 |
Code of Federal Regulations (Last Updated: July 5, 2024) |
 |
Title 30 - Mineral Resources |
|
|
Chapter II - Bureau of Safety and Environmental Enforcement, Department of the Interior |
|
|
SubChapter B - Offshore |
|
|
Part 285 - [Reserved] |
|
|
Subpart G - Facility Design, Fabrication, and Installation |
| Reports |
| § 285.700 - What reports must I submit to BSEE before installing facilities described in my approved SAP, COP, or GAP? |
| § 285.701 - What must I include in my Facility Design Report? |
| § 285.702 - What must I include in my Fabrication and Installation Report? |
| § 285.703 - What reports must I submit for project modifications and repairs? |
| § 285.704 - [Reserved] |
| Certified Verification Agent |
| § 285.705 - When must I use a Certified Verification Agent (CVA)? |
| § 285.706 - How do I nominate a CVA for BSEE approval? |
| § 285.707 - What are the CVA's primary duties for facility design review? |
| § 285.708 - What are the CVA's or project engineer's primary duties for fabrication and installation review? |
| § 285.709 - When conducting onsite fabrication inspections, what must the CVA or project engineer verify? |
| § 285.710 - When conducting onsite installation inspections, what must the CVA or project engineer do? |
| § 285.711 - [Reserved] |
| § 285.712 - What are the CVA's or project engineer's reporting requirements? |
| § 285.713 - What must I do after the CVA or project engineer confirms conformance with the Fabrication and Installation Report on my commercial lease? |
| § 285.714 - What records relating to SAPs, COPs, and GAPs must I keep? |