Code of Federal Regulations (Last Updated: April 5, 2024) |
Title 14 - Aeronautics and Space |
Chapter I - Federal Aviation Administration, Department of Transportation |
SubChapter C - Aircraft |
Part 21 - Certification Procedures for Products and Articles |
Subpart K - Parts Manufacturer Approvals |
§ 21.310 - Inspections and tests.
Latest version.
-
§ 21.310 Inspections and tests.
(a) Each applicant for or holder of a PMA must allow the FAA to inspect its quality system, facilities, technical data, and any manufactured articles and witness any tests, including any inspections or tests at a supplier facility, necessary to determine compliance with this subchapter.
(b) Unless otherwise authorized by the FAA, the applicant or holder -
(1) May not present any article to the FAA for an inspection or test unless compliance with § 21.303(b)(2) through (4) has been shown for that article; and
(2) May not make any change to an article between the time that compliance with § 21.303(b)(2) through (4) is shown for that article and the time that the article is presented to the FAA for the inspection or test.