§ 431.443 - Materials incorporated by reference.

§ 431.443 Materials incorporated by reference.

Cross Reference

Link to an amendment published at 86 FR 23, Jan. 4, 2021.

Cross Reference

This amendment was delayed until Mar. 21, 2021, at 86 FR 7798, Feb. 2, 2021.

(a) General. The Department incorporates Certain material is incorporated by reference the following standards into subpart X of part 431 . The with the approval of the Director of the Federal Register has approved the material listed in paragraph (b) of this section for incorporation by reference in accordance with under 5 U.S.C. 552(a) and 1 CFR part 51. Any subsequent amendment to a standard by the standard-setting organization will not affect the DOE test procedures unless and until the DOE amends its test procedures. DOE incorporates the material Material is incorporated as it exists on the date of the approval, and a notice notification of any change in the material will be published in the Federal Register. Standards can be obtained from the sources below. All approved material is available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Also, this material is available for inspection at U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, Sixth Floor, 950 L'Enfant Plaza , SW., Washington, DC 20024, [phone], or go to http://www1.eere.energy.gov/buildings/appliance_standards/. Standards can be obtained from the sources below. It is also available at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email: [e-mail], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

(b) CAN/CSA. Canadian Standards Association, Sales Department, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, L4W 5N6, Canada, 1-800-463-6727, or go to http://www.shopcsa.ca/onlinestore/welcome.asp.

(1) CSA C747-09 (“CSA C747”), Energy efficiency test methods for small motors, October 2009, IBR approved for §§ 431.444; 431.447.

(2) CSA C390-10, Test methods, marking requirements, and energy efficiency levels for three-phase induction motors, March 2010, IBR approved for §§ 431.444; 431.447.

(c) IEC. International Electrotechnical Commission, 3 rue de Varembé, 1st Floor, P.O. Box 131, CH - 1211 Geneva 20 - Switzerland, [phone], or go to https://webstore.iec.ch/home.

(1) IEC 60034-1, Edition 12.0 2010-02, (“IEC 60034-1:2010”), Rotating electrical machines - Part 1: Rating and performance, IBR approved for §§ 431.444.

(2) IEC 60034-2-1:2014, Edition 2.0 2014-06, (“IEC 60034-2-1:2014”), Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles), IBR approved for §§ 431.444, and 431.447.

(3) IEC 60051-1:2016, Edition 6.0 2016-02, (“IEC 60051-1:2016), Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts, IBR approved for §§ 431.444.

(d) IEEE. Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331, 1-800-678-IEEE (4333), or go to http://www.ieee.org/web/publications/home/index.html.

(1) IEEE

Std

112

-2004,

^TM-2017 (“IEEE 112-2017”), IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, approved

February 9, 2004, IBR approved as follows: (i) Section 6.3, Efficiency Test Method A, Input-Output,

December 6, 2017, IBR approved for §§ 431.444

; 431.447; (ii) Section 6.4, Efficiency Test Method B, Input-Output with Loss Segregation, IBR approved for §§ 431.444; 431.

, and 431.447.

(2) IEEE Std 114-2010, Test Procedure for Single-Phase Induction Motors, approved September 30, 2010, IBR approved for §§ 431.444; 431.447.

(e) NEMA. National Electrical Manufacturers Association, 1300 North 17th Street, Suite 900, Arlington, Virginia 22209, [phone], or go to https://www.nema.org.

(1) NEMA MG 1-2016, American National Standard for Motors and Generators, ANSI approved June 1, 2018, IBR approved for § 431.442.

(2) [Reserved]

[74 FR 32072, July 7, 2009, as amended at 77 FR 26638, May 4, 2012; 86 FR 23, Jan. 4, 2021]