![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 16 - Commercial Practices |
![]() |
Chapter II - Consumer Product Safety Commission |
![]() |
SubChapter B - Consumer Product Safety Act Regulations |
![]() |
Part 1203 - Safety Standard for Bicycle Helmets |
![]() |
Subpart A - The Standard |
§ 1203.5 - Construction requirements - projections.
Latest version.
-
§ 1203.5 Construction requirements - projections.
Any unfaired projection extending more than 7 mm (0.28 in.) from the helmet's outer surface shall break away or collapse when impacted with forces equivalent to those produced by the applicable impact-attenuation tests in § 1203.17 of this standard. There shall be no fixture on the helmet's inner surface projecting more than 2 mm into the helmet interior.