![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 16 - Commercial Practices |
![]() |
Chapter II - Consumer Product Safety Commission |
![]() |
SubChapter C - Federal Hazardous Substances Act Regulations |
![]() |
Part 1512 - Requirements for Bicycles |
Subpart A - Regulations |
§ 1512.1 - Scope. |
§ 1512.2 - Definitions. |
§ 1512.3 - Requirements in general. |
§ 1512.4 - Mechanical requirements. |
§ 1512.5 - Requirements for braking system. |
§ 1512.6 - Requirements for steering system. |
§ 1512.7 - Requirements for pedals. |
§ 1512.8 - Requirements for drive chain. |
§ 1512.9 - Requirements for protective guards. |
§ 1512.10 - Requirements for tires. |
§ 1512.11 - Requirements for wheels. |
§ 1512.12 - Requirements for wheel hubs. |
§ 1512.13 - Requirements for front fork. |
§ 1512.14 - Requirements for fork and frame assembly. |
§ 1512.15 - Requirements for seat. |
§ 1512.16 - Requirements for reflectors. |
§ 1512.17 - Other requirements. |
§ 1512.18 - Tests and test procedures. |
§ 1512.19 - Instructions and labeling. |
§ 1512.20 - Separability. |
Subpart B - Policies and Interpretations |
Table 1 to Part 1512 - Minimum Candlepower per Incident Foot-Candle for Clear Reflector |
Table 2 to Part 1512 - Minimum Candlepower per Incident Foot-Candle for Clear Reflector |
Table 3 to Part 1512 - Minimum Acceptable Values for the Quantity A Defined in the Retroreflective Tire and Rim Test Procedure |
Table 4 to Part 1512 - Relative Energy Distribution of Sources |
Figure 1 to Part 1512 - Bicycle Front Fork Cantilever Bending Test Rig |
Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension |
Figure 8 to Part 1512 - Reflectorized Bicycle Wheel Rim Abrasion Test Device |
Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles |
Figures 6 and 7 to Part 1512 - Toe Clearance and Chain Guard Requirements |