 |
Code of Federal Regulations (Last Updated: May 6, 2024) |
 |
Title 30 - Mineral Resources |
|
Chapter I - Mine Safety and Health Administration, Department of Labor |
|
SubChapter B - Testing, Evaluation, and Approval of Mining Products |
|
Part 18 - Electric Motor-Driven Mine Equipment and Accessories |
|
Subpart A - General Provisions |
§ 18.13 - Certification plate.
Latest version.
-
§ 18.13 Certification plate.
Each certified component shall be identified by a certification plate attached to the component in a manner acceptable to MSHA. The method of attachment shall not impair any explosion-proof characteristics of the component. The plate shall be of serviceable material, acceptable, to MSHA, and shall contain the following:
Certified as complying with the applicable requirements of 30 CFR part ________.
Certification No.________.
The blank spaces shall be filled with appropriate designations. Inclusion of the information on a company name plate will be permitted provided the plate is made of material acceptable to MSHA.