 |
Code of Federal Regulations (Last Updated: April 5, 2024) |
 |
Title 16 - Commercial Practices |
|
Chapter II - Consumer Product Safety Commission |
|
SubChapter B - Consumer Product Safety Act Regulations |
|
Part 1220 - Safety Standard for Non-Full-Size Baby Cribs |
§ 1220.2 - Requirements for non-full-size baby cribs.
-
§ 1220.2 Requirements for non-full-size baby cribs.
(a) Except as provided in paragraph (b) of this section, each non-full-size baby crib shall comply with all applicable provisions of ASTM F406–19F406–22, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards, approved March 15, 2019on October 1, 2022. The Director of the Federal Register approves the this incorporation by reference listed in this section in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy of this ASTM standard from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959; www.astm.org. You may inspect a copy at the Division of the SecretariatThis material is available for inspection at the U.S. Consumer Product Safety Commission and at the National Archives and Records Administration (NARA). Contact the U.S. Consumer Product Safety Commission at: the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 820, 4330 East-West Highway, Bethesda, MD 20814, telephone 301–504–7923, or at the National Archives and Records Administration (NARA). (301) 504–7479, email: cpsc-os@cpsc.gov. For information on the availability of this material at NARA, email fedregfr.legal@narainspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. A free, read-only copy of the standard is available for viewing on the ASTM website at https://www.astm.org/READINGLIBRARY/. You may also obtain a copy from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428–2959; phone: (610) 832–9585; www.astm.org.
(b) Comply with the ASTM F406–19 F406–22 standard with the following exclusions:
(1) Do not comply with sections 5.6.2 through 5.6.2.4 of ASTM F406–19F406–22.
(2) Do not comply with section 5.16.2 through 5.16.2.2 of ASTM F406–19F406–22.
(3) Do not comply with sections 5.19 through 5.19.2.2 of ASTM F406–19F406–22.
(4) Do not comply with section 7, Performance Requirements for Mesh/Fabric Products, of ASTM F406–19F406–22.
(5) Do not comply with sections 8.11 through 8.11.2.4 of ASTM F406–19F406–22.
(6) Do not comply with sections 8.12 through 8.12.2.2 of ASTM F406–19F406–22.
(7) Do not comply with sections 8.14 through 8.14.2 of ASTM F406–19F406–22.
(8) Do not comply with sections 8.15 through 8.15.3.3 of ASTM F406–19F406–22.
(9) Do not comply with section 8.16 through 8.16.3 of ASTM F406–19F406–22.
(10) Do not comply with sections 8.28 through 8.28.3.2 of ASTM F406–19F406–22.
(11) Do not comply with sections 8.29 through 8.29.3 of ASTM F406–19F406–22.
(12) Do not comply with sections 8.30 through 8.30.5 of ASTM F406–19F406–22.
(13) Do not comply with sections 8.31 through 8.31.9 of ASTM F406–19F406–22.
(14) Do not comply with sections 9.3.2 through 9.3.2.4 of ASTM F406–19F406–22.