§ 431.63 - Materials incorporated by reference.

§ 431.63 Materials incorporated by reference.

Cross Reference

Link to an amendment published at 88 FR 66224, Sept. 26, 2023.

(a) General. We incorporate Certain material is incorporated by reference the following standards into this subpart C of part 431. The material listed has been approved for incorporation by reference by with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR 51. Any subsequent amendment to a standard by the standard-setting organization will not affect the DOE regulations unless and until amended by DOE. Material is incorporated as it exists on the date of the approval and a notice of any change in the material will be published in the Federal Register. All approved part 51. To enforce any edition other than that specified in this section, the DOE must publish a document in the Federal Register and the material must be available to the public. All approved incorporation by reference (IBR) material is available for inspection at DOE and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Also, this material is available for inspection at Contact DOE at: the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, 6th Floor, 950 L'Enfant Plaza, SW., 1000 Independence Avenue SW, EE–5B, Washington, DC 20024, 202–586–2945, or go to: http://www1.eere.(202)-586–9127, [e-mail], www.energy.gov/buildings/appliance_standards/. Standards can eere/buildings/building-technologies-office. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations.html or email: [e-mail]. The material may be obtained from the sources listed below. in the following paragraphs of this section:

(b) ANSI. American National Standards Institute, 25 W. 43rd Street, 4th Floor, New York, NY 10036, 212–642–4900, or go to http://www.ansi.org:

(1) ANSI /AHAM HRF–1–2004, Energy, Performance and Capacity of Household Refrigerators, Refrigerator-Freezers and Freezers, approved July 7, 2004, IBR approved for § 431.64 and appendices A and B to subpart C to part 431.

(2) AHAM HRF–1–2008 (“HRF–1–2008”), Association of Home Appliance Manufacturers, Energy and Internal Volume of Refrigerating Appliances (2008) including Errata to Energy and Internal Volume of Refrigerating Appliances, Correction Sheet issued November 17, 2009, IBR approved for § 431.64 and appendices A and B to subpart C to part 431.

(c) AHRI. Air-Conditioning, Heating, and Refrigeration Institute, 2111 Wilson Blvd., Suite 500, Arlington, VA 22201, ; (703) 524–8800, ; [e-mail], or http://; www.ahrinet.org/Content/StandardsProgram_20.aspx.

(1) ARI Standard 1200–2006, Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets, 2006, ; IBR approved for §§ § 431.64 and 431.66, and appendices A and B to subpart C of part 431.

(2) AHRI Standard 1200 (I–P)–2010 (“AHRI Standard 1200 (I–P)–2010”), 2010 Standard for Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets, 2010, ; IBR approved for §§ § 431.64 and 431.66, and appendices A and B to subpart C of part 43166.

(3) AHRI Standard 1200–2023 (I–P) (“AHRI 1200–2023”), 2023 Standard for Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets, copyright 2023; IBR approved for appendices B, C, and D to this subpart.

(4) AHRI Standard 1320–2011 (I–P), (“AHRI 1320–2011”) 2011 Standard for Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets for Use With Secondary Refrigerants, copyright 2011; IBR approved for appendix B to this subpart.

(d) ASHRAE. The American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc., 1971 Tullie Circle NE., Atlanta, GA 30329, or http://; (404) 636–8400; [e-mail]; www.ashrae.org/.

(1) ANSI/ASHRAE Standard 72–2005, 72–2022 (ASHRAE 72–200572–2022), “Method Method of Testing Open and Closed Commercial Refrigerators and Freezers,” Copyright 2005, approved June 30, 2022; IBR approved for § 431.62, and appendices A and B to subpart C of part 431.

(2) [Reserved]

(

appendices B, C, and D to this subpart.

(2) Errata sheet for ANSI/ASHRAE Standard 72–2022 (ASHRAE 72–2022 Errata), Method of Testing Open and Closed Commercial Refrigerators and Freezers, November 11, 2022; IBR approved for appendices B, C, and D to this subpart.

(e) ASTM. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428, ; (877) 909–2786, or go to http://; www.astm.org/.

(1) ASTM E 1084 E1084–86 (Reapproved 2009), “Standard Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight,” approved April 1, 2009, ; IBR approved for § 431.62.

(2) [Reserved]

[

ASTM F2143–16, Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables, approved May 1, 2016; IBR approved for appendix C to this subpart.

[74 FR 1139, Jan. 9, 2009, as amended at 77 FR 10318, Feb. 21, 2012; 78 FR 62993, Oct. 23, 2013; 79 FR 22308, Apr. 21, 2014; 88 FR 66224, Sept. 26, 2023]