![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 30 - Mineral Resources |
![]() |
Chapter V - Bureau of Ocean Energy Management, Department of the Interior |
![]() |
SubChapter B - Offshore |
![]() |
Part 550 - Oil and Gas and Sulphur Operations in the Outer Continental Shelf |
![]() |
Subpart K - Oil and Gas Production Requirements. |
![]() |
Other Requirements |
§ 550.1167 - What information must I submit with forms and for approvals?
Latest version.
-
§ 550.1167 What information must I submit with forms and for approvals?
You must submit the supporting information listed in the following table with the form identified in column 1 and for the approval required under this subpart identified in column 2:
SRI BOEM-0127
(2 copies)Reservoir reclassification (a) Maps: (1) Base map with surface, bottomhole, and completion locations with respect to the unit or lease line and the orientation of representative seismic lines or cross-sections (2) Structure maps with penetration point and subsea depth for each well penetrating the reservoirs, highlighting subject wells; reservoir boundaries; and original and current fluid levels √ √ (3) Net sand isopach with total net sand penetrated for each well, identified at the penetration point * (4) Net hydrocarbon isopach with net feet of pay for each well, identified at the penetration point * (b) Seismic data: (1) Representative seismic lines, including strike and dip lines that confirm the structure; indicate polarity (2) Amplitude extraction of seismic horizon, if applicable √ (c) Logs: (1) Well log sections with tops and bottoms of the reservoir(s) and proposed or existing perforations √ √ (2) Structural cross-sections showing the subject well and nearby wells √ (d) Engineering data: (1) Estimated recoverable reserves for each well completion in the reservoir; total recoverable reserves for each reservoir; method of calculation; reservoir parameters used in volumetric and decline curve analysis √ (2) Well schematics showing current and proposed conditions (3) The drive mechanism of each reservoir √ √ (4) Pressure data, by date, and whether they are estimated or measured √ (5) Production data and decline curve analysis indicative of the reservoir performance √ (6) Reservoir simulation with the reservoir parameters used, history matches, and prediction runs (include proposed development scenario) * (e) General information: (1) Detailed economic analysis (2) Reservoir name and whether or not it is competitive as defined under § 250.105 √ √ (3) Operator name, lessee name(s), block, lease number, royalty rate, and unit number (if applicable) of all relevant leases (4) Geologic overview of project √ (5) Explanation of why the proposed completion scenario will maximize ultimate recovery (6) List of all wells in subject reservoirs that have ever produced or been used for injection √ (f) Depending on the type of approval requested, you must submit the appropriate payment of the service fee(s) listed in § 550.125, according to the instructions in § 550.126.