 |
Code of Federal Regulations (Last Updated: July 5, 2024) |
 |
Title 49 - Transportation |
|
Subtitle B - Other Regulations Relating to Transportation |
|
Chapter I - Pipeline and Hazardous Materials Safety Administration, Department of Transportation |
|
Part 178 - Specifications for Packagings |
|
Subpart H - Specifications for Portable Tanks |
§ 178.255-14 - Marking.
Latest version.
-
§ 178.255-14 Marking.
(a) In addition to markings required by Section VIII of the ASME Code (IBR, see § 171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows:
Manufacturer's name ______________ Serial No.
DOT specification
Nominal capacity ______________ (gallons)
Tare weight ______________ (pounds)
Date of manufacture
(b) [Reserved]
[29 FR 18972, Dec. 29, 1964. Redesignated at 32 FR 5606, Apr. 5, 1967, and amended by Amdt. 178-67, 46 FR 49906, Oct. 8, 1981; 68 FR 75750, Dec. 31, 2003]