§ 1221.2 - Requirements for play yards.

§ 1221.2 Requirements for play yards.

Cross Reference

Link to an amendment published at 84 FR 56689, Oct. 23, 2019.

(a) Except as provided in paragraph (b) of this section, each play yard must comply with all applicable provisions of ASTM F406-1319, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards, approved on May 1March 15, 20132019. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR Part part 51. You may obtain a copy of this ASTM standard from ASTM International, 100 Bar Barr Harbor Drive, P.O. Box 0700PO Box C700, West Conshohocken, PA 19428-2959; http://www.astm.org. You may inspect a copy at the Office Division of the SecretarySecretariat, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone [phone], or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030email [e-mail], or go to: http://www.archives.gov/federal_-register/code_of_federal_regulationscfr/ibr_-locations.html.

(b) Comply with the ASTM F406-13 19 standard with the following exclusions:

(1) Do not comply with section 5.17 of ASTM F406-1319.

(2) Do not comply with section 5.20 of ASTM F406-1319.

(3) Do not comply with section 6, Performance Requirements for Rigid - Sided Products, of ASTM F406-13, in its entirety19.

(4) Do not comply with sections 8.1 through 8.10.5 of ASTM F406-1319.

(5) Instead of complying with section 9.4.2.10 of ASTM F406-1319, comply only with the following:

(i) 9.4.2.10 For products that have a separate mattress that is not permanently fixed in place: Use ONLY mattress/pad provided by manufacturer.

(ii) [Reserved]

(6) Do not comply with section 10.1.1.1 of ASTM F406-1319.

[78 84 FR 5033556689, AugOct. 1923, 20132019]