Code of Federal Regulations (Last Updated: October 10, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
Figure 1 - Definitions of Terms Used in Wastewater Equations
Latest version.
-
Main Terms AMR=Actual mass removal of Table 8 and/or Table 9 compounds achieved by treatment process or a series of treatment processes, kg/hr. C=Concentration of Table 8 and/or Table 9 compounds in wastewater, ppmw. CG=Concentration of TOC (minus methane and ethane) or total organic hazardous air pollutants, in vented gas stream, dry basis, ppmv. CG c =Concentration of TOC or organic hazardous air pollutants corrected to 3-percent oxygen, in vented gas stream, dry basis, ppmv.CGS=Concentration of sample compounds in vented gas stream, dry basis, ppmv. E=Removal or destruction efficiency, percent. F bio =Site-specific fraction of Table 8 and/or Table 9 compounds biodegraded, unitless.f bio =Site-specific fraction of an individual Table 8 or Table 9 compound biodegraded, unitless.Fm=Compound-specific fraction measured factor, unitless (listed in table 34). Fr=Fraction removal value for Table 8 and/or Table 9 compounds, unitless (listed in Table 9). Fr avg =Flow-weighted average of the Fr values.i=Identifier for a compound. j=Identifier for a sample. k=Identifier for a run. K 2 =Constant, 41.57 * 10−9 , (ppm)−1 (gram-mole per standard m3 ) (kg/g), where standard temperature (gram-mole per standard m3 ) is 20 °C.m=Number of samples. M=Mass, kg. MW=Molecular weight, kg/kg-mole. n=Number of compounds. p=Number of runs. %O 2d =Concentration of oxygen, dry basis, percent by volume.Q=Volumetric flowrate of wastewater, m 3 /hr.QG=Volumetric flow rate of vented gas stream, dry standard, m 3 /min.QMG=Mass flowrate of TOC (minus methane and ethane) or organic hazardous air pollutants, in vented gas stream, kg/hr. QMW=Mass flowrate of Table 8 and/or Table 9 compounds in wastewater, kg/hr. ρ=Density, kg/m 3 .RMR=Required mass removal achieved by treatment process or a series of treatment processes, kg/hr. t T =Total time of all runs, hr.Subscripts a=Entering. b=Exiting. i=Identifier for a compound. j=Identifier for a sample. k=Identifier for a run. m=Number of samples. n=Number of compounds. p=Number of runs. T=Total; sum of individual.