![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 30 - Mineral Resources |
![]() |
Chapter I - Mine Safety and Health Administration, Department of Labor |
![]() |
SubChapter O - Coal Mine Safety and Health |
![]() |
Part 77 - Mandatory Safety Standards, Surface Coal Mines and Surface Work Areas of Underground Coal Mines |
![]() |
Subpart D - Thermal Dryers |
§ 77.310 - Control panels.
Latest version.
-
§ 77.310 Control panels.
(a) All thermal dryer system control panels constructed after June 30, 1971 shall be located in an area which is relatively free of moisture and dust and shall be installed in such a manner as to minimize vibration.
(b) A schematic diagram containing legends which show the location of each thermocouple, pressure tap, or other control or gaging instrument in the drying system shall be posted on or near the control panel of each thermal drying system.
(c) Each instrument on the control panel shall be identified by a nameplate or equivalent marking.
(d) A plan to control the operation of each thermal dryer system shall be posted at or near the control panel showing a sequence of startup, normal shutdown, and emergency shutdown procedures.