§ 720.45 - Information that must be included in the notice form.  


Latest version.
  • § 720.45 Information that must be included in the notice form.

    Each person who submits a notice must include the information specified in the notice form to the extent it is known to or reasonably ascertainable by the submitter. However, no person is required to include information which relates solely to exposure of human or ecological populations outside of the United States. The notice form requires the following information relating to the manufacture, processing, distribution in commerce, use, and disposal of the new chemical substance:

    (a)

    (1) The specific chemical identity of the substance that the person intends to manufacture or import, which includes the following:

    (i) The currently correct Chemical Abstracts (CA) name for the substance, based on the Ninth Collective Index (9CI) of CA nomenclature rules and conventions, and consistent with listings for similar substances in the Inventory. For each substance having a chemical composition that can be represented by a specific, complete chemical structure diagram (a Class 1 substance), a CA Index Name must be provided. For each chemical substance that cannot be fully represented by a complete, specific chemical structure diagram (a Class 2 substance), or if the substance is a polymer, a CA Index Name or CA Preferred Name must be provided (whichever is appropriate based on CA 9CI nomenclature rules and conventions). In addition, for a Class 2 substance, the notice must identify the immediate chemical precursors and reactants by specific chemical name and Chemical Abstracts Service Registry Number (CASRN), if the number is available. Tradenames or generic names of chemical precursors or reactants are not acceptable as substitutes for specific chemical names.

    (ii) The currently correct CASRN for the substance if a CASRN already exists for the substance.

    (iii) For a Class 1 substance and for any Class 2 substance for which a definite molecular formula is known or reasonably ascertainable, the correct molecular formula.

    (iv) For a Class 1 substance, a complete, correct chemical structure diagram; for a Class 2 substance or polymer, a correct representative or partial chemical structure diagram, as complete as can be known, if one can be reasonably ascertained.

    (2) For a polymer, the submitter must also report the following:

    (i) The specific chemical name and CASRN, if the number is available, of each monomer and other reactant used, at any weight percent, to manufacture the polymer. Tradenames or generic names of chemical reactants or monomers are not acceptable as substitutes for specific chemical names.

    (ii) The typical percent by weight of each monomer and other reactant in the polymer (weight of the monomer or other reactant expressed as a percentage of the weight of the polymeric chemical substance manufactured), and the maximum residual amount of each monomer present in the polymer.

    (iii) For monomers and other reactants used at 2 weight percent or less (based on the dry weight of the polymer manufactured), indicate on the PMN form any such monomers and other reactants that should be included as part of the polymer description on the Inventory, where the weight percent is based on either

    (A) the weight of monomer or other reactant actually charged to the reaction vessel, or

    (B) the minimum weight of monomer or other reactant required in theory to account for the actual weight of monomer or other reactant molecules or fragments chemically incorporated (chemically combined) in the polymeric substance manufactured.

    (iv) For a determination that 2 weight percent or less of a monomer or other reactant is incorporated (chemically combined) in a polymeric substance manufactured, as specified in paragraphs (a)(2)(iii)(B) of this section, analytical data or appropriate theoretical calculations (if it can be documented that analytical measurement is not feasible or not necessary) to support this determination must be maintained at the site of manufacture or import of the polymer.

    (v) Measured or estimated values of the minimum number-average molecular weight of the polymer and the amount of low molecular weight species below 500 and below 1,000 molecular weight, with a description of how the measured or estimated values were obtained.

    (3) The person must use one of the following two methods to develop or obtain the specified chemical identity information reported under paragraphs (a) (1) and (2) of this section and must identify the method used in the notice:

    (i) Method 1. Obtain the correct chemical identity information required by paragraphs (a) (1) and (2) of this section directly from the Chemical Abstracts Service (CAS), specifically from the CAS Registry Services Inventory Expert Service, prior to submitting a notice to EPA. A copy of the chemical identification report obtained from CAS must be submitted with the notice.

    (ii) Method 2. Obtain the correct chemical identity information required by paragraphs (a) (1) and (2) from any source. The notice will be incomplete according to § 720.65(c)(1)(vi) if the person uses Method 2 and any chemical identity information is determined to be incorrect by EPA.

    (4) If an importer submitting the notice cannot provide all the information specified in paragraphs (a) (1) and (2) of this section because it is claimed as confidential by the foreign supplier of the substance, the importer must have the foreign supplier follow the procedures in paragraph (a)(3) of this section and provide the correct chemical identity information specified in paragraphs (a) (1) and (2) of this section directly to EPA in a joint submission or as a letter of support to the notice, which clearly references the importer's notice and PMN User Fee Identification Number. The statutory review process will commence upon receipt of both the notice and the complete, correct information.

    (5) If a manufacturer cannot provide all the information specified in paragraphs (a)(1) and (2) of this section because the new chemical substance is manufactured using a reactant having a specific chemical identity claimed as confidential by its supplier, the manufacturer must submit a notice directly to EPA containing all the information known by the manufacturer about the chemical identity of the reported substance and its proprietary reactant. In addition, the manufacturer must ensure that the supplier of the confidential reactant submit a letter of support directly to EPA providing the specific chemical identity of the confidential reactant, including the CAS number, if available, and the appropriate PMN or exemption number, if applicable. The letter of support must reference the manufacturer's name and PMN Fee Identification Number. The statutory review period will commence upon receipt of both the notice and the letter of support.

    (b) The impurities anticipated to be present in the substance by name, CAS Registry number, and weight percent of the total substance.

    (c) Known synonyms or trade names of the new chemical substance.

    (d) A description of the byproducts resulting from the manufacture, processing, use, and disposal of the new chemical substance.

    (e) The estimated maximum amount to be manufactured or imported during the first year of production and the estimated maximum amount to be manufactured or imported during any 12-month period during the first three years of production.

    (f) A description of intended categories of use by function and application, the estimated percent of production volume devoted to each category of use, and the percent of the new substance in the formulation for each commercial or consumer use.

    (g) For sites controlled by the submitter:

    (1) The identity of sites where the new substance will be manufactured, processed, or used.

    (2) A process description of each manufacture, processing, and use operation which includes a diagram of the major unit operations and chemical conversions, the identity and entry point of all feedstocks, and the points of release of the new chemical substance.

    (3) Worker exposure information, including worker activities, physical form of the new substance to which workers may be exposed, the number of workers, and the duration of activities.

    (4) Information on release of the new substance to the environment, including the quantity and media of release and type of control technology used.

    (h) For sites not controlled by the submitter, a description of each type of processing and use operation involving the new chemical substance, including identification of the estimated number of processing or use sites, situations in which worker exposure to and/or environmental release of the new chemical substance will occur, the number of workers exposed and the duration of exposure, and controls which limit worker exposure and environmental release.

    (i) Any safety data sheet already developed for the new chemical substance, including draft safety data sheets.

    [48 FR 21742, May 13, 1983, as amended at 60 FR 16310, Mar. 29, 1995; 83 FR 52719, Oct. 17, 2018; 87 FR 39763, July 5, 2022]