Part 1910 - OCCUPATIONAL SAFETY AND HEALTH STANDARDS  


Subparts U–Y [Reserved]
Subparts U-Y [Reserved]
§§ 1910.901-1910.999 [Reserved]
Subpart A — General
§ 1910.1 Purpose and scope.
§ 1910.2 Definitions.
§ 1910.3 Petitions for the issuance, amendment, or repeal of a standard.
§ 1910.4 Amendments to this part.
§ 1910.5 Applicability of standards.
§ 1910.6 Incorporation by reference.
§ 1910.7 Definition and requirements for a nationally recognized testing laboratory.
§ 1910.8 OMB control numbers under the Paperwork Reduction Act.
§ 1910.9 Compliance duties owed to each employee.
Subpart B — Adoption and Extension of Established Federal Standards
§ 1910.11 Scope and purpose.
§ 1910.12 Construction work.
§ 1910.15 Shipyard employment.
§ 1910.16 Longshoring and marine terminals.
§ 1910.17 Effective dates.
§ 1910.18 Changes in established Federal standards.
§ 1910.19 Special provisions for air contaminants.
Subpart C [Reserved]
Subpart D — Walking-Working Surfaces
§ 1910.21 Scope and definitions.
§ 1910.22 General requirements.
§ 1910.23 Ladders.
§ 1910.24 Step bolts and manhole steps.
§ 1910.25 Stairways.
§ 1910.26 Dockboards.
§ 1910.27 Scaffolds and rope descent systems.
§ 1910.28 Duty to have fall protection and falling object protection.
§ 1910.29 Fall protection systems and falling object protection—criteria and practices.
§ 1910.30 Training requirements.
Subpart E — Exit Routes and Emergency Planning
§ 1910.33 Table of contents.
§ 1910.34 Coverage and definitions.
§ 1910.35 Compliance with alternate exit-route codes.
§ 1910.36 Design and construction requirements for exit routes.
§ 1910.37 Maintenance, safeguards, and operational features for exit routes.
§ 1910.38 Emergency action plans.
§ 1910.39 Fire prevention plans.
Appendix to Subpart E of Part 1910—Exit Routes, Emergency Action Plans, and Fire Prevention Plans
Subpart F — Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms
§ 1910.66 Powered platforms for building maintenance.
§ 1910.67 Vehicle-mounted elevating and rotating work platforms.
§ 1910.68 Manlifts.
Subpart G — Occupational Health and Environmental Control
§ 1910.94 Ventilation.
§ 1910.95 Occupational noise exposure.
§ 1910.97 Nonionizing radiation.
§ 1910.98 Effective dates.
Subpart H — Hazardous Materials
§ 1910.101 Compressed gases (general requirements).
§ 1910.102 Acetylene.
§ 1910.103 Hydrogen.
§ 1910.104 Oxygen.
§ 1910.105 Nitrous oxide.
§ 1910.106 Flammable liquids.
§ 1910.107 Spray finishing using flammable and combustible materials.
§ 1910.108 [Reserved]
§ 1910.109 Explosives and blasting agents.
§ 1910.110 Storage and handling of liquefied petroleum gases.
§ 1910.111 Storage and handling of anhydrous ammonia.
§§ 1910.112-1910.113 [Reserved]
§ 1910.119 Process safety management of highly hazardous chemicals.
§ 1910.120 Hazardous waste operations and emergency response.
§ 1910.121 [Reserved]
§ 1910.122 Table of contents.
§ 1910.123 Dipping and coating operations: Coverage and definitions.
§ 1910.124 General requirements for dipping and coating operations.
§ 1910.125 Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C).
§ 1910.126 Additional requirements for special dipping and coating operations.
Subpart I — Personal Protective Equipment
§ 1910.132 General requirements.
§ 1910.133 Eye and face protection.
§ 1910.134 Respiratory protection.
§ 1910.135 Head protection.
§ 1910.136 Foot protection.
§ 1910.137 Electrical protective equipment.
§ 1910.138 Hand protection.
§ 1910.139 [Reserved]
§ 1910.140 Personal fall protection systems.
Appendix A to Subpart I of Part 1910—References for Further Information (Non-mandatory)
Appendix B to Subpart I of Part 1910—Nonmandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection
Appendix C to Subpart I of Part 1910—Personal Fall Protection Systems Non-Mandatory Guidelines
Appendix D to Subpart I of Part 1910—Test Methods and Procedures for Personal Fall Protection Systems Non-Mandatory Guidelines
Subpart J — General Environmental Controls
§ 1910.141 Sanitation.
§ 1910.142 Temporary labor camps.
§ 1910.143 Nonwater carriage disposal systems. [Reserved]
§ 1910.144 Safety color code for marking physical hazards.
§ 1910.145 Specifications for accident prevention signs and tags.
§ 1910.146 Permit-required confined spaces.
§ 1910.147 The control of hazardous energy (lockout/tagout).
Subpart K — Medical and First Aid
§ 1910.151 Medical services and first aid.
§ 1910.152 [Reserved]
Subpart L — Fire Protection
§ 1910.155 Scope, application and definitions applicable to this subpart.
§ 1910.156 Fire brigades.
§ 1910.157 Portable fire extinguishers.
§ 1910.158 Standpipe and hose systems.
§ 1910.159 Automatic sprinkler systems.
§ 1910.160 Fixed extinguishing systems, general.
§ 1910.161 Fixed extinguishing systems, dry chemical.
§ 1910.162 Fixed extinguishing systems, gaseous agent.
§ 1910.163 Fixed extinguishing systems, water spray and foam.
§ 1910.164 Fire detection systems.
§ 1910.165 Employee alarm systems.
Appendixes to Subpart L of Part 1910—Note
Appendix A to Subpart L of Part 1910—Fire Protection
Appendix B to Subpart L of Part 1910—National Consensus Standards
Appendix C to Subpart L of Part 1910—Fire Protection References For Further Information
Appendix E to Subpart L of Part 1910—Test Methods for Protective Clothing
Subpart M — Compressed Gas and Compressed Air Equipment
§§ 1910.166-1910.168 [Reserved]
§ 1910.169 Air receivers.
Subpart N — Materials Handling and Storage
§ 1910.176 Handling materials — general.
§ 1910.177 Servicing multi-piece and single piece rim wheels.
§ 1910.178 Powered industrial trucks.
§ 1910.179 Overhead and gantry cranes.
§ 1910.180 Crawler locomotive and truck cranes.
§ 1910.181 Derricks.
§ 1910.183 Helicopters.
§ 1910.184 Slings.
Subpart O — Machinery and Machine Guarding
§ 1910.211 Definitions.
§ 1910.212 General requirements for all machines.
§ 1910.213 Woodworking machinery requirements.
§ 1910.214 Cooperage machinery. [Reserved]
§ 1910.215 Abrasive wheel machinery.
§ 1910.216 Mills and calenders in the rubber and plastics industries.
§ 1910.217 Mechanical power presses.
§ 1910.218 Forging machines.
§ 1910.219 Mechanical power-transmission apparatus.
Subpart P — Hand and Portable Powered Tools and Other Hand-Held Equipment
§ 1910.241 Definitions.
§ 1910.242 Hand and portable powered tools and equipment, general.
§ 1910.243 Guarding of portable powered tools.
§ 1910.244 Other portable tools and equipment.
Subpart Q — Welding, Cutting and Brazing
§ 1910.251 Definitions.
§ 1910.252 General requirements.
§ 1910.253 Oxygen-fuel gas welding and cutting.
§ 1910.254 Arc welding and cutting.
§ 1910.255 Resistance welding.
Subpart R — Special Industries
§ 1910.261 Pulp, paper, and paperboard mills.
§ 1910.262 Textiles.
§ 1910.263 Bakery equipment.
§ 1910.264 Laundry machinery and operations.
§ 1910.265 Sawmills.
§ 1910.266 Logging operations.
§ 1910.268 Telecommunications.
§ 1910.269 Electric power generation, transmission, and distribution.
§ 1910.272 Grain handling facilities.
Subpart S — Electrical
§ 1910.301 Introduction.
§ 1910.302 Electric utilization systems.
§ 1910.303 General.
§ 1910.304 Wiring design and protection.
§ 1910.305 Wiring methods, components, and equipment for general use.
§ 1910.306 Specific purpose equipment and installations.
§ 1910.307 Hazardous (classified) locations.
§ 1910.308 Special systems.
§§ 1910.309-1910.330 [Reserved]
§ 1910.331 Scope.
§ 1910.332 Training.
§ 1910.333 Selection and use of work practices.
§ 1910.334 Use of equipment.
§ 1910.335 Safeguards for personnel protection.
§§ 1910.336-1910.360 [Reserved]
§§ 1910.361-1910.380 [Reserved]
§§ 1910.381-1910.398 [Reserved]
§ 1910.399 Definitions applicable to this subpart.
Appendix A to Subpart S of Part 1910— References for Further Information
Subpart T — Commercial Diving Operations
§ 1910.401 Scope and application.
§ 1910.402 Definitions.
§ 1910.410 Qualifications of dive team.
§ 1910.420 Safe practices manual.
§ 1910.421 Pre-dive procedures.
§ 1910.422 Procedures during dive.
§ 1910.423 Post-dive procedures.
§ 1910.424 SCUBA diving.
§ 1910.425 Surface-supplied air diving.
§ 1910.426 Mixed-gas diving.
§ 1910.427 Liveboating.
§ 1910.430 Equipment.
§ 1910.440 Recordkeeping requirements.
Appendix B to Subpart T of Part 1910—Guidelines for Scientific Diving
Subpart Z — Toxic and Hazardous Substances
§ 1910.1000 Air contaminants.
§ 1910.1001 Asbestos.
§ 1910.1002 Coal tar pitch volatiles; interpretation of term.
§ 1910.1003 13 Carcinogens (4-Nitrobiphenyl, etc.).
§ 1910.1004 alpha-Naphthylamine.
§ 1910.1005 [Reserved]
§ 1910.1006 Methyl chloromethyl ether.
§ 1910.1007 3,'-Dichlorobenzidine (and its salts).
§ 1910.1008 bis-Chloromethyl ether.
§ 1910.1009 beta-Naphthylamine.
§ 1910.1010 Benzidine.
§ 1910.1011 4-Aminodiphenyl.
§ 1910.1012 Ethyleneimine.
§ 1910.1013 beta-Propiolactone.
§ 1910.1014 2-Acetylaminofluorene.
§ 1910.1015 4-Dimethylaminoazobenzene.
§ 1910.1016 N-Nitrosodimethylamine.
§ 1910.1017 Vinyl chloride.
§ 1910.1018 Inorganic arsenic.
§ 1910.1020 Access to employee exposure and medical records.
§ 1910.1024 Beryllium.
§ 1910.1025 Lead.
§ 1910.1026 Chromium (VI).
§ 1910.1027 Cadmium.
§ 1910.1028 Benzene.
§ 1910.1029 Coke oven emissions.
§ 1910.1030 Bloodborne pathogens.
§ 1910.1043 Cotton dust.
§ 1910.1044 1,2-dibromo-3-chloropropane.
§ 1910.1045 Acrylonitrile.
§ 1910.1047 Ethylene oxide.
§ 1910.1048 Formaldehyde.
§ 1910.1050 Methylenedianiline.
§ 1910.1051 1,3-Butadiene. =
§ 1910.1052 Methylene Chloride.
§ 1910.1053 Respirable crystalline silica.
§ 1910.1096 Ionizing radiation.
§ 1910.1200 Hazard communication.
§ 1910.1201 Retention of DOT markings, placards and labels.
§ 1910.1450 Occupational exposure to hazardous chemicals in laboratories.
§§ 1910.1451-1910.1499 [Reserved]
Appendix A to §1910.1024—Operations for Establishing Beryllium Work Areas

Source

39 FR 23502, June 27, 1974, unless otherwise noted.