Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 60 - Standards of Performance for New Stationary Sources |
Subpart KKKK - Standards of Performance for Stationary Combustion Turbines |
Monitoring |
§ 60.4335 - How do I demonstrate compliance for NOX if I use water or steam injection? |
§ 60.4340 - How do I demonstrate continuous compliance for NOX if I do not use water or steam injection? |
§ 60.4345 - What are the requirements for the continuous emission monitoring system equipment, if I choose to use this option? |
§ 60.4350 - How do I use data from the continuous emission monitoring equipment to identify excess emissions? |
§ 60.4355 - How do I establish and document a proper parameter monitoring plan? |
§ 60.4360 - How do I determine the total sulfur content of the turbine's combustion fuel? |
§ 60.4365 - How can I be exempted from monitoring the total sulfur content of the fuel? |
§ 60.4370 - How often must I determine the sulfur content of the fuel? |
Introduction |
§ 60.4300 - What is the purpose of this subpart? |
Definitions |
§ 60.4420 - What definitions apply to this subpart? |
Emission Limits |
§ 60.4315 - What pollutants are regulated by this subpart? |
§ 60.4320 - What emission limits must I meet for nitrogen oxides (NOX)? |
§ 60.4325 - What emission limits must I meet for NOX if my turbine burns both natural gas and distillate oil (or some other combination of fuels)? |
§ 60.4330 - What emission limits must I meet for sulfur dioxide (SO2? |
Applicability |
§ 60.4305 - Does this subpart apply to my stationary combustion turbine? |
§ 60.4310 - What types of operations are exempt from these standards of performance? |
Performance Tests |
§ 60.4400 - How do I conduct the initial and subsequent performance tests, regarding NOX? |
§ 60.4405 - How do I perform the initial performance test if I have chosen to install a NOX-diluent CEMS? |
§ 60.4410 - How do I establish a valid parameter range if I have chosen to continuously monitor parameters? |
§ 60.4415 - How do I conduct the initial and subsequent performance tests for sulfur? |
General Compliance Requirements |
§ 60.4333 - What are my general requirements for complying with this subpart? |
Reporting |
§ 60.4375 - What reports must I submit? |
§ 60.4380 - How are excess emissions and monitor downtime defined for NOX? |
§ 60.4385 - How are excess emissions and monitoring downtime defined for SO2? |
§ 60.4390 - What are my reporting requirements if I operate an emergency combustion turbine or a research and development turbine? |
§ 60.4395 - When must I submit my reports? |
Table 1 to Subpart KKKK of Part 60 - Nitrogen Oxide Emission Limits for New Stationary Combustion Turbines |