![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 30 - Mineral Resources |
![]() |
Chapter I - Mine Safety and Health Administration, Department of Labor |
![]() |
SubChapter B - Testing, Evaluation, and Approval of Mining Products |
![]() |
Part 7 - Testing by Applicant or Third Party |
![]() |
Subpart J - Electric Motor Assemblies |
§ 7.305 - Critical characteristics.
Latest version.
-
§ 7.305 Critical characteristics.
The following critical characteristics shall be inspected on each motor assembly to which an approval marking is affixed:
(a) Finish, width, and planarity of surfaces that form any part of a flame-arresting path.
(b) Clearances between mating parts that form flame-arresting paths.
(c) Thickness of walls, flanges, and covers that are essential in maintaining the explosion-proof integrity of the enclosure.
(d) Spacing of fastenings.
(e) Length of thread engagement on fastenings and threaded parts that assure the explosion-proof integrity of the enclosure.
(f) Use of lockwasher or equivalent with all fastenings.
(g) Dimensions which affect compliance with the requirements for packing gland parts in § 7.304 of this part.