![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 48 - Federal Acquisition Regulations System |
![]() |
Chapter 5 - General Services Administration |
![]() |
SubChapter H - Clauses and Forms |
![]() |
Part 552 - Solicitation Provisions and Contract Clauses |
![]() |
Subpart 552.2 - Text of Provisions and Clauses |
§ 552.214-72 - Bid Sample Requirements.
-
552.214-72 Bid Sample Requirements.
As prescribed in 514.202-4(a)(3), insert the following provision:
Bid Sample Requirements (OCT 2009)
This provision supplements FAR 52.214-20, which is incorporated by reference. Samples shall be from the production of the manufacturer whose products will be supplied under resultant contracts.
(a) Two bid samples are required for each of the following items in this solicitation:
(b) Two representative samples shall be submitted for each of the following items upon which a bid is submitted:
Items Acceptable representative samples Note:Bidders that propose to furnish an item or group of items from more than one manufacturer or production point must submit two samples from the production of each manufacturer or production point.
(c) Samples will be evaluated to determine compliance with all characteristics listed below:
Subjective characteristics Objective characteristics (d) Forward samples addressed to the Sample Room indicated below. Except for samples delivered by U.S. Mail, deliveries will be accepted between the hours of ____________________ Mondays through Fridays, official holidays excluded.
Caution: Use proper address for method of shipment selected.
Mail and Parcel Post
(Insert Address of Bid Sample Room)
Freight or Express
(Insert address of Bid Sample Room)
(e) Contracting Officer insert address.
(End of provision)
[64 FR 37229, July 9, 1999, as amended at 74 FR 47740, Sept. 17, 2009]