§ 431.323 - Materials incorporated by reference.

§ 431.323 Materials incorporated by reference.

Cross Reference

Link to an amendment published at 87 FR 37699, June 24, 2022.

(a) General. We incorporate Certain material is incorporated by reference the following standards into this subpart S of part 431. The material listed has been approved for incorporation by reference by with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Any subsequent amendment to a standard by the standard-setting organization will not affect the DOE regulations unless and until amended by DOE. Material is incorporated as it exists on the date of the approval and a notice of any change in the material will be published in the Federal Register. All approved To enforce any edition other than that specified in this section, the U.S. Department of Energy (DOE) must publish a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at DOE, and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Also, this material is available for inspection at Contact DOE at: the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, 6th Sixth Floor, 950 L'Enfant Plaza , SW., Washington, DC 20024, (202-) 586-29459127, between 9 aBuildings@ee.m. and 4 p.m., Monday through Friday, except Federal holidays, or go to: http://www1.eere.energy.gov/buildings/appliance_standards/. Standards can be obtained from the sources listed belowdoe.gov, https://www.energy.gov/eere/buildings/building-technologies-office. For information on the availability of this material at NARA, email: [e-mail], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. The material may be obtained from the sources in the following paragraphs of this section.

(b) ANSI. American National Standards Institute, 25 W. 43rd Street, 4th Floor, New York, NY 10036, ; 212-642-4900, or go to http://; www.ansi.org.

(1) ANSI C78.43-2004, Revision and consolidation of ANSI C78.1372-1997, .1374-1997, .1375-1997, .1376-1997, .1377-1997, .1378-1997, .1379-1997, .1382-1997, .1384-1997, and .1650-2003 (“ANSI C78.43”)2017, American National Standard for Electric Lamps - Single-Ended Metal Halide Lamps, approved December 21, 2017; IBR approved for § 431.324.

(2) ANSI C78.44-2016, American National Standard for

electric lamps: Single-

Electric Lamps - Double-Ended Metal Halide Lamps, approved

May 5, 2004,

July 1, 2016; IBR approved for § 431.

322;

324.

(

2

3) ANSI C82.6-

2005, Proposed Revision of ANSI C82.6-1985 (“ANSI C82.6”

2015 (R2020), American National Standard for Lamp Ballasts - Ballasts for High-Intensity Discharge Lamps - Methods of Measurement, approved

February 14, 2005,

March 30, 2020; IBR approved for

§

§§ 431.322;

and § 431.324.

(c)

431.324.

(4) ANSI C82.9-2016, American National Standard for Lamp Ballasts - High Intensity Discharge and Low-Pressure Sodium Lamps - Definitions, approved July 12, 2016; IBR approved for §§ 431.322; 431.324.

(c) IEC. International Electrotechnical Commission, 3 rue de Varembé, 1st Floor, P.O. Box 131, CH - 1211 Geneva 20 - Switzerland, [phone], or go to webstore.iec.ch/home.

(1) IEC 63103, Lighting Equipment - Non-active Mode Power Measurement, Edition 1.0, dated 2020-07; IBR approved for § 431.324.

(2) [Reserved]

(d) NFPA. National Fire Protection Association, 11 Tracy Drive, Avon, MA 02322, 1-800-344-3555, or go to http://www.nfpa.org;

(1) NFPA 70-2002 (“NFPA 70”), National Electrical Code 2002 Edition, IBR approved for § 431.326;

(2) [Reserved]

(e) UL. Underwriters Laboratories, Inc., COMM 2000, 1414 Brook Drive, Downers Grove, IL 60515, 1-888-853-3503, or go to http://www.ul.com.

(1) UL 1029 (ANSI/UL 1029-2007) (“UL 1029”), Standard for Safety High-Intensity-Discharge Lamp Ballasts, 5th edition, May 25, 1994, which consists of pages dated May 25, 1994, September 28, 1995, August 3, 1998, February 7, 2001 and December 11, 2007, IBR approved for § 431.326.

(2) [Reserved]

[74 FR 12075, Mar. 23, 2009, as amended at 75 FR 10966, Mar. 9, 2010; 87 FR 37699, June 24, 2022]