§ 36.6 - Incorporation by reference.

§ 36.6 Incorporation by reference.

(a) General. This part prescribes certain standards and procedures which are not set forth in full text in the rule. Those standards and procedures are contained in published material which is reasonably available to the class of persons affected and has been approved for incorporation by reference by the Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR Part 51.

(b) Incorporated matter.

(1) Each publication, or part of a publication, which is referenced but not set forth in full-text in this part and which is identified in paragraph (c) of this section is hereby incorporated by reference and made a part of part 36 of this chapter with the approval of the Director of the Federal Register.

(2) Incorporated matter which is subject to subsequent change is incorporated by reference according to the specific reference and to the identification statement. Adoption of any subsequent change in incorporated matter is made under Part 11 of this chapter and 1 CFR Part 51.

(c) Identification statement. The complete title or description which identifies each published matter incorporated by reference in this part is as follows:

(1) International Electrotechnical Commission (IEC) Publications.

(i) IEC Publication No. 179, entitled “Precision Sound Level Meters,” dated 1973.

(ii) IEC Publication No. 225, entitled “Octave, Half-Octave, Third Octave Band Filters Intended for the Analysis of Sounds and Vibrations,” dated 1966.

(iii) IEC Publication No. 651, entitled “Sound Level Meters,” first edition, dated 1979.

(iv) IEC Publication No. 561, entitled “Electro-acoustical Measuring Equipment for Aircraft Noise Certification,” first edition, dated 1976.

(v) IEC Publication No. 804, entitled “Integrating-averaging Sound Level Meters,” first edition, dated 1985.

(vi) IEC Publication 61094-3, entitled “Measurement Microphones - Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique”, edition 1.0, dated 1995.

(vii) IEC Publication 61094-4, entitled “Measurement Microphones - Part 4: Specifications for Working Standard Microphones”, edition 1.0, dated 1995.

(viii) IEC Publication 61260, entitled “Electroacoustics-Octave-Band and Fractional-Octave-Band filters”, edition 1.0, dated 1995.

(ix) IEC Publication 61265, entitled “Instruments for Measurement of Aircraft Noise-Performance Requirements for Systems to Measure One-Third-Octave-Band Sound pressure Levels in Noise Certification of Transport-Category Aeroplanes,” edition 1.0, dated 1995.

(x) IEC Publication 60942, entitled “Electroacoustics - Sound Calibrators,” edition 2.0, dated 1997.

(2) Society of Automotive Engineers (SAE) Publications.

(i) SAE ARP 866A, entitled “Standard Values at Atmospheric Absorption as a Function of Temperature and Humidity for Use in Evaluating Aircraft Flyover Noise,” dated March 15, 1975.

(3) International Standards and Recommended Practices entitled “Environmental Protection, Annex 16 to the Convention on International Civil Aviation, Volume I, Aircraft Noise”, Third Edition, July 1993, Amendment 7, effective March 21, 2002.

(d) Availability for purchase. Published material incorporated by reference in this part may be purchased at the price established by the publisher or distributor at the following mailing addresses:

(1) IEC publications.

(i) International Electrotechnical Commission, 3, rue de Varembe, Case postale 131, 1211 Geneva 20, Switzerland.

(ii) American National Standard Institute, 11 West 42nd Street, New York City, New York 10036.

(2) SAE publications. Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrentown, Pennsylvania 15096.

(3) ICAO publications. International Civil Aviation Organization (ICAO), Document Sales Unit, 999 University Street, Montreal, Quebec H3C 5H7, Canada.

(e) Availability for inspection. A copy of each publication incorporated by reference in this part is available for public inspection at the following locations:

(1)

part 51. All approved material is available for inspection at the locations in this paragraph (a) and may be obtained from the sources detailed in paragraphs (a)(1) through (12) of this section.

(1) The U.S. Department of Transportation, Docket Operations, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue

,

SE., Washington, DC 20590.

(2)

The National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (3) The respective Region Headquarters of the

Federal Aviation Administration

as follows: (i)

New England

Region

Regional Headquarters, 12 New England Executive Park, Burlington,

Massachusetts 01803

MA 01801.

(

ii

3) Federal Aviation Administration Eastern Region Headquarters, Federal Building, John F. Kennedy

(JFK)

International Airport, Jamaica,

New York

NY 11430.

(

iii

4) Federal Aviation Administration Southern Region Headquarters, 1701 Columbia Avenue, College Park,

Georgia,

GA 30337.

(

iv

5) Federal Aviation Administration Great Lakes Region Headquarters, O'Hare Lake Office Center, 2300 East Devon Avenue, Des Plaines,

Illinois

IL 60018.

(

v

6) Federal Aviation Administration Central Region Headquarters, Federal Building, 601 East 12th Street,

Kanasa

Kansas City

Missouri

, MO 64106.

(

vi

7) Federal Aviation Administration Southwest Region Headquarters, 2601 Meacham Boulevard, Fort Worth,

Texas,

TX 76137

-4298

.

(

vii

8) Federal Aviation Administration Northwest Mountain Region Headquarters, 1601 Lind Avenue SW,

Southwest,

Renton,

Washington

WA 98055.

(

viii

9) Federal Aviation Administration Western

-

Pacific Region Headquarters, 15000 Aviation Boulevard, Hawthorne,

California

CA 92007.

(

ix

10) Federal Aviation Administration Alaskan Region Headquarters, 222 West 7th Avenue, #14, Anchorage,

Alaska,

AK 99513.

(

x

11) Federal Aviation Administration European Office Headquarters, 15

,

Rue de la Loi

(3rd

, Third Floor

)

, B-1040, Brussels, Belgium.

[Amdt. 36-9, 43 FR 8739, Mar. 3, 1978, as amended by Amdt. 36-16, 53 FR 47400, Nov. 22, 1988; Amdt. 36-20, 57 FR 42854, Sept. 16, 1992; Amdt. 36-54, 67 FR 45212, July 8, 2002; Amdt. 36-24, 28 FR 1512, Jan. 10, 2003; 68 FR 2402, Jan. 16, 2003; Amdt. 36-26, 70 FR 38748, July 5, 2005; 72 FR 68475, Dec. 5, 2007

(12) The National Archives and Records Administration (NARA). For information on the availability of this information at NARA, call 202-741-6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

(b) International Civil Aviation Organization (ICAO), Document Sales Unit, 999 University Street, Montreal, Quebec, H3C 5H7, Canada. http://www.icao.int/publications/Pages/default.aspx.

(1) International Standards and Recommended Practices, Annex 16 to the Convention on International Civil Aviation, Environmental Protection, Volume I, Aircraft Noise, Third Edition, July 1993, Amendment 7 effective March 21, 2002, IBR approved for § 36.1(f), and appendices A and B to part 36.

(2) International Standards and Recommended Practices, Annex 16 to the Convention on International Civil Aviation, Environmental Protection, Volume I, Aircraft Noise, Seventh Edition, July 2014, Amendment 11-B, applicable January 1, 2015, IBR approved for § 36.1(f) and appendices A and B to part 36.

(c) International Electrotechnical Commission (IEC) 3 Rue de Varembe, Case Postale 131, 1211 Geneva 20, Switzerland, http://www.iec.ch/standardsdev/publications/?ref=menu.

(1) Publication No. 179, Precision Level Sound Meters, (IEC 179) 1973, IBR approved for appendix F to part 36.

(2) Publication No. 561, Electro-acoustical Measuring Equipment for Aircraft Noise Certification, first edition, 1976, (IEC 561), IBR approved for appendices G and J to part 36.

(3) Publication No. 651, Sound Level Meters, first edition, 1979, (IEC 651), IBR approved for appendices G and J to part 36.

(4) Publication No. 804, Integrating-averaging Sound Level Meters, first edition, 1985, (IEC 804), IBR approved for appendix J to part 36.

(5) Publication No. 61094-3, Measurement Microphones - Part 3: Primary Method for Free-Field Calibration of Laboratory Standard Microphones by the Reciprocity Technique, edition 1.0, 1995 (IEC 61094-3) IBR approved for appendix A to part 36.

(6) Publication No. 61094-4, Measurement Microphones - Part 4: Specifications for Working Standard Microphones, edition 1.0, 1995, (IEC 61094-4) IBR approved for appendix A to part 36.

(7) Publication No. 61260, Electroacoustics-Octave-Band and Fractional-Octave-Band Filters, edition 1.0, 1995, (IEC 61260), IBR approved for appendix A to part 36.

(8) Publication No, 60942, Electroacoustics-Sound Calibrators, edition 2.0, 1997, (IEC 60942) IBR approved for appendix A to part 36.

(d) Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrentown, PA 15096, http://www.sae.org/pubs/.

(1) ARP 866A, Standard Values at Atmospheric Absorption as a Function of Temperature and Humidity for use in Evaluating Aircraft Flyover Noise, March 15, 1975, IBR approved for appendix H to part 36.

(2) [Reserved]

[Doc. No. FAA-2015-3782, Amdt. No. 36-31, 82 FR 46129, Oct. 4, 2017]