![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 33 - Navigation and Navigable Waters |
![]() |
Chapter I - Coast Guard, Department of Homeland Security |
![]() |
SubChapter O - Pollution |
![]() |
Part 157 - Rules for the Protection of the Marine Environment Relating to Tank Vessels Carrying Oil in Bulk |
![]() |
Subpart E - Dedicated Clean Ballast Tanks on Tank Vessels |
![]() |
Design and Equipment |
§ 157.222 - Pump and piping arrangements.
-
§ 157.222 Pump and piping arrangements.
(a) Dedicated clean ballast tanks must be connected to the least practicable:
(1) Number of pumps; and
(2) Amount of piping.
(b) Each piping system that is arranged to convey clean ballast and cargo must be designed to be flushed to the slop tank with water.
(c) The piping system of each dedicated clean ballast tank must be arranged so that oily water does not enter any dedicated clean ballast tank when the piping system is flushed.
(d) The piping system of each dedicated clean ballast tank must have at least two valves that isolate that tank from each cargo tank.
(e) The piping system of the dedicated clean ballast tanks must have a sample point that is located in a vertical section of discharge piping.
Note:An example of a sample point is shown in 46 CFR Figure 162.050-17(e).