part 1633 - Details of Burner Stand-off

Figure 7 to Part 1633 - Elements of Propane Flow Control for Each Burner

Figure 8 to Part 1633 - Jig for Setting Mattresses and Foundation Sides in Same Plane

Figure 9 to Part 1633 - Burner Placements on Mattress/Foundation

Figures 14 and 15 to Part 1633 - Label for Domestic Mattress Alone and with Foundation and Label for Imported Mattress Alone and With Foundation

Figures 16 and 17 to Part 1633 - Label for Domestic Mattress Only and Label for Imported Mattress Only