 |
Code of Federal Regulations (Last Updated: November 8, 2024) |
 |
Title 49 - Transportation |
|
|
Subtitle B - Other Regulations Relating to Transportation |
|
|
Chapter II - Federal Railroad Administration, Department of Transportation |
|
|
Part 230 - Steam Locomotive Inspection and Maintenance Standards |
| § 230.0 - Steam powered locomotives. |
| Subpart A - General |
| § 230.1 - Purpose and scope. |
| § 230.2 - Applicability. |
| § 230.3 - Implementation. |
| § 230.4 - Penalties. |
| § 230.5 - Preemptive effect. |
| § 230.6 - Waivers. |
| § 230.7 - Responsibility for compliance. |
| § 230.8 - Definitions. |
| § 230.9 - Information collection. |
| § 230.10 - [Reserved] |
| Recordkeeping Requirements |
| § 230.18 - Service days. |
| § 230.19 - Posting of FRA Form No. 1 and FRA Form No. 3. |
| § 230.20 - Alteration and repair report for steam locomotive boilers. |
| § 230.21 - Steam locomotive number change. |
| § 230.22 - Accident reports. |
| General Inspection Requirements |
| § 230.11 - Repair of non-complying conditions. |
| § 230.12 - Movement of non-complying steam locomotives. |
| § 230.13 - Daily inspection. |
| § 230.14 - Thirty-one (31) service day inspection. |
| § 230.15 - Ninety-two (92) service day inspection. |
| § 230.16 - Annual inspection. |
| § 230.17 - One thousand four hundred seventy-two (1472) service day inspection. |
| Subpart B - Boilers and Appurtenances |
| § 230.23 - Responsibility for general construction and safe working pressure. |
| Injectors, Feedwater Pumps, and Flue Plugs |
| § 230.57 - Injectors and feedwater pumps. |
| § 230.58 - Flue plugs. |
| Fusible Plugs |
| § 230.59 - Fusible plugs. |
| Staybolts |
| § 230.38 - Telltale holes. |
| § 230.39 - Broken staybolts. |
| § 230.40 - Time and method of staybolt testing. |
| § 230.41 - Flexible staybolts with caps. |
| Steam Leaks |
| § 230.64 - Leaks under lagging. |
| § 230.65 - Steam blocking view of engine crew. |
| Inspection and Repair |
| § 230.29 - Inspection and repair. |
| § 230.30 - Lap-joint seam boilers. |
| § 230.31 - Flues to be removed. |
| § 230.32 - Time and method of inspection. |
| § 230.33 - Welded repairs and alterations. |
| § 230.34 - Riveted repairs and alterations. |
| Pressure Testing of Boilers |
| § 230.35 - Pressure testing. |
| § 230.36 - Hydrostatic testing of boilers. |
| § 230.37 - Steam test following repairs or alterations. |
| Steam Pipes |
| § 230.62 - Dry pipe. |
| § 230.63 - Smoke box, steam pipes and pressure parts. |
| Steam Gauges |
| § 230.42 - Location of gauges. |
| § 230.43 - Gauge siphon. |
| § 230.44 - Time of testing. |
| § 230.45 - Method of testing. |
| § 230.46 - Badge plates. |
| § 230.47 - Boiler number. |
| Water Glasses and Gauge Cocks |
| § 230.51 - Number and location. |
| § 230.52 - Water glass valves. |
| § 230.53 - Time of cleaning. |
| § 230.54 - Testing and maintenance. |
| § 230.55 - Tubular type water and lubricator glasses and shields. |
| § 230.56 - Water glass lamps. |
| Strength of Materials |
| § 230.26 - Tensile strength of shell plates. |
| § 230.27 - Maximum shearing strength of rivets. |
| § 230.28 - Higher shearing strength of rivets. |
| Safety Relief Valves |
| § 230.48 - Number and capacity. |
| § 230.49 - Setting of safety relief valves. |
| § 230.50 - Time of testing. |
| Washing Boilers |
| § 230.60 - Time of washing. |
| § 230.61 - Arch tubes, water bar tubes, circulators and thermic siphons. |
| Allowable Stress |
| § 230.24 - Maximum allowable stress. |
| § 230.25 - Maximum allowable stress on stays and braces. |
| Subpart C - Steam Locomotives and Tenders |
| § 230.66 - Design, construction, and maintenance. |
| § 230.67 - Responsibility for inspection and repairs. |
| Speed Indicators |
| § 230.68 - Speed indicators. |
| Draw Gear and Draft Systems |
| § 230.90 - Draw gear between steam locomotive and tender. |
| § 230.91 - Chafing irons. |
| § 230.92 - Draw gear and draft systems. |
| Wheels and Tires |
| § 230.112 - Wheels and tires. |
| § 230.113 - Wheels and tire defects. |
| § 230.114 - Wheel centers. |
| Cabs, Warning Signals, Sanders and Lights |
| § 230.80 - Cabs. |
| § 230.81 - Cab aprons. |
| § 230.82 - Fire doors. |
| § 230.83 - Cylinder cocks. |
| § 230.84 - Sanders. |
| § 230.85 - Audible warning device. |
| § 230.86 - Required illumination. |
| § 230.87 - Cab lights. |
| Brake and Signal Equipment |
| § 230.70 - Safe condition. |
| § 230.71 - Orifice testing of compressors. |
| § 230.72 - Testing main reservoirs. |
| § 230.73 - Air gauges. |
| § 230.74 - Time of cleaning. |
| § 230.75 - Stenciling dates of tests and cleaning. |
| § 230.76 - Piston travel. |
| § 230.77 - Foundation brake gear. |
| § 230.78 - Leakage. |
| § 230.79 - Train signal system. |
| Running Gear |
| § 230.98 - Driving, trailing, and engine truck axles. |
| § 230.99 - Tender truck axles. |
| § 230.100 - Defects in tender truck axles and journals. |
| § 230.101 - Steam locomotive driving journal boxes. |
| § 230.102 - Tender plain bearing journal boxes. |
| § 230.103 - Tender roller bearing journal boxes. |
| § 230.104 - Driving box shoes and wedges. |
| § 230.105 - Lateral motion. |
| Steam Locomotive Tanks |
| § 230.115 - Feed water tanks. |
| § 230.116 - Oil tanks. |
| Trucks, Frames and Equalizing System |
| § 230.106 - Steam locomotive frame. |
| § 230.107 - Tender frame and body. |
| § 230.108 - Steam locomotive leading and trailing trucks. |
| § 230.109 - Tender trucks. |
| § 230.110 - Pilots. |
| § 230.111 - Spring rigging. |
| Throttles and Reversing Gear |
| § 230.88 - Throttles. |
| § 230.89 - Reverse gear. |
| Driving Gear |
| § 230.93 - Pistons and piston rods. |
| § 230.94 - Crossheads. |
| § 230.95 - Guides. |
| § 230.96 - Main, side, and valve motion rods. |
| § 230.97 - Crank pins. |
| Ash Pans |
| § 230.69 - Ash pans. |
| Appendix A to Part 230 - Inspection Requirements |
| Appendix B to Part 230 - Diagrams and Drawings |
| Appendix C to Part 230 - FRA Inspection Forms |
| Appendix D to Part 230 - Civil Penalty Schedule |