![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 16 - Commercial Practices |
![]() |
Chapter II - Consumer Product Safety Commission |
![]() |
SubChapter C - Federal Hazardous Substances Act Regulations |
![]() |
Part 1505 - Requirements for Electrically Operated Toys or Other Electrically Operated Articles Intended for Use by Children |
![]() |
Subpart B - Policies and Interpretations |
§ 1505.51 - Hot surfaces.
Latest version.
-
§ 1505.51 Hot surfaces.
(a) Test probe. Section 1505.6(g)(2) defines accessibility, for certain paragraphs, as the ability to reach a heated surface with a 1⁄4-inch-diameter rod 3 inches long. To test for accessibility using this test probe, it shall be inserted no more than 3 inches into any opening in the toy. Unless the probe contacts a surface within 3 inches of the plane of the toy's opening, that surface is not accessible.
(b) Accessibility of Type C and C-marked surfaces. Under § 1505.6(g)(2) (iii) and (iv), touching by casual contact or without employing the aid of a common household tool shall be determined by use of the accessibility test probe described in §§ 1505.6(g)(2) and 1505.51(a).
[51 FR 34199, Sept. 26, 1986]