Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 60 - Standards of Performance for New Stationary Sources |
Subpart MMMM - Emission Guidelines and Compliance Times for Existing Sewage Sludge Incineration Units |
Table 2 to Subpart MMMM of Part 60 - Model Rule - Emission Limits and Standards for Existing Fluidized Bed Sewage Sludge Incineration Units
Latest version.
-
Table 2 to Subpart MMMM of Part 60 - Model Rule - Emission Limits and Standards for Existing Fluidized Bed Sewage Sludge Incineration Units
For the air pollutant You must meet this emission limita Using these averaging methods and minimum sampling volumes or
durationsAnd determining compliance using this method Particulate matter 18 milligrams per dry standard cubic meter 3-run average (collect a minimum volume of 1 dry standard cubic meters sample per run) Performance test (Method 5 at 40 CFR part 60, appendix A-3; Method 26A or Method 29 at 40 CFR part 60, appendix A-8). Hydrogen chloride 0.51 parts per million by dry volume 3-run average (Collect a minimum volume of 1 dry standard cubic meters per run) Performance test (Method 26A at 40 CFR part 60, appendix A-8). Carbon monoxide 64 parts per million by dry volume 3-run average (collect sample for a minimum duration of one hour per run) Performance test (Method 10, 10A, or 10B at 40 CFR part 60, appendix A-4). Dioxins/furans (total mass basis); or
Dioxins/furans (toxic equivalency basis)b1.2 nanograms per dry standard cubic meter (total mass basis); or
0.10 nanograms per dry standard cubic meter (toxic equivalency basis)3-run average (collect a minimum volume of 1 dry standard cubic meters per run) Performance test (Method 23 at 40 CFR part 60, appendix A-7). Mercury 0.037 milligrams per dry standard cubic meter 3-run average (For Method 29 and ASTM D6784-02 (Reapproved 2008)c, collect a minimum volume of 1 dry standard cubic meters per run. For Method 30B, collect a minimum sample as specified in Method 30B at 40 CFR part 60, appendix A-8) Performance test (Method 29 at 40 CFR part 60, appendix A-8; Method 30B at 40 CFR part 60, appendix A-8; or ASTM D6784-02 (Reapproved 2008).c Oxides of nitrogen 150 parts per million by dry volume 3-run average (Collect sample for a minimum duration of one hour per run) Performance test (Method 7 or 7E at 40 CFR part 60, appendix A-4). Sulfur dioxide 15 parts per million by dry volume 3-run average (For Method 6, collect a minimum volume of 60 liters per run. For Method 6C, collect sample for a minimum duration of one hour per run) Performance test (Method 6 or 6C at 40 CFR part 40, appendix A-4; or ANSI/ASME PTC-19.10-1981.c Cadmium 0.0016 milligrams per dry standard cubic meter 3-run average (collect a minimum volume of 1 dry standard cubic meters per run) Performance test (Method 29 at 40 CFR part 60, appendix A-8). Use GFAAS or ICP/MS for the analytical finish. Lead 0.0074 milligrams per dry standard cubic meter 3-run average (collect a minimum volume of 1 dry standard cubic meters sample per run) Performance test (Method 29 at 40 CFR part 60, appendix A-8. Use GFAAS or ICP/MS for the analytical finish. Fugitive emissions from ash handling Visible emissions of combustion ash from an ash conveying system (including conveyor transfer points) for no more than 5 percent of the hourly observation period Three 1-hour observation periods Visible emission test (Method 22 of appendix A-7 of this part).