§ 200.925b - Residential and institutional building code comparison items.  


Latest version.
  • HUD will review each local code submitted under this chapter to determine whether it regulates all of the following areas and subareas:

    (a) Fire safety. (1) Construction types permitted;

    (2) Allowable height and area;

    (3) Fire separations;

    (4) Fire resistance requirements;

    (5) Means of egress (number and distance);

    (6) Individual unit smoke detectors;

    (7) Building alarm systems;

    (8) Highrise criteria;

    (b) Light and ventilation. (1) Habitable rooms;

    (2) Bath and toilet rooms.

    (c) Structural loads and seismic design. (1) Design live loads;

    (2) Design dead loads;

    (3) Snow loads;

    (4) Wind loads.

    (5) Earthquake loads (in localities identified by ASCE 7-88 (formerly ANSI A58.1-82) as being in seismic zones 1, 2, 3, or 4, and Guam).

    (6) Special loads, i.e., soil pressure, railings, interior walls etc.

    (d) Foundation systems. (1) Soil tests;

    (2) Foundation depths;

    (3) Footings;

    (4) Foundation materials criteria;

    (5) Piles, i.e., materials, allowable stresses, design;

    (6) Excavation;

    (e) Materials standards.

    (f) Construction components. (1) Steel;

    (2) Masonry;

    (3) Concrete;

    (4) Gypsum;

    (5) Lumber;

    (6) Roof construction and covering;

    (7) Chimneys and fireplaces.

    (g) Glass. (1) Thickness/area requirements;

    (2) Safety glazing.

    (h) Mechanical. (1) Heating, cooling and ventilation systems;

    (2) Boilers and pressure vessels;

    (3) Gas, liquid and solid fuel piping and equipment;

    (4) Chimneys and vents;

    (5) Ventilation (air changes).

    (i) Plumbing. (1) Materials standards;

    (2) Sizing and installing drainage systems;

    (3) Vents and venting;

    (4) Traps;

    (5) Cleanouts;

    (6) Plumbing fixtures;

    (7) Water supply and distribution;

    (8) Storm drain systems.

    (j) Electrical. (1) Wiring design and protection;

    (2) Wiring methods and materials;

    (3) Equipment for general use;

    (4) Special equipment;

    (5) Special conditions;

    (6) Communication systems.

    (k) Elevators. (1) Reference ASME/ANSI Standard A 17.1-1987; and the ASME/ANSI A17.1b-1989 Addenda.

    (2) Acceptance tests and periodic tests.

    [49 FR 18696, May 1, 1984, as amended at 51 FR 28699, Aug. 11, 1986; 58 FR 60248, Nov. 15, 1993; 59 FR 36695, July 19, 1994]