§ 436.364 - Atomic absorption test for sodium carbonate content of cefmenoxime hydrochloride for injection.

(a) Apparatus. A suitable atomic absorbance spectrophotometer equipped with:

(1) A suitable sodium hollow-cathode discharge lamp;

(2) An oxidizing air-acetylene flame;

(3) A nebulizer-burner system;

(4) An optical dispersing device capable of isolating a resonance line of sodium from other wavelengths produced by the emission source; and

(5) A suitable radiation detector.

(b) Reagents. Ionization buffer: Dissolve 19.07 grams of potassium chloride in distilled water and dilute to 1,000 milliliters.

(c) Preparation of reference standard and sample solutions—(1) Reference standard solution. Accurately weigh approximately 140 milligrams of sodium chloride which has been previously dired for 40 to 50 minutes at a temperature of 500 to 650 ° C. Dissolve and dilute with sufficient distilled water to obtain a stock solution containing 5.5 micrograms of sodium per milliliter. Mix 10 milliliters of the stock solution with 10 milliliters of ionization buffer and dilute the mixture with distilled water to obtain a solution containing 0.55 microgram of sodium per milliliter.

(2) Sample solution. Dilute the sample solution used in § 442.222(b)(1)(ii)(B)(1) of this chapter, with sufficient distilled water to obtain a stock solution containing 5.5 micrograms of sodium per milliliter (estimated). Mix 10 milliliters of the stock solution with 10 milliliters of ionization buffer and dilute the mixture with distilled water to obtain a solution containing 0.55 microgram of sodium per milliliter (estimated).

(3) Procedure. Determine the atomic absorbance of the reference standard and sample solutions at a wavelength of 589 nanometers, using the atomic absorbance spectrophotometer and a reagent blank prepared by diluting 10 milliliters of ionization buffer to 100 milliliters with distilled water.

(d) Calculations. Calculate the percent sodium carbonate as follows:

ER01JA93.096